From: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Date: Tue, 18 Jun 2019 01:37:18 +0000 (+1000)
Subject: phy: Include NC-SI in phy setup
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e2ffeaa16250ec6372412c0f268449803c321db6;p=u-boot.git

phy: Include NC-SI in phy setup

Add NC-SI to the usual phy handling. This makes two notable changes:
- Somewhat similar to a fixed phy, phy_connect() will create an NC-SI
phy if CONFIG_PHY_NCSI is defined.
- An early return is added to phy_read() and phy_write() to handle a
case like the NC-SI phy which does not define a bus.

Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
---

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 80a7664e49..359cc49235 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -545,6 +545,9 @@ int phy_init(void)
 #ifdef CONFIG_PHY_FIXED
 	phy_fixed_init();
 #endif
+#ifdef CONFIG_PHY_NCSI
+	phy_ncsi_init();
+#endif
 #ifdef CONFIG_PHY_XILINX_GMII2RGMII
 	phy_xilinx_gmii2rgmii_init();
 #endif
@@ -1002,6 +1005,12 @@ struct phy_device *phy_connect(struct mii_dev *bus, int addr,
 #ifdef CONFIG_PHY_FIXED
 	phydev = phy_connect_fixed(bus, dev, interface);
 #endif
+
+#ifdef CONFIG_PHY_NCSI
+	if (!phydev)
+		phydev = phy_device_create(bus, 0, PHY_NCSI_ID, false, interface);
+#endif
+
 #ifdef CONFIG_PHY_XILINX_GMII2RGMII
 	if (!phydev)
 		phydev = phy_connect_gmii2rgmii(bus, dev, interface);
diff --git a/include/phy.h b/include/phy.h
index 400ca25a35..edc702a1f7 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -15,6 +15,7 @@
 #include <linux/mii.h>
 #include <linux/ethtool.h>
 #include <linux/mdio.h>
+#include <log.h>
 #include <phy_interface.h>
 
 #define PHY_FIXED_ID		0xa5a55a5a
@@ -173,6 +174,11 @@ static inline int phy_read(struct phy_device *phydev, int devad, int regnum)
 {
 	struct mii_dev *bus = phydev->bus;
 
+	if (!bus || !bus->read) {
+		debug("%s: No bus configured\n", __func__);
+		return -1;
+	}
+
 	return bus->read(bus, phydev->addr, devad, regnum);
 }
 
@@ -181,6 +187,11 @@ static inline int phy_write(struct phy_device *phydev, int devad, int regnum,
 {
 	struct mii_dev *bus = phydev->bus;
 
+	if (!bus || !bus->read) {
+		debug("%s: No bus configured\n", __func__);
+		return -1;
+	}
+
 	return bus->write(bus, phydev->addr, devad, regnum, val);
 }
 
@@ -402,6 +413,7 @@ int phy_vitesse_init(void);
 int phy_xilinx_init(void);
 int phy_mscc_init(void);
 int phy_fixed_init(void);
+int phy_ncsi_init(void);
 int phy_xilinx_gmii2rgmii_init(void);
 
 int board_phy_config(struct phy_device *phydev);
diff --git a/include/phy_interface.h b/include/phy_interface.h
index 73f3a3679c..31ca72a81f 100644
--- a/include/phy_interface.h
+++ b/include/phy_interface.h
@@ -31,6 +31,7 @@ typedef enum {
 	PHY_INTERFACE_MODE_XLAUI,
 	PHY_INTERFACE_MODE_CAUI2,
 	PHY_INTERFACE_MODE_CAUI4,
+	PHY_INTERFACE_MODE_NCSI,
 	PHY_INTERFACE_MODE_XFI,
 	PHY_INTERFACE_MODE_USXGMII,
 	PHY_INTERFACE_MODE_NONE,	/* Must be last */
@@ -60,6 +61,7 @@ static const char * const phy_interface_strings[] = {
 	[PHY_INTERFACE_MODE_XLAUI]		= "xlaui4",
 	[PHY_INTERFACE_MODE_CAUI2]		= "caui2",
 	[PHY_INTERFACE_MODE_CAUI4]		= "caui4",
+	[PHY_INTERFACE_MODE_NCSI]		= "NC-SI",
 	[PHY_INTERFACE_MODE_XFI]		= "xfi",
 	[PHY_INTERFACE_MODE_USXGMII]		= "usxgmii",
 	[PHY_INTERFACE_MODE_NONE]		= "",