From: Stefan Roese Date: Mon, 24 Apr 2017 15:45:23 +0000 (+0300) Subject: phy: marvell: cp110: update utmi phy connection type X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e89acc4bf1bfa9239e03a737ed8967ffcc71f5f7;p=u-boot.git phy: marvell: cp110: update utmi phy connection type UTMI_PHY_TO_USB_HOST was used in USB3 UTMI dts node only, but there will be USB2 UTMI dts node for some SoCs that have got USB2 controller, so rename TO_USB_HOST to TO_USB3_HOST to distinguish TO_USB2_HOST in later on patches. Signed-off-by: zachary Signed-off-by: Stefan Roese Signed-off-by: Igal Liberman Reviewed-by: Stefan Roese --- diff --git a/arch/arm/dts/armada-cp110-master.dtsi b/arch/arm/dts/armada-cp110-master.dtsi index 56c1a1232c..8c336f2c38 100644 --- a/arch/arm/dts/armada-cp110-master.dtsi +++ b/arch/arm/dts/armada-cp110-master.dtsi @@ -253,7 +253,7 @@ reg = <0x580000 0x1000>, /* utmi-unit */ <0x440420 0x4>, /* usb-cfg */ <0x440440 0x4>; /* utmi-cfg */ - utmi-port = ; + utmi-port = ; status = "disabled"; }; @@ -262,7 +262,7 @@ reg = <0x581000 0x1000>, /* utmi-unit */ <0x440420 0x4>, /* usb-cfg */ <0x440444 0x4>; /* utmi-cfg */ - utmi-port = ; + utmi-port = ; status = "disabled"; }; diff --git a/arch/arm/dts/armada-cp110-slave.dtsi b/arch/arm/dts/armada-cp110-slave.dtsi index 5876391449..0cdb3d3ae3 100644 --- a/arch/arm/dts/armada-cp110-slave.dtsi +++ b/arch/arm/dts/armada-cp110-slave.dtsi @@ -254,7 +254,7 @@ reg = <0x580000 0x1000>, /* utmi-unit */ <0x440420 0x4>, /* usb-cfg */ <0x440440 0x4>; /* utmi-cfg */ - utmi-port = ; + utmi-port = ; status = "disabled"; }; }; diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c index 70554fe0cb..8bec0abf75 100644 --- a/drivers/phy/marvell/comphy_cp110.c +++ b/drivers/phy/marvell/comphy_cp110.c @@ -1304,7 +1304,7 @@ static void comphy_utmi_power_down(u32 utmi_index, void __iomem *utmi_base_addr, * If UTMI connected to USB Device, configure mux prior to PHY init * (Device can be connected to UTMI0 or to UTMI1) */ - if (utmi_phy_port == UTMI_PHY_TO_USB_DEVICE0) { + if (utmi_phy_port == UTMI_PHY_TO_USB3_DEVICE0) { debug("stage: UTMI %d - Enable Device mode and configure UTMI mux\n", utmi_index); /* USB3 Device UTMI enable */ @@ -1496,7 +1496,8 @@ static void comphy_utmi_phy_init(u32 utmi_phy_count, continue; } printf("UTMI PHY %d initialized to ", i); - if (cp110_utmi_data[i].utmi_phy_port == UTMI_PHY_TO_USB_DEVICE0) + if (cp110_utmi_data[i].utmi_phy_port == + UTMI_PHY_TO_USB3_DEVICE0) printf("USB Device\n"); else printf("USB Host%d\n", diff --git a/include/dt-bindings/comphy/comphy_data.h b/include/dt-bindings/comphy/comphy_data.h index 8fd578aeaf..d127388371 100644 --- a/include/dt-bindings/comphy/comphy_data.h +++ b/include/dt-bindings/comphy/comphy_data.h @@ -52,9 +52,9 @@ #define PHY_POLARITY_ALL_INVERT \ (PHY_POLARITY_TXD_INVERT | PHY_POLARITY_RXD_INVERT) -#define UTMI_PHY_TO_USB_HOST0 0 -#define UTMI_PHY_TO_USB_HOST1 1 -#define UTMI_PHY_TO_USB_DEVICE0 2 +#define UTMI_PHY_TO_USB3_HOST0 0 +#define UTMI_PHY_TO_USB3_HOST1 1 +#define UTMI_PHY_TO_USB3_DEVICE0 2 #define UTMI_PHY_INVALID 0xff #endif /* _COMPHY_DATA_H_ */