From: Philipp Tomsich Date: Fri, 28 Jul 2017 15:38:42 +0000 (+0200) Subject: dm: timer: normalise SPL and TPL support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e9e5d9d29f747d7c14944129ce523d9d5efe9c0b;p=u-boot.git dm: timer: normalise SPL and TPL support To fully support DM timer in SPL and TPL, we need a few things cleaned up and normalised: - inclusion of the uclass and drivers should be an all-or-nothing decision for each stage and under control of $(SPL_TPL_)TIMER instead of having the two-level configuration with TIMER and $(SPL_TPL_)TIMER_SUPPORT - when $(SPL_TPL_)TIMER is enabled, the ARMv8 generic timer code can not be compiled in This normalises configuration to $(SPL_TPL_)TIMER and moves the config options to drivers/timer/Kconfig (and cleans up the collateral damage to some defconfigs that had SPL_TIMER_SUPPORT enabled). Signed-off-by: Philipp Tomsich Reviewed-by: Simon Glass --- diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile index c447085fe4..1249547436 100644 --- a/arch/arm/cpu/armv8/Makefile +++ b/arch/arm/cpu/armv8/Makefile @@ -8,7 +8,9 @@ extra-y := start.o obj-y += cpu.o +ifndef CONFIG_$(SPL_TPL_)TIMER obj-y += generic_timer.o +endif obj-y += cache_v8.o obj-y += exceptions.o obj-y += cache.o diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 192f7f66dd..5176857506 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -603,14 +603,6 @@ config SPL_SPI_SUPPORT enable SPI drivers that are needed for other purposes also, such as a SPI PMIC. -config SPL_TIMER_SUPPORT - bool "Support timer drivers" - help - Enable support for timer drivers in SPL. These can be used to get - a timer value when in SPL, or perhaps for implementing a delay - function. This enables the drivers in drivers/timer as part of an - SPL build. - config SPL_USB_HOST_SUPPORT bool "Support USB host drivers" help diff --git a/configs/chromebook_link64_defconfig b/configs/chromebook_link64_defconfig index 34b9a56ee6..f01b98da4d 100644 --- a/configs/chromebook_link64_defconfig +++ b/configs/chromebook_link64_defconfig @@ -27,7 +27,7 @@ CONFIG_SPL_NET_SUPPORT=y CONFIG_SPL_PCI_SUPPORT=y CONFIG_SPL_PCH_SUPPORT=y CONFIG_SPL_RTC_SUPPORT=y -CONFIG_SPL_TIMER_SUPPORT=y +CONFIG_SPL_TIMER=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig index 0c40788e3f..44a15368ce 100644 --- a/configs/qemu-x86_64_defconfig +++ b/configs/qemu-x86_64_defconfig @@ -26,7 +26,7 @@ CONFIG_SPL_NET_SUPPORT=y CONFIG_SPL_PCI_SUPPORT=y CONFIG_SPL_PCH_SUPPORT=y CONFIG_SPL_RTC_SUPPORT=y -CONFIG_SPL_TIMER_SUPPORT=y +CONFIG_SPL_TIMER=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set diff --git a/drivers/Makefile b/drivers/Makefile index a41444ace1..0e0fdf0208 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/ obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/ obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/ obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/ +obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/ ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_BUILD @@ -38,7 +39,6 @@ obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/ obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/ obj-$(CONFIG_SPL_PCH_SUPPORT) += pch/ obj-$(CONFIG_SPL_RTC_SUPPORT) += rtc/ -obj-$(CONFIG_SPL_TIMER_SUPPORT) += timer/ obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/ obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/ obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/ @@ -83,7 +83,6 @@ obj-y += scsi/ obj-y += sound/ obj-y += spmi/ obj-y += sysreset/ -obj-y += timer/ obj-y += tpm/ obj-y += video/ obj-y += watchdog/ diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig index c666303331..ac4832be20 100644 --- a/drivers/timer/Kconfig +++ b/drivers/timer/Kconfig @@ -9,6 +9,24 @@ config TIMER will be used. The timer is usually a 32 bits free-running up counter. There may be no real tick, and no timer interrupt. +config SPL_TIMER + bool "Enable driver model for timer drivers in SPL" + depends on TIMER && SPL + help + Enable support for timer drivers in SPL. These can be used to get + a timer value when in SPL, or perhaps for implementing a delay + function. This enables the drivers in drivers/timer as part of an + SPL build. + +config TPL_TIMER + bool "Enable driver model for timer drivers in TPL" + depends on TIMER && TPL + help + Enable support for timer drivers in TPL. These can be used to get + a timer value when in TPL, or perhaps for implementing a delay + function. This enables the drivers in drivers/timer as part of an + TPL build. + config TIMER_EARLY bool "Allow timer to be used early in U-Boot" depends on TIMER diff --git a/drivers/timer/Makefile b/drivers/timer/Makefile index ced7bd66bd..d16ea5391e 100644 --- a/drivers/timer/Makefile +++ b/drivers/timer/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_TIMER) += timer-uclass.o +obj-y += timer-uclass.o obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o obj-$(CONFIG_SANDBOX_TIMER) += sandbox_timer.o obj-$(CONFIG_X86_TSC_TIMER) += tsc_timer.o