From: Heinrich Schuchardt <xypron.glpk@gmx.de>
Date: Fri, 25 Dec 2020 15:22:27 +0000 (+0100)
Subject: imx: mx7: clock: use correct format strings
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e6abe163bf0b81d2ff6cfbc849252bb30b0d6a19;p=u-boot.git

imx: mx7: clock: use correct format strings

Use %u and not %d for unsigned values.
Print kHz and not khz.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---

diff --git a/arch/arm/mach-imx/mx7/clock.c b/arch/arm/mach-imx/mx7/clock.c
index aba9461d92..6a1bad855e 100644
--- a/arch/arm/mach-imx/mx7/clock.c
+++ b/arch/arm/mach-imx/mx7/clock.c
@@ -916,7 +916,7 @@ void mxs_set_lcdclk(uint32_t base_addr, uint32_t freq)
 		}
 
 		if (5 == i) {
-			printf("Fail to set rate to %dkhz", freq);
+			printf("Fail to set rate to %u kHz", freq);
 			return;
 		}
 	}
@@ -936,7 +936,7 @@ void mxs_set_lcdclk(uint32_t base_addr, uint32_t freq)
 	}
 
 	if (best == 0) {
-		printf("Fail to set rate to %dkhz", freq);
+		printf("Fail to set rate to %u kHz", freq);
 		return;
 	}
 
@@ -1115,17 +1115,17 @@ int do_mx7_showclocks(struct cmd_tbl *cmdtp, int flag, int argc,
 
 	printf("\n");
 
-	printf("IPG        %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
-	printf("UART       %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
+	printf("IPG        %8u kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
+	printf("UART       %8u kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
 #ifdef CONFIG_MXC_SPI
-	printf("CSPI       %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000);
+	printf("CSPI       %8u kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000);
 #endif
-	printf("AHB        %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
-	printf("AXI        %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000);
-	printf("DDR        %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000);
-	printf("USDHC1     %8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000);
-	printf("USDHC2     %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000);
-	printf("USDHC3     %8d kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000);
+	printf("AHB        %8u kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
+	printf("AXI        %8u kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000);
+	printf("DDR        %8u kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000);
+	printf("USDHC1     %8u kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000);
+	printf("USDHC2     %8u kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000);
+	printf("USDHC3     %8u kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000);
 
 	return 0;
 }