From: Nikita Kiryanov Date: Wed, 14 Jan 2015 08:42:43 +0000 (+0200) Subject: compulab: eeprom: allow reading mac address from multiple eeproms X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e7a2447ba2d8483b7d029e77c59b0ee26eeabe88;p=u-boot.git compulab: eeprom: allow reading mac address from multiple eeproms Implement the option to select the eeprom i2c bus when reading mac address. Signed-off-by: Nikita Kiryanov Cc: Stefano Babic Cc: Igor Grinberg Cc: Ilya Ledvich Cc: Dmitry Lifshitz Acked-by: Igor Grinberg --- diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index 5ddf8c6688..32f4434b65 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -354,7 +354,7 @@ static int handle_mac_address(void) if (rc) return 0; - rc = cl_eeprom_read_mac_addr(enetaddr); + rc = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS); if (rc) return rc; diff --git a/board/compulab/cm_t335/cm_t335.c b/board/compulab/cm_t335/cm_t335.c index 9583149bed..592ef3d30f 100644 --- a/board/compulab/cm_t335/cm_t335.c +++ b/board/compulab/cm_t335/cm_t335.c @@ -110,7 +110,7 @@ static int handle_mac_address(void) if (rv) return 0; - rv = cl_eeprom_read_mac_addr(enetaddr); + rv = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS); if (rv) get_efuse_mac_addr(enetaddr); diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c index 43463d5b47..9a3b2ee72f 100644 --- a/board/compulab/cm_t35/cm_t35.c +++ b/board/compulab/cm_t35/cm_t35.c @@ -429,7 +429,7 @@ static int handle_mac_address(void) if (rc) return 0; - rc = cl_eeprom_read_mac_addr(enetaddr); + rc = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS); if (rc) return rc; diff --git a/board/compulab/cm_t3517/cm_t3517.c b/board/compulab/cm_t3517/cm_t3517.c index cac1ad9ef1..624cf4c034 100644 --- a/board/compulab/cm_t3517/cm_t3517.c +++ b/board/compulab/cm_t3517/cm_t3517.c @@ -163,7 +163,7 @@ static int cm_t3517_handle_mac_address(void) if (ret) return 0; - ret = cl_eeprom_read_mac_addr(enetaddr); + ret = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS); if (ret) { ret = am3517_get_efuse_enetaddr(enetaddr); if (ret) diff --git a/board/compulab/cm_t54/cm_t54.c b/board/compulab/cm_t54/cm_t54.c index 2c2530ab3f..fdea909ff7 100644 --- a/board/compulab/cm_t54/cm_t54.c +++ b/board/compulab/cm_t54/cm_t54.c @@ -165,7 +165,7 @@ static int handle_mac_address(void) if (ret) return 0; - ret = cl_eeprom_read_mac_addr(enetaddr); + ret = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS); if (ret || !is_valid_ether_addr(enetaddr)) generate_mac_addr(enetaddr); diff --git a/board/compulab/common/eeprom.c b/board/compulab/common/eeprom.c index a45e7be11f..77bcea44b4 100644 --- a/board/compulab/common/eeprom.c +++ b/board/compulab/common/eeprom.c @@ -31,6 +31,7 @@ #define LAYOUT_INVALID 0 #define LAYOUT_LEGACY 0xff +static int cl_eeprom_bus; static int cl_eeprom_layout; /* Implicitly LAYOUT_INVALID */ static int cl_eeprom_read(uint offset, uchar *buf, int len) @@ -38,7 +39,7 @@ static int cl_eeprom_read(uint offset, uchar *buf, int len) int res; unsigned int current_i2c_bus = i2c_get_bus_num(); - res = i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS); + res = i2c_set_bus_num(cl_eeprom_bus); if (res < 0) return res; @@ -50,13 +51,18 @@ static int cl_eeprom_read(uint offset, uchar *buf, int len) return res; } -static int cl_eeprom_setup_layout(void) +static int cl_eeprom_setup(uint eeprom_bus) { int res; - if (cl_eeprom_layout != LAYOUT_INVALID) + /* + * We know the setup was already done when the layout is set to a valid + * value and we're using the same bus as before. + */ + if (cl_eeprom_layout != LAYOUT_INVALID && eeprom_bus == cl_eeprom_bus) return 0; + cl_eeprom_bus = eeprom_bus; res = cl_eeprom_read(EEPROM_LAYOUT_VER_OFFSET, (uchar *)&cl_eeprom_layout, 1); if (res) { @@ -77,7 +83,7 @@ void get_board_serial(struct tag_serialnr *serialnr) memset(serialnr, 0, sizeof(*serialnr)); - if (cl_eeprom_setup_layout()) + if (cl_eeprom_setup(CONFIG_SYS_I2C_EEPROM_BUS)) return; offset = (cl_eeprom_layout != LAYOUT_LEGACY) ? @@ -96,11 +102,11 @@ void get_board_serial(struct tag_serialnr *serialnr) * Routine: cl_eeprom_read_mac_addr * Description: read mac address and store it in buf. */ -int cl_eeprom_read_mac_addr(uchar *buf) +int cl_eeprom_read_mac_addr(uchar *buf, uint eeprom_bus) { uint offset; - if (cl_eeprom_setup_layout()) + if (cl_eeprom_setup(eeprom_bus)) return 0; offset = (cl_eeprom_layout != LAYOUT_LEGACY) ? @@ -123,7 +129,7 @@ u32 cl_eeprom_get_board_rev(void) if (board_rev) return board_rev; - if (cl_eeprom_setup_layout()) + if (cl_eeprom_setup(CONFIG_SYS_I2C_EEPROM_BUS)) return 0; if (cl_eeprom_layout != LAYOUT_LEGACY) diff --git a/board/compulab/common/eeprom.h b/board/compulab/common/eeprom.h index 85d5bf03d6..50c6b0226f 100644 --- a/board/compulab/common/eeprom.h +++ b/board/compulab/common/eeprom.h @@ -11,10 +11,10 @@ #define _EEPROM_ #ifdef CONFIG_SYS_I2C -int cl_eeprom_read_mac_addr(uchar *buf); +int cl_eeprom_read_mac_addr(uchar *buf, uint eeprom_bus); u32 cl_eeprom_get_board_rev(void); #else -static inline int cl_eeprom_read_mac_addr(uchar *buf) +static inline int cl_eeprom_read_mac_addr(uchar *buf, uint eeprom_bus) { return 1; }