From: Shawn Guo <shawn.guo@linaro.org>
Date: Tue, 18 Dec 2018 09:52:06 +0000 (+0800)
Subject: poplar: add DWC2 OTG gadget support
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e7ab6dfc65f3656bf0df9e818dc12ad33be26d44;p=u-boot.git

poplar: add DWC2 OTG gadget support

It enables DWC2 OTG gadget driver support for Poplar board.  As
usb2_phy_init() is being always called from board_init(), we can save
the call from board_usb_init().

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---

diff --git a/arch/arm/include/asm/arch-hi3798cv200/hi3798cv200.h b/arch/arm/include/asm/arch-hi3798cv200/hi3798cv200.h
index f97b1eb29f..bb221e17e0 100644
--- a/arch/arm/include/asm/arch-hi3798cv200/hi3798cv200.h
+++ b/arch/arm/include/asm/arch-hi3798cv200/hi3798cv200.h
@@ -13,11 +13,16 @@
 /* DEVICES */
 #define REG_BASE_MCI			0xF9830000
 #define REG_BASE_UART0			0xF8B00000
+#define HIOTG_BASE_ADDR			0xF98C0000
 
 /* PERI control registers (4KB) */
 	/* USB2 PHY01 configuration register */
 #define PERI_CTRL_USB0			(REG_BASE_PERI_CTRL + 0x120)
 
+	/* USB2 controller configuration register */
+#define PERI_CTRL_USB3			(REG_BASE_PERI_CTRL + 0x12c)
+#define USB2_2P_CHIPID			(1 << 28)
+
 /* PERI CRG registers (4KB) */
 	/* USB2 CTRL0 clock and soft reset */
 #define PERI_CRG46			(REG_BASE_CRG + 0xb8)
diff --git a/board/hisilicon/poplar/poplar.c b/board/hisilicon/poplar/poplar.c
index 8adc750962..155dfbb401 100644
--- a/board/hisilicon/poplar/poplar.c
+++ b/board/hisilicon/poplar/poplar.c
@@ -166,6 +166,34 @@ int board_mmc_init(bd_t *bis)
 	return ret;
 }
 
+#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
+#include <usb.h>
+#include <usb/dwc2_udc.h>
+#include <g_dnl.h>
+
+static struct dwc2_plat_otg_data poplar_otg_data = {
+	.regs_otg = HIOTG_BASE_ADDR
+};
+
+static void set_usb_to_device(void)
+{
+	setbits_le32(PERI_CTRL_USB3, USB2_2P_CHIPID);
+}
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+	set_usb_to_device();
+	return dwc2_udc_probe(&poplar_otg_data);
+}
+
+int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
+{
+	if (!env_get("serial#"))
+		g_dnl_set_serialnumber("0123456789POPLAR");
+	return 0;
+}
+#endif
+
 int board_init(void)
 {
 	usb2_phy_init();