From: Alexander Dahl Date: Wed, 20 Mar 2024 09:02:11 +0000 (+0100) Subject: mtd: nand: raw: Fix (most) Kconfig indentation X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e3b7545eb111b544c94c6f1cdd2e6f4252de0211;p=u-boot.git mtd: nand: raw: Fix (most) Kconfig indentation One tab in general. One tab plus two spaces for help text. Link: https://lore.kernel.org/all/20240320090214.40465-4-ada@thorsis.com Signed-off-by: Alexander Dahl Reviewed-by: Michael Trimarchi Signed-off-by: Dario Binacchi --- diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 24809ac5a7..9f3f1267cb 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -1,6 +1,6 @@ - menuconfig MTD_RAW_NAND bool "Raw NAND Device Support" + if MTD_RAW_NAND config SYS_NAND_SELF_INIT @@ -49,12 +49,12 @@ config SYS_NAND_NO_SUBPAGE_WRITE depends on NAND_ARASAN || NAND_DAVINCI || NAND_KIRKWOOD config DM_NAND_ATMEL - bool "Support Atmel NAND controller with DM support" - select SYS_NAND_SELF_INIT - imply SYS_NAND_USE_FLASH_BBT - help - Enable this driver for NAND flash platforms using an Atmel NAND - controller. + bool "Support Atmel NAND controller with DM support" + select SYS_NAND_SELF_INIT + imply SYS_NAND_USE_FLASH_BBT + help + Enable this driver for NAND flash platforms using an Atmel NAND + controller. config NAND_ATMEL bool "Support Atmel NAND controller" @@ -133,35 +133,35 @@ config NAND_BRCMNAND_6753 Enable support for broadcom nand driver on bcm6753. config NAND_BRCMNAND_68360 - bool "Support Broadcom NAND controller on bcm68360" - depends on NAND_BRCMNAND && BCM6856 - help - Enable support for broadcom nand driver on bcm68360. + bool "Support Broadcom NAND controller on bcm68360" + depends on NAND_BRCMNAND && BCM6856 + help + Enable support for broadcom nand driver on bcm68360. config NAND_BRCMNAND_6838 - bool "Support Broadcom NAND controller on bcm6838" - depends on NAND_BRCMNAND && ARCH_BMIPS && SOC_BMIPS_BCM6838 - help - Enable support for broadcom nand driver on bcm6838. + bool "Support Broadcom NAND controller on bcm6838" + depends on NAND_BRCMNAND && ARCH_BMIPS && SOC_BMIPS_BCM6838 + help + Enable support for broadcom nand driver on bcm6838. config NAND_BRCMNAND_6858 - bool "Support Broadcom NAND controller on bcm6858" - depends on NAND_BRCMNAND && BCM6858 - help - Enable support for broadcom nand driver on bcm6858. + bool "Support Broadcom NAND controller on bcm6858" + depends on NAND_BRCMNAND && BCM6858 + help + Enable support for broadcom nand driver on bcm6858. config NAND_BRCMNAND_63158 - bool "Support Broadcom NAND controller on bcm63158" - depends on NAND_BRCMNAND && BCM63158 - help - Enable support for broadcom nand driver on bcm63158. + bool "Support Broadcom NAND controller on bcm63158" + depends on NAND_BRCMNAND && BCM63158 + help + Enable support for broadcom nand driver on bcm63158. config NAND_BRCMNAND_IPROC - bool "Support Broadcom NAND controller on the iproc family" - depends on NAND_BRCMNAND - help - Enable support for broadcom nand driver on the Broadcom - iproc family such as Northstar (BCM5301x, BCM4708...) + bool "Support Broadcom NAND controller on the iproc family" + depends on NAND_BRCMNAND + help + Enable support for broadcom nand driver on the Broadcom + iproc family such as Northstar (BCM5301x, BCM4708...) config NAND_DAVINCI bool "Support TI Davinci NAND controller" @@ -413,10 +413,10 @@ config NAND_VF610_NFC if NAND_VF610_NFC config NAND_VF610_NFC_DT - bool "Support Vybrid's vf610 NAND controller as a DT device" - depends on OF_CONTROL && DM_MTD - help - Enable the driver for Vybrid's vf610 NAND flash on platforms + bool "Support Vybrid's vf610 NAND controller as a DT device" + depends on OF_CONTROL && DM_MTD + help + Enable the driver for Vybrid's vf610 NAND flash on platforms using device tree. choice @@ -472,11 +472,11 @@ config NAND_SUNXI select SPL_NAND_SUPPORT select SPL_SYS_NAND_SELF_INIT imply CMD_NAND - ---help--- - Enable support for NAND. This option enables the standard and - SPL drivers. - The SPL driver only supports reading from the NAND using DMA - transfers. + help + Enable support for NAND. This option enables the standard and + SPL drivers. + The SPL driver only supports reading from the NAND using DMA + transfers. if NAND_SUNXI @@ -586,16 +586,16 @@ config NAND_OCTEONTX select SYS_NAND_SELF_INIT imply CMD_NAND help - This enables Nand flash controller hardware found on the OcteonTX - processors. + This enables Nand flash controller hardware found on the OcteonTX + processors. config NAND_OCTEONTX_HW_ECC bool "Support Hardware ECC for OcteonTX NAND controller" depends on NAND_OCTEONTX default y help - This enables Hardware BCH engine found on the OcteonTX processors to - support ECC for NAND flash controller. + This enables Hardware BCH engine found on the OcteonTX processors to + support ECC for NAND flash controller. config NAND_STM32_FMC2 bool "Support for NAND controller on STM32MP SoCs" @@ -760,37 +760,37 @@ config SYS_NAND_BAD_BLOCK_POS config SYS_NAND_U_BOOT_LOCATIONS bool "Define U-Boot binaries locations in NAND" help - Enable CONFIG_SYS_NAND_U_BOOT_OFFS though Kconfig. - This option should not be enabled when compiling U-Boot for boards - defining CONFIG_SYS_NAND_U_BOOT_OFFS in their include/configs/.h - file. + Enable CONFIG_SYS_NAND_U_BOOT_OFFS though Kconfig. + This option should not be enabled when compiling U-Boot for boards + defining CONFIG_SYS_NAND_U_BOOT_OFFS in their include/configs/.h + file. config SYS_NAND_U_BOOT_OFFS hex "Location in NAND to read U-Boot from" default 0x800000 if NAND_SUNXI depends on SYS_NAND_U_BOOT_LOCATIONS help - Set the offset from the start of the nand where u-boot should be - loaded from. + Set the offset from the start of the nand where u-boot should be + loaded from. config SYS_NAND_U_BOOT_OFFS_REDUND hex "Location in NAND to read U-Boot from" default SYS_NAND_U_BOOT_OFFS depends on SYS_NAND_U_BOOT_LOCATIONS help - Set the offset from the start of the nand where the redundant u-boot - should be loaded from. + Set the offset from the start of the nand where the redundant u-boot + should be loaded from. config SPL_NAND_AM33XX_BCH bool "Enables SPL-NAND driver which supports ELM based" depends on SPL_NAND_SUPPORT && NAND_OMAP_GPMC && !OMAP34XX default y - help + help Hardware ECC correction. This is useful for platforms which have ELM hardware engine and use NAND boot mode. Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine, so those platforms should use CONFIG_SPL_NAND_SIMPLE for enabling - SPL-NAND driver with software ECC correction support. + SPL-NAND driver with software ECC correction support. config SPL_NAND_DENALI bool "Support Denali NAND controller for SPL" @@ -819,6 +819,6 @@ config SYS_NAND_HW_ECC_OOBFIRST bool "In SPL, read the OOB first and then the data from NAND" depends on SPL_NAND_SIMPLE -endif +endif # if SPL -endif # if NAND +endif # if MTD_RAW_NAND