From: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Date: Fri, 5 Jun 2020 10:06:37 +0000 (+0200)
Subject: arm64: dts: rk3399-puma: fix gpio levels for vcc5v0-host regulator
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e2dd607bced83b0fe04e18a5295239fbc1ba2969;p=u-boot.git

arm64: dts: rk3399-puma: fix gpio levels for vcc5v0-host regulator

The regulator enable-gpio uses opposite values for the declaration
vs. the enable_active_low property, breaking the regulator enablement.

Make the usbhost-supply work again by bringing them in sync again.

This mimics the upstream Linux change found on:
http://lore.kernel.org/r/20200604091239.424318-1-heiko@sntech.de

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
---

diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 531520e771..72c06abd27 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -101,7 +101,7 @@
 
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
-		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
 		enable-active-low;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en>;