From: Samuel Holland Date: Thu, 22 Oct 2020 02:12:16 +0000 (-0500) Subject: sunxi: binman: Add support for including SCP firmware X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e72a6be4fc071930016903638e1e493ab5d3be8a;p=u-boot.git sunxi: binman: Add support for including SCP firmware Allwinner sun50i SoCs contain an OpenRISC 1000 CPU that functions as a System Control Processor, or SCP. ARM Trusted Firmware (ATF) communicates with the SCP over SCPI to implement the PSCI system suspend, shutdown and reset functionality. Currently, SCP firmware is optional; the system will boot and run without it, but system suspend will be unavailable. Since all communication with the SCP is mediated by ATF, the only thing U-Boot needs to do is load the firmware into SRAM. The SCP firmware occupies the last 16KiB of SRAM A2, immediately following ATF. Reviewed-by: Simon Glass Signed-off-by: Samuel Holland Reviewed-by: Jagan Teki --- diff --git a/arch/arm/dts/sunxi-u-boot.dtsi b/arch/arm/dts/sunxi-u-boot.dtsi index 9f5b103cbb..c77cf7cacf 100644 --- a/arch/arm/dts/sunxi-u-boot.dtsi +++ b/arch/arm/dts/sunxi-u-boot.dtsi @@ -2,8 +2,10 @@ #ifdef CONFIG_MACH_SUN50I_H6 #define BL31_ADDR 0x104000 +#define SCP_ADDR 0x114000 #else #define BL31_ADDR 0x44000 +#define SCP_ADDR 0x50000 #endif / { @@ -59,6 +61,19 @@ }; }; + scp { + description = "SCP firmware"; + type = "firmware"; + arch = "or1k"; + compression = "none"; + load = ; + + scp { + filename = "scp.bin"; + missing-msg = "scp-sunxi"; + }; + }; + @fdt-SEQ { description = "NAME"; type = "flat_dt"; @@ -72,7 +87,7 @@ @config-SEQ { description = "NAME"; firmware = "atf"; - loadables = "uboot"; + loadables = "scp", "uboot"; fdt = "fdt-SEQ"; }; }; diff --git a/board/sunxi/README.sunxi64 b/board/sunxi/README.sunxi64 index 258921af22..4803bc9ff2 100644 --- a/board/sunxi/README.sunxi64 +++ b/board/sunxi/README.sunxi64 @@ -14,8 +14,12 @@ Quick Start / Overview - Build the ARM Trusted Firmware binary (see "ARM Trusted Firmware (ATF)" below) $ cd /src/arm-trusted-firmware $ make PLAT=sun50i_a64 DEBUG=1 bl31 +- Build the SCP firmware binary (see "SCP firmware (Crust)" below) + $ cd /src/crust + $ make pine64_plus_defconfig && make -j5 scp - Build U-Boot (see "SPL/U-Boot" below) $ export BL31=/path/to/bl31.bin + $ export SCP=/src/crust/build/scp/scp.bin $ make pine64_plus_defconfig && make -j5 - Transfer to an uSD card (see "microSD card" below) $ dd if=u-boot-sunxi-with-spl.bin of=/dev/sdx bs=8k seek=1 @@ -24,13 +28,17 @@ Quick Start / Overview Building the firmware ===================== -The Allwinner A64/H5 firmware consists of three parts: U-Boot's SPL, an -ARM Trusted Firmware (ATF) build and the U-Boot proper. -The SPL will load both ATF and U-Boot proper along with the right device -tree blob (.dtb) and will pass execution to ATF (in EL3), which in turn will -drop into the U-Boot proper (in EL2). -As the ATF binary will become part of the U-Boot image file, you will need -to build it first. +The Allwinner A64/H5/H6 firmware consists of several parts: U-Boot's SPL, +ARM Trusted Firmware (ATF), optional System Control Processor (SCP) firmware +(e.g. Crust), and the U-Boot proper. + +The SPL will load all of the other firmware binaries into RAM, along with the +right device tree blob (.dtb), and will pass execution to ATF (in EL3). If SCP +firmware was loaded, ATF will power on the SCP and wait for it to boot. +ATF will then drop into U-Boot proper (in EL2). + +As the ATF binary and SCP firmware will become part of the U-Boot image file, +you will need to build them first. ARM Trusted Firmware (ATF) ---------------------------- @@ -53,6 +61,31 @@ As sometimes the ATF build process is a bit picky about the toolchain used, or if you can't be bothered with building ATF, there are known working binaries in the firmware repository[3], purely for convenience reasons. + SCP firmware (Crust) +---------------------- +SCP firmware is responsible for implementing system suspend/resume, and (on +boards without a PMIC) soft poweroff/on. ATF contains fallback code for CPU +power control, so SCP firmware is optional if you don't need either of these +features. It runs on the AR100, with is an or1k CPU, not ARM, so it needs a +different cross toolchain. + +There is one SCP firmware implementation currently available, Crust: +$ git clone https://github.com/crust-firmware/crust +$ cd crust +$ export CROSS_COMPILE=or1k-linux-musl- +$ make pine64_plus_defconfig +$ make scp + +The same configuration generally works on any board with the same SoC (A64, H5, +or H6), so if there is no config for your board, use one for a similar board. + +Like for ATF, U-Boot finds the SCP firmware binary via an environment variable: +$ export SCP=/src/crust/build/scp/scp.bin + +If you do not want to use SCP firmware, you can silence the warning from binman +by pointing it to an empty file: +$ export SCP=/dev/null + SPL/U-Boot ------------ Both U-Boot proper and the SPL are using the 64-bit mode. As the boot ROM diff --git a/tools/binman/missing-blob-help b/tools/binman/missing-blob-help index 7cf1c34610..f7bc80ea83 100644 --- a/tools/binman/missing-blob-help +++ b/tools/binman/missing-blob-help @@ -13,3 +13,7 @@ Firmware and build with BL31=/path/to/bl31.bin atf-bl31-sunxi: Please read the section on ARM Trusted Firmware (ATF) in board/sunxi/README.sunxi64 + +scp-sunxi: +SCP firmware is required for system suspend, but is otherwise optional. +Please read the section on SCP firmware in board/sunxi/README.sunxi64