From: Anton Vorontsov Date: Thu, 19 Feb 2009 15:20:42 +0000 (+0300) Subject: mpc83xx: PCIe: Don't start bus enumeration at 0 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e2d72ba543c7b6924b5b5d393dcd80b2b9c3a022;p=u-boot.git mpc83xx: PCIe: Don't start bus enumeration at 0 Currently we assign first_busno = 0 for the first PCIe hose, but this scheme won't work if we have ordinary PCI hose already registered (its first_busno value is 0 too). The old code worked fine only because we have PCI disabled on MPC837XEMDS boards in stand-alone mode (see commit 00f7bbae92e3b13f2b3 "mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards"). But on MPC837XERDB boards we have PCI and PCIe, so the bug actually triggers. So, to fix the issue, we should use pci_last_busno() + 1 for the first_busno (i.e. last available busno). Reported-by: Huang Changming Signed-off-by: Anton Vorontsov Signed-off-by: Kim Phillips --- diff --git a/cpu/mpc83xx/pcie.c b/cpu/mpc83xx/pcie.c index 12b5f69ced..1a3b2be942 100644 --- a/cpu/mpc83xx/pcie.c +++ b/cpu/mpc83xx/pcie.c @@ -86,7 +86,6 @@ static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg, { extern void disable_addr_trans(void); /* start.S */ static struct pci_controller pcie_hose[PCIE_MAX_BUSES]; - static int max_bus; struct pci_controller *hose = &pcie_hose[bus]; int i; @@ -117,7 +116,7 @@ static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg, hose->regions[i].size = 0x100000; hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY; - hose->first_busno = max_bus; + hose->first_busno = pci_last_busno() + 1; hose->last_busno = 0xff; if (bus == 0) @@ -145,7 +144,6 @@ static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg, * Hose scan. */ hose->last_busno = pci_hose_scan(hose); - max_bus = hose->last_busno + 1; } #else