From: Simon Glass Date: Sat, 12 Mar 2016 05:06:51 +0000 (-0700) Subject: x86: Allow use of serial soon after relocation X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e4d6ab0c2cb8456f80d0ee4e123a34029d5a5c41;p=u-boot.git x86: Allow use of serial soon after relocation At present on x86 machines with use cache-as-RAM, the memory goes away just before board_init_r() is called. This means that serial drivers are no-longer unavailable, until initr_dm() it called, etc. Any attempt to use printf() within this period will cause a hang. To fix this, mark the serial devices as 'unavailable' when it is no-longer available. Bring it back when serial_initialize() is called. This means that the debug UART will be used instead for this period. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- diff --git a/common/board_f.c b/common/board_f.c index 622093a391..109025a68d 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -1095,6 +1095,13 @@ void board_init_f_r(void) if (initcall_run_list(init_sequence_f_r)) hang(); + /* + * The pre-relocation drivers may be using memory that has now gone + * away. Mark serial as unavailable - this will fall back to the debug + * UART if available. + */ + gd->flags &= ~GD_FLG_SERIAL_READY; + /* * U-Boot has been copied into SDRAM, the BSS has been cleared etc. * Transfer execution from Flash to RAM by calculating the address diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index f154eb156c..0ce5c44f33 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -115,7 +115,7 @@ int serial_init(void) /* Called after relocation */ void serial_initialize(void) { - serial_find_console_or_panic(); + serial_init(); } static void _serial_putc(struct udevice *dev, char ch)