From: Vikas Manocha Date: Fri, 3 Jul 2015 01:29:41 +0000 (-0700) Subject: stv0991: enable cadence qspi controller & spi flash X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e67abcaacb8271a58c1a5e5afb17475bd8c3deaf;p=u-boot.git stv0991: enable cadence qspi controller & spi flash This patch does all the board configurations required to use the qspi controller & attached spi flash memory. Signed-off-by: Vikas Manocha Reviewed-by: Jagannadh Teki --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 192d9cf3f0..0d2a808fe2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -227,6 +227,9 @@ config TARGET_STV0991 select CPU_V7 select DM select DM_SERIAL + select DM_SPI + select DM_SPI_FLASH + select SPI_FLASH config TARGET_X600 bool "Support x600" diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index 718ef40d50..887f31a84d 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -75,4 +75,19 @@ #define CONFIG_BOOTCOMMAND "go 0x40040000" #define CONFIG_OF_LIBFDT + +/* ++ * QSPI support ++ */ +#ifdef CONFIG_OF_CONTROL /* QSPI is controlled via DT */ +#define CONFIG_CADENCE_QSPI +#define CONFIG_CQSPI_DECODER 0 +#define CONFIG_CQSPI_REF_CLK ((30/4)/2)*1000*1000 +#define CONFIG_CMD_SPI + +#define CONFIG_SPI_FLASH_STMICRO /* Micron/Numonyx flash */ +#define CONFIG_SPI_FLASH_WINBOND /* WINBOND */ +#define CONFIG_CMD_SF +#endif + #endif /* __CONFIG_H */