From: Shaohui Xie Date: Mon, 25 Mar 2013 07:40:21 +0000 (+0000) Subject: powerpc/p5040: fix mdio mux for 10G port X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e14cdc0a695d4cdb40843e1e7c6ee29c471a3fcc;p=u-boot.git powerpc/p5040: fix mdio mux for 10G port Current driver of p5040 assumes 10G port follows 1G port DTSEC5 in eth port enum structure, it will assign mdio mux depend on this assumption. This is not true with Fman V3, which added more 1G ports after port DTSEC5 in eth port enum structure, then 10G ports on p5040 will have wrong mdio mux. So we use dynamic index for 10G ports instead of hardcoded enum value when doing mdio mux for 10G ports. Signed-off-by: Shaohui Xie Signed-off-by: Andy Fleming --- diff --git a/board/freescale/corenet_ds/eth_superhydra.c b/board/freescale/corenet_ds/eth_superhydra.c index ef9de25bd8..ae07073532 100644 --- a/board/freescale/corenet_ds/eth_superhydra.c +++ b/board/freescale/corenet_ds/eth_superhydra.c @@ -605,8 +605,8 @@ int board_eth_init(bd_t *bis) lane = serdes_get_first_lane(XAUI_FM1); if (lane >= 0) { debug("FM1@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]); - mdio_mux[FM1_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK; - mdio_mux[FM1_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT2; + mdio_mux[i].mask = BRDCFG1_EMI2_SEL_MASK; + mdio_mux[i].val = BRDCFG1_EMI2_SEL_SLOT2; super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_TGEC_MDIO", mdio_mux[i].mask, mdio_mux[i].val); } @@ -704,8 +704,8 @@ int board_eth_init(bd_t *bis) lane = serdes_get_first_lane(XAUI_FM2); if (lane >= 0) { debug("FM2@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]); - mdio_mux[FM2_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK; - mdio_mux[FM2_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT1; + mdio_mux[i].mask = BRDCFG1_EMI2_SEL_MASK; + mdio_mux[i].val = BRDCFG1_EMI2_SEL_SLOT1; super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_TGEC_MDIO", mdio_mux[i].mask, mdio_mux[i].val); }