From: Patrice Chotard Date: Mon, 26 Aug 2019 11:50:31 +0000 (+0200) Subject: regulator: fixed: Modify enable-active-high behavior X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e8e9715df2d408c57d14addff94105001c82f2ac;p=u-boot.git regulator: fixed: Modify enable-active-high behavior Regulator should not be enabled at probe time if regulator-boot-on property is not in the dt node. "enable-active-high" property is only used to indicate the GPIO polarity. See kernel documentation : - Documentation/devicetree/bindings/regulator/fixed-regulator.yaml - Documentation/devicetree/bindings/regulator/gpio-regulator.yaml Signed-off-by: Christophe Kerello Signed-off-by: Patrice Chotard --- diff --git a/drivers/power/regulator/regulator_common.c b/drivers/power/regulator/regulator_common.c index 3dabbe2a85..2041086567 100644 --- a/drivers/power/regulator/regulator_common.c +++ b/drivers/power/regulator/regulator_common.c @@ -12,10 +12,15 @@ int regulator_common_ofdata_to_platdata(struct udevice *dev, struct regulator_common_platdata *dev_pdata, const char *enable_gpio_name) { struct gpio_desc *gpio; + struct dm_regulator_uclass_platdata *uc_pdata; int flags = GPIOD_IS_OUT; int ret; - if (dev_read_bool(dev, "enable-active-high")) + uc_pdata = dev_get_uclass_platdata(dev); + + if (!dev_read_bool(dev, "enable-active-high")) + flags |= GPIOD_ACTIVE_LOW; + if (uc_pdata->boot_on) flags |= GPIOD_IS_OUT_ACTIVE; /* Get optional enable GPIO desc */