From: Heinrich Schuchardt Date: Thu, 27 Feb 2020 17:28:00 +0000 (+0100) Subject: block: ide: use definitions from include/libata.h X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e6e9a4f0a9e74a079c10f7650c0386ee49e04e44;p=u-boot.git block: ide: use definitions from include/libata.h Currently ATA commands are defined both in include/libata.h and include/ata.h. Use the command definitions from include/libata.h where applicable. Signed-off-by: Heinrich Schuchardt Reviewed-by: Simon Glass --- diff --git a/drivers/block/ide.c b/drivers/block/ide.c index 4b8a4eac17..67cc4fbc02 100644 --- a/drivers/block/ide.c +++ b/drivers/block/ide.c @@ -231,7 +231,7 @@ unsigned char atapi_issue(int device, unsigned char *ccb, int ccblen, (unsigned char) ((buflen >> 8) & 0xFF)); ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device)); - ide_outb(device, ATA_COMMAND, ATAPI_CMD_PACKET); + ide_outb(device, ATA_COMMAND, ATA_CMD_PACKET); udelay(50); mask = ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR; @@ -570,7 +570,7 @@ static void ide_ident(struct blk_desc *dev_desc) /* * Start Ident Command */ - ide_outb(device, ATA_COMMAND, ATAPI_CMD_IDENT); + ide_outb(device, ATA_COMMAND, ATA_CMD_ID_ATAPI); /* * Wait for completion - ATAPI devices need more time * to become ready @@ -582,7 +582,7 @@ static void ide_ident(struct blk_desc *dev_desc) /* * Start Ident Command */ - ide_outb(device, ATA_COMMAND, ATA_CMD_IDENT); + ide_outb(device, ATA_COMMAND, ATA_CMD_ID_ATA); /* * Wait for completion @@ -966,7 +966,7 @@ ulong ide_read(struct blk_desc *block_dev, lbaint_t blknr, lbaint_t blkcnt, /* first check if the drive is in Powersaving mode, if yes, * increase the timeout value */ - ide_outb(device, ATA_COMMAND, ATA_CMD_CHK_PWR); + ide_outb(device, ATA_COMMAND, ATA_CMD_CHK_POWER); udelay(50); c = ide_wait(device, IDE_TIME_OUT); /* can't take over 500 ms */