From: Masahiro Yamada Date: Fri, 8 Jan 2016 16:51:16 +0000 (+0900) Subject: ARM: uniphier: fix recommended board setting in document X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e69514cc7087255d0e9754a9bf04129309d81ed5;p=u-boot.git ARM: uniphier: fix recommended board setting in document The mem_is_flash() in arch/arm/mach-uniphier/micro-support_card.c writes/reads the tail of each NOR flash bank to check if the device really resides there. If CS1_SPLIT were enabled, the support card would always require two NOR flash devices to be inserted for the correct NOR detection. This is not probably what we want. Signed-off-by: Masahiro Yamada --- diff --git a/doc/README.uniphier b/doc/README.uniphier index f0f5346f53..bce70cf5fe 100644 --- a/doc/README.uniphier +++ b/doc/README.uniphier @@ -119,7 +119,7 @@ The recommended bit switch settings are as follows: SW8 OFF(1)/ON(0) Description ------------------------------------------ - bit 1 ----> CS1_SPLIT + bit 1 <---- CS1_SPLIT bit 2 <---- CASE9_ON bit 3 <---- CASE10_ON bit 4 Don't Care Reserve