From: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Date: Wed, 29 Jul 2020 09:36:12 +0000 (-0700)
Subject: fu540: dtsi: add reset producer and consumer entries
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ea4e9570ebed70c785e0076c65c5490cbd2c947b;p=u-boot.git

fu540: dtsi: add reset producer and consumer entries

The resets to DDR and ethernet sub-system are connected to
PRCI device reset control register, these reset signals
are active low and are held low at power-up. Add these reset
producer and consumer details needed by the reset driver.

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
---

diff --git a/arch/riscv/dts/fu540-c000-u-boot.dtsi b/arch/riscv/dts/fu540-c000-u-boot.dtsi
index afdb4f4402..5302677ee4 100644
--- a/arch/riscv/dts/fu540-c000-u-boot.dtsi
+++ b/arch/riscv/dts/fu540-c000-u-boot.dtsi
@@ -3,6 +3,8 @@
  * (C) Copyright 2019 SiFive, Inc
  */
 
+#include <dt-bindings/reset/sifive-fu540-prci.h>
+
 / {
 	cpus {
 		assigned-clocks = <&prci PRCI_CLK_COREPLL>;
@@ -59,6 +61,16 @@
 			reg = <0x0 0x2000000 0x0 0xc0000>;
 			u-boot,dm-spl;
 		};
+		prci: clock-controller@10000000 {
+			#reset-cells = <1>;
+			resets = <&prci PRCI_RST_DDR_CTRL_N>,
+				 <&prci PRCI_RST_DDR_AXI_N>,
+				 <&prci PRCI_RST_DDR_AHB_N>,
+				 <&prci PRCI_RST_DDR_PHY_N>,
+				 <&prci PRCI_RST_GEMGXL_N>;
+			reset-names = "ddr_ctrl", "ddr_axi", "ddr_ahb",
+					"ddr_phy", "gemgxl_reset";
+		};
 		dmc: dmc@100b0000 {
 			compatible = "sifive,fu540-c000-ddr";
 			reg = <0x0 0x100b0000 0x0 0x0800