From: Aaron Williams Date: Wed, 2 Sep 2020 06:29:06 +0000 (+0200) Subject: ram: octeon: Add MIPS Octeon3 DDR4 support (part 1/3) X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e13bb86588b19dde84b4b04d38076b374592a2f8;p=u-boot.git ram: octeon: Add MIPS Octeon3 DDR4 support (part 1/3) This Octeon 3 DDR driver is ported from the 2013 Cavium / Marvell U-Boot repository. It currently supports DDR4 on Octeon 3. It can be later extended to support also DDR3 and Octeon 2 platforms. Part 1 adds the base U-Boot RAM driver, which will be instantiated by the DT based probing. Signed-off-by: Aaron Williams Signed-off-by: Stefan Roese --- diff --git a/drivers/ram/octeon/octeon_ddr.c b/drivers/ram/octeon/octeon_ddr.c new file mode 100644 index 0000000000..757436b9d3 --- /dev/null +++ b/drivers/ram/octeon/octeon_ddr.c @@ -0,0 +1,2728 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Marvell International Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#define CONFIG_REF_HERTZ 50000000 + +DECLARE_GLOBAL_DATA_PTR; + +/* Sign of an integer */ +static s64 _sign(s64 v) +{ + return (v < 0); +} + +#ifndef DDR_NO_DEBUG +char *lookup_env(struct ddr_priv *priv, const char *format, ...) +{ + char *s; + unsigned long value; + va_list args; + char buffer[64]; + + va_start(args, format); + vsnprintf(buffer, sizeof(buffer), format, args); + va_end(args); + + s = ddr_getenv_debug(priv, buffer); + if (s) { + value = simple_strtoul(s, NULL, 0); + printf("Parameter found in environment %s=\"%s\" 0x%lx (%ld)\n", + buffer, s, value, value); + } + + return s; +} + +char *lookup_env_ull(struct ddr_priv *priv, const char *format, ...) +{ + char *s; + u64 value; + va_list args; + char buffer[64]; + + va_start(args, format); + vsnprintf(buffer, sizeof(buffer), format, args); + va_end(args); + + s = ddr_getenv_debug(priv, buffer); + if (s) { + value = simple_strtoull(s, NULL, 0); + printf("Parameter found in environment. %s = 0x%016llx\n", + buffer, value); + } + + return s; +} +#else +char *lookup_env(struct ddr_priv *priv, const char *format, ...) +{ + return NULL; +} + +char *lookup_env_ull(struct ddr_priv *priv, const char *format, ...) +{ + return NULL; +} +#endif + +/* Number of L2C Tag-and-data sections (TADs) that are connected to LMC. */ +#define CVMX_L2C_TADS ((OCTEON_IS_MODEL(OCTEON_CN68XX) || \ + OCTEON_IS_MODEL(OCTEON_CN73XX) || \ + OCTEON_IS_MODEL(OCTEON_CNF75XX)) ? 4 : \ + (OCTEON_IS_MODEL(OCTEON_CN78XX)) ? 8 : 1) + +/* Number of L2C IOBs connected to LMC. */ +#define CVMX_L2C_IOBS ((OCTEON_IS_MODEL(OCTEON_CN68XX) || \ + OCTEON_IS_MODEL(OCTEON_CN78XX) || \ + OCTEON_IS_MODEL(OCTEON_CN73XX) || \ + OCTEON_IS_MODEL(OCTEON_CNF75XX)) ? 2 : 1) + +#define CVMX_L2C_MAX_MEMSZ_ALLOWED (OCTEON_IS_OCTEON2() ? \ + (32 * CVMX_L2C_TADS) : \ + (OCTEON_IS_MODEL(OCTEON_CN70XX) ? \ + 512 : (OCTEON_IS_OCTEON3() ? 1024 : 0))) + +/** + * Initialize the BIG address in L2C+DRAM to generate proper error + * on reading/writing to an non-existent memory location. + * + * @param node OCX CPU node number + * @param mem_size Amount of DRAM configured in MB. + * @param mode Allow/Disallow reporting errors L2C_INT_SUM[BIGRD,BIGWR]. + */ +static void cvmx_l2c_set_big_size(struct ddr_priv *priv, u64 mem_size, int mode) +{ + if ((OCTEON_IS_OCTEON2() || OCTEON_IS_OCTEON3()) && + !OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X)) { + union cvmx_l2c_big_ctl big_ctl; + int bits = 0, zero_bits = 0; + u64 mem; + + if (mem_size > (CVMX_L2C_MAX_MEMSZ_ALLOWED * 1024ull)) { + printf("WARNING: Invalid memory size(%lld) requested, should be <= %lld\n", + mem_size, + (u64)CVMX_L2C_MAX_MEMSZ_ALLOWED * 1024); + mem_size = CVMX_L2C_MAX_MEMSZ_ALLOWED * 1024; + } + + mem = mem_size; + while (mem) { + if ((mem & 1) == 0) + zero_bits++; + bits++; + mem >>= 1; + } + + if ((bits - zero_bits) != 1 || (bits - 9) <= 0) { + printf("ERROR: Invalid DRAM size (%lld) requested, refer to L2C_BIG_CTL[maxdram] for valid options.\n", + mem_size); + return; + } + + /* + * The BIG/HOLE is logic is not supported in pass1 as per + * Errata L2C-17736 + */ + if (mode == 0 && OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) + mode = 1; + + big_ctl.u64 = 0; + big_ctl.s.maxdram = bits - 9; + big_ctl.cn61xx.disable = mode; + l2c_wr(priv, CVMX_L2C_BIG_CTL, big_ctl.u64); + } +} + +static u32 octeon3_refclock(u32 alt_refclk, u32 ddr_hertz, + struct dimm_config *dimm_config) +{ + u32 ddr_ref_hertz = CONFIG_REF_HERTZ; + int ddr_type; + int spd_dimm_type; + + debug("%s(%u, %u, %p)\n", __func__, alt_refclk, ddr_hertz, dimm_config); + + /* Octeon 3 case... */ + + /* we know whether alternate refclk is always wanted + * we also know already if we want 2133 MT/s + * if alt refclk not always wanted, then probe DDR and + * DIMM type if DDR4 and RDIMMs, then set desired refclk + * to 100MHz, otherwise to default (50MHz) + * depend on ddr_initialize() to do the refclk selection + * and validation/ + */ + if (alt_refclk) { + /* + * If alternate refclk was specified, let it override + * everything + */ + ddr_ref_hertz = alt_refclk * 1000000; + printf("%s: DRAM init: %d MHz refclk is REQUESTED ALWAYS\n", + __func__, alt_refclk); + } else if (ddr_hertz > 1000000000) { + ddr_type = get_ddr_type(dimm_config, 0); + spd_dimm_type = get_dimm_module_type(dimm_config, 0, ddr_type); + + debug("ddr type: 0x%x, dimm type: 0x%x\n", ddr_type, + spd_dimm_type); + /* Is DDR4 and RDIMM just to be sure. */ + if (ddr_type == DDR4_DRAM && + (spd_dimm_type == 1 || spd_dimm_type == 5 || + spd_dimm_type == 8)) { + /* Yes, we require 100MHz refclk, so set it. */ + ddr_ref_hertz = 100000000; + puts("DRAM init: 100 MHz refclk is REQUIRED\n"); + } + } + + debug("%s: speed: %u\n", __func__, ddr_ref_hertz); + return ddr_ref_hertz; +} + +int encode_row_lsb_ddr3(int row_lsb) +{ + int row_lsb_start = 14; + + /* Decoding for row_lsb */ + /* 000: row_lsb = mem_adr[14] */ + /* 001: row_lsb = mem_adr[15] */ + /* 010: row_lsb = mem_adr[16] */ + /* 011: row_lsb = mem_adr[17] */ + /* 100: row_lsb = mem_adr[18] */ + /* 101: row_lsb = mem_adr[19] */ + /* 110: row_lsb = mem_adr[20] */ + /* 111: RESERVED */ + + if (octeon_is_cpuid(OCTEON_CN6XXX) || + octeon_is_cpuid(OCTEON_CNF7XXX) || octeon_is_cpuid(OCTEON_CN7XXX)) + row_lsb_start = 14; + else + printf("ERROR: Unsupported Octeon model: 0x%x\n", + read_c0_prid()); + + return row_lsb - row_lsb_start; +} + +int encode_pbank_lsb_ddr3(int pbank_lsb) +{ + /* Decoding for pbank_lsb */ + /* 0000:DIMM = mem_adr[28] / rank = mem_adr[27] (if RANK_ENA) */ + /* 0001:DIMM = mem_adr[29] / rank = mem_adr[28] " */ + /* 0010:DIMM = mem_adr[30] / rank = mem_adr[29] " */ + /* 0011:DIMM = mem_adr[31] / rank = mem_adr[30] " */ + /* 0100:DIMM = mem_adr[32] / rank = mem_adr[31] " */ + /* 0101:DIMM = mem_adr[33] / rank = mem_adr[32] " */ + /* 0110:DIMM = mem_adr[34] / rank = mem_adr[33] " */ + /* 0111:DIMM = 0 / rank = mem_adr[34] " */ + /* 1000-1111: RESERVED */ + + int pbank_lsb_start = 0; + + if (octeon_is_cpuid(OCTEON_CN6XXX) || + octeon_is_cpuid(OCTEON_CNF7XXX) || octeon_is_cpuid(OCTEON_CN7XXX)) + pbank_lsb_start = 28; + else + printf("ERROR: Unsupported Octeon model: 0x%x\n", + read_c0_prid()); + + return pbank_lsb - pbank_lsb_start; +} + +static void set_ddr_clock_initialized(struct ddr_priv *priv, int if_num, + bool inited_flag) +{ + priv->ddr_clock_initialized[if_num] = inited_flag; +} + +static int ddr_clock_initialized(struct ddr_priv *priv, int if_num) +{ + return priv->ddr_clock_initialized[if_num]; +} + +static void set_ddr_memory_preserved(struct ddr_priv *priv) +{ + priv->ddr_memory_preserved = true; +} + +bool ddr_memory_preserved(struct ddr_priv *priv) +{ + return priv->ddr_memory_preserved; +} + +static void cn78xx_lmc_dreset_init(struct ddr_priv *priv, int if_num) +{ + union cvmx_lmcx_dll_ctl2 dll_ctl2; + + /* + * The remainder of this section describes the sequence for LMCn. + * + * 1. If not done already, write LMC(0..3)_DLL_CTL2 to its reset value + * (except without changing the LMC(0..3)_DLL_CTL2[INTF_EN] value from + * that set in the prior Step 3), including + * LMC(0..3)_DLL_CTL2[DRESET] = 1. + * + * 2. Without changing any other LMC(0..3)_DLL_CTL2 fields, write + * LMC(0..3)_DLL_CTL2[DLL_BRINGUP] = 1. + */ + + dll_ctl2.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL2(if_num)); + dll_ctl2.cn78xx.dll_bringup = 1; + lmc_wr(priv, CVMX_LMCX_DLL_CTL2(if_num), dll_ctl2.u64); + + /* + * 3. Read LMC(0..3)_DLL_CTL2 and wait for the result. + */ + + lmc_rd(priv, CVMX_LMCX_DLL_CTL2(if_num)); + + /* + * 4. Wait for a minimum of 10 LMC CK cycles. + */ + + udelay(1); + + /* + * 5. Without changing any other fields in LMC(0..3)_DLL_CTL2, write + * LMC(0..3)_DLL_CTL2[QUAD_DLL_ENA] = 1. + * LMC(0..3)_DLL_CTL2[QUAD_DLL_ENA] must not change after this point + * without restarting the LMCn DRESET initialization sequence. + */ + + dll_ctl2.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL2(if_num)); + dll_ctl2.cn78xx.quad_dll_ena = 1; + lmc_wr(priv, CVMX_LMCX_DLL_CTL2(if_num), dll_ctl2.u64); + + /* + * 6. Read LMC(0..3)_DLL_CTL2 and wait for the result. + */ + + lmc_rd(priv, CVMX_LMCX_DLL_CTL2(if_num)); + + /* + * 7. Wait a minimum of 10 us. + */ + + udelay(10); + + /* + * 8. Without changing any other fields in LMC(0..3)_DLL_CTL2, write + * LMC(0..3)_DLL_CTL2[DLL_BRINGUP] = 0. + * LMC(0..3)_DLL_CTL2[DLL_BRINGUP] must not change after this point + * without restarting the LMCn DRESET initialization sequence. + */ + + dll_ctl2.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL2(if_num)); + dll_ctl2.cn78xx.dll_bringup = 0; + lmc_wr(priv, CVMX_LMCX_DLL_CTL2(if_num), dll_ctl2.u64); + + /* + * 9. Read LMC(0..3)_DLL_CTL2 and wait for the result. + */ + + lmc_rd(priv, CVMX_LMCX_DLL_CTL2(if_num)); + + /* + * 10. Without changing any other fields in LMC(0..3)_DLL_CTL2, write + * LMC(0..3)_DLL_CTL2[DRESET] = 0. + * LMC(0..3)_DLL_CTL2[DRESET] must not change after this point without + * restarting the LMCn DRESET initialization sequence. + * + * After completing LMCn DRESET initialization, all LMC CSRs may be + * accessed. Prior to completing LMC DRESET initialization, only + * LMC(0..3)_DDR_PLL_CTL, LMC(0..3)_DLL_CTL2, LMC(0..3)_RESET_CTL, and + * LMC(0..3)_COMP_CTL2 LMC CSRs can be accessed. + */ + + dll_ctl2.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL2(if_num)); + dll_ctl2.cn78xx.dreset = 0; + lmc_wr(priv, CVMX_LMCX_DLL_CTL2(if_num), dll_ctl2.u64); +} + +int initialize_ddr_clock(struct ddr_priv *priv, struct ddr_conf *ddr_conf, + u32 cpu_hertz, u32 ddr_hertz, u32 ddr_ref_hertz, + int if_num, u32 if_mask) +{ + char *s; + + if (ddr_clock_initialized(priv, if_num)) + return 0; + + if (!ddr_clock_initialized(priv, 0)) { /* Do this once */ + union cvmx_lmcx_reset_ctl reset_ctl; + int i; + + /* + * Check to see if memory is to be preserved and set global + * flag + */ + for (i = 3; i >= 0; --i) { + if ((if_mask & (1 << i)) == 0) + continue; + + reset_ctl.u64 = lmc_rd(priv, CVMX_LMCX_RESET_CTL(i)); + if (reset_ctl.s.ddr3psv == 1) { + debug("LMC%d Preserving memory\n", i); + set_ddr_memory_preserved(priv); + + /* Re-initialize flags */ + reset_ctl.s.ddr3pwarm = 0; + reset_ctl.s.ddr3psoft = 0; + reset_ctl.s.ddr3psv = 0; + lmc_wr(priv, CVMX_LMCX_RESET_CTL(i), + reset_ctl.u64); + } + } + } + + /* + * ToDo: Add support for these SoCs: + * + * if (octeon_is_cpuid(OCTEON_CN63XX) || + * octeon_is_cpuid(OCTEON_CN66XX) || + * octeon_is_cpuid(OCTEON_CN61XX) || octeon_is_cpuid(OCTEON_CNF71XX)) + * + * and + * + * if (octeon_is_cpuid(OCTEON_CN68XX)) + * + * and + * + * if (octeon_is_cpuid(OCTEON_CN70XX)) + * + */ + + if (octeon_is_cpuid(OCTEON_CN78XX) || octeon_is_cpuid(OCTEON_CN73XX) || + octeon_is_cpuid(OCTEON_CNF75XX)) { + union cvmx_lmcx_dll_ctl2 dll_ctl2; + union cvmx_lmcx_dll_ctl3 ddr_dll_ctl3; + union cvmx_lmcx_ddr_pll_ctl ddr_pll_ctl; + struct dimm_config *dimm_config_table = + ddr_conf->dimm_config_table; + int en_idx, save_en_idx, best_en_idx = 0; + u64 clkf, clkr, max_clkf = 127; + u64 best_clkf = 0, best_clkr = 0; + u64 best_pll_MHz = 0; + u64 pll_MHz; + u64 min_pll_MHz = 800; + u64 max_pll_MHz = 5000; + u64 error; + u64 best_error; + u64 best_calculated_ddr_hertz = 0; + u64 calculated_ddr_hertz = 0; + u64 orig_ddr_hertz = ddr_hertz; + const int _en[] = { 1, 2, 3, 4, 5, 6, 7, 8, 10, 12 }; + int override_pll_settings; + int new_bwadj; + int ddr_type; + int i; + + /* ddr_type only indicates DDR4 or DDR3 */ + ddr_type = (read_spd(&dimm_config_table[0], 0, + DDR4_SPD_KEY_BYTE_DEVICE_TYPE) == + 0x0C) ? DDR4_DRAM : DDR3_DRAM; + + /* + * 5.9 LMC Initialization Sequence + * + * There are 13 parts to the LMC initialization procedure: + * + * 1. DDR PLL initialization + * + * 2. LMC CK initialization + * + * 3. LMC interface enable initialization + * + * 4. LMC DRESET initialization + * + * 5. LMC CK local initialization + * + * 6. LMC RESET initialization + * + * 7. Early LMC initialization + * + * 8. LMC offset training + * + * 9. LMC internal Vref training + * + * 10. LMC deskew training + * + * 11. LMC write leveling + * + * 12. LMC read leveling + * + * 13. Final LMC initialization + * + * CN78XX supports two modes: + * + * - two-LMC mode: both LMCs 2/3 must not be enabled + * (LMC2/3_DLL_CTL2[DRESET] must be set to 1 and + * LMC2/3_DLL_CTL2[INTF_EN] + * must be set to 0) and both LMCs 0/1 must be enabled). + * + * - four-LMC mode: all four LMCs 0..3 must be enabled. + * + * Steps 4 and 6..13 should each be performed for each + * enabled LMC (either twice or four times). Steps 1..3 and + * 5 are more global in nature and each must be executed + * exactly once (not once per LMC) each time the DDR PLL + * changes or is first brought up. Steps 1..3 and 5 need + * not be performed if the DDR PLL is stable. + * + * Generally, the steps are performed in order. The exception + * is that the CK local initialization (step 5) must be + * performed after some DRESET initializations (step 4) and + * before other DRESET initializations when the DDR PLL is + * brought up or changed. (The CK local initialization uses + * information from some LMCs to bring up the other local + * CKs.) The following text describes these ordering + * requirements in more detail. + * + * Following any chip reset, the DDR PLL must be brought up, + * and all 13 steps should be executed. Subsequently, it is + * possible to execute only steps 4 and 6..13, or to execute + * only steps 8..13. + * + * The remainder of this section covers these initialization + * steps in sequence. + */ + + /* Do the following init only once */ + if (if_num != 0) + goto not_if0; + + /* Only for interface #0 ... */ + + /* + * 5.9.3 LMC Interface-Enable Initialization + * + * LMC interface-enable initialization (Step 3) must be# + * performed after Step 2 for each chip reset and whenever + * the DDR clock speed changes. This step needs to be + * performed only once, not once per LMC. Perform the + * following three substeps for the LMC interface-enable + * initialization: + * + * 1. Without changing any other LMC2_DLL_CTL2 fields + * (LMC(0..3)_DLL_CTL2 should be at their reset values after + * Step 1), write LMC2_DLL_CTL2[INTF_EN] = 1 if four-LMC + * mode is desired. + * + * 2. Without changing any other LMC3_DLL_CTL2 fields, write + * LMC3_DLL_CTL2[INTF_EN] = 1 if four-LMC mode is desired. + * + * 3. Read LMC2_DLL_CTL2 and wait for the result. + * + * The LMC2_DLL_CTL2[INTF_EN] and LMC3_DLL_CTL2[INTF_EN] + * values should not be changed by software from this point. + */ + + for (i = 0; i < 4; ++i) { + if ((if_mask & (1 << i)) == 0) + continue; + + dll_ctl2.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL2(i)); + + dll_ctl2.cn78xx.byp_setting = 0; + dll_ctl2.cn78xx.byp_sel = 0; + dll_ctl2.cn78xx.quad_dll_ena = 0; + dll_ctl2.cn78xx.dreset = 1; + dll_ctl2.cn78xx.dll_bringup = 0; + dll_ctl2.cn78xx.intf_en = 0; + + lmc_wr(priv, CVMX_LMCX_DLL_CTL2(i), dll_ctl2.u64); + } + + /* + * ###### Interface enable (intf_en) deferred until after + * DDR_DIV_RESET=0 ####### + */ + + /* + * 5.9.1 DDR PLL Initialization + * + * DDR PLL initialization (Step 1) must be performed for each + * chip reset and whenever the DDR clock speed changes. This + * step needs to be performed only once, not once per LMC. + * + * Perform the following eight substeps to initialize the + * DDR PLL: + * + * 1. If not done already, write all fields in + * LMC(0..3)_DDR_PLL_CTL and + * LMC(0..1)_DLL_CTL2 to their reset values, including: + * + * .. LMC0_DDR_PLL_CTL[DDR_DIV_RESET] = 1 + * .. LMC0_DLL_CTL2[DRESET] = 1 + * + * This substep is not necessary after a chip reset. + * + */ + + ddr_pll_ctl.u64 = lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(0)); + + ddr_pll_ctl.cn78xx.reset_n = 0; + ddr_pll_ctl.cn78xx.ddr_div_reset = 1; + ddr_pll_ctl.cn78xx.phy_dcok = 0; + + /* + * 73XX pass 1.3 has LMC0 DCLK_INVERT tied to 1; earlier + * 73xx passes are tied to 0 + * + * 75XX needs LMC0 DCLK_INVERT set to 1 to minimize duty + * cycle falling points + * + * and we default all other chips LMC0 to DCLK_INVERT=0 + */ + ddr_pll_ctl.cn78xx.dclk_invert = + !!(octeon_is_cpuid(OCTEON_CN73XX_PASS1_3) || + octeon_is_cpuid(OCTEON_CNF75XX)); + + /* + * allow override of LMC0 desired setting for DCLK_INVERT, + * but not on 73XX; + * we cannot change LMC0 DCLK_INVERT on 73XX any pass + */ + if (!(octeon_is_cpuid(OCTEON_CN73XX))) { + s = lookup_env(priv, "ddr0_set_dclk_invert"); + if (s) { + ddr_pll_ctl.cn78xx.dclk_invert = + !!simple_strtoul(s, NULL, 0); + debug("LMC0: override DDR_PLL_CTL[dclk_invert] to %d\n", + ddr_pll_ctl.cn78xx.dclk_invert); + } + } + + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(0), ddr_pll_ctl.u64); + debug("%-45s : 0x%016llx\n", "LMC0: DDR_PLL_CTL", + ddr_pll_ctl.u64); + + // only when LMC1 is active + if (if_mask & 0x2) { + /* + * For CNF75XX, both LMC0 and LMC1 use the same PLL, + * so we use the LMC0 setting of DCLK_INVERT for LMC1. + */ + if (!octeon_is_cpuid(OCTEON_CNF75XX)) { + int override = 0; + + /* + * by default, for non-CNF75XX, we want + * LMC1 toggled LMC0 + */ + int lmc0_dclk_invert = + ddr_pll_ctl.cn78xx.dclk_invert; + + /* + * FIXME: work-around for DDR3 UDIMM problems + * is to use LMC0 setting on LMC1 and if + * 73xx pass 1.3, we want to default LMC1 + * DCLK_INVERT to LMC0, not the invert of LMC0 + */ + int lmc1_dclk_invert; + + lmc1_dclk_invert = + ((ddr_type == DDR4_DRAM) && + !octeon_is_cpuid(OCTEON_CN73XX_PASS1_3)) + ? lmc0_dclk_invert ^ 1 : + lmc0_dclk_invert; + + /* + * allow override of LMC1 desired setting for + * DCLK_INVERT + */ + s = lookup_env(priv, "ddr1_set_dclk_invert"); + if (s) { + lmc1_dclk_invert = + !!simple_strtoul(s, NULL, 0); + override = 1; + } + debug("LMC1: %s DDR_PLL_CTL[dclk_invert] to %d (LMC0 %d)\n", + (override) ? "override" : + "default", lmc1_dclk_invert, + lmc0_dclk_invert); + + ddr_pll_ctl.cn78xx.dclk_invert = + lmc1_dclk_invert; + } + + // but always write LMC1 CSR if it is active + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(1), ddr_pll_ctl.u64); + debug("%-45s : 0x%016llx\n", + "LMC1: DDR_PLL_CTL", ddr_pll_ctl.u64); + } + + /* + * 2. If the current DRAM contents are not preserved (see + * LMC(0..3)_RESET_ CTL[DDR3PSV]), this is also an appropriate + * time to assert the RESET# pin of the DDR3/DDR4 DRAM parts. + * If desired, write + * LMC0_RESET_ CTL[DDR3RST] = 0 without modifying any other + * LMC0_RESET_CTL fields to assert the DDR_RESET_L pin. + * No action is required here to assert DDR_RESET_L + * following a chip reset. Refer to Section 5.9.6. Do this + * for all enabled LMCs. + */ + + for (i = 0; (!ddr_memory_preserved(priv)) && i < 4; ++i) { + union cvmx_lmcx_reset_ctl reset_ctl; + + if ((if_mask & (1 << i)) == 0) + continue; + + reset_ctl.u64 = lmc_rd(priv, CVMX_LMCX_RESET_CTL(i)); + reset_ctl.cn78xx.ddr3rst = 0; /* Reset asserted */ + debug("LMC%d Asserting DDR_RESET_L\n", i); + lmc_wr(priv, CVMX_LMCX_RESET_CTL(i), reset_ctl.u64); + lmc_rd(priv, CVMX_LMCX_RESET_CTL(i)); + } + + /* + * 3. Without changing any other LMC0_DDR_PLL_CTL values, + * write LMC0_DDR_PLL_CTL[CLKF] with a value that gives a + * desired DDR PLL speed. The LMC0_DDR_PLL_CTL[CLKF] value + * should be selected in conjunction with the post-scalar + * divider values for LMC (LMC0_DDR_PLL_CTL[DDR_PS_EN]) so + * that the desired LMC CK speeds are is produced (all + * enabled LMCs must run the same speed). Section 5.14 + * describes LMC0_DDR_PLL_CTL[CLKF] and + * LMC0_DDR_PLL_CTL[DDR_PS_EN] programmings that produce + * the desired LMC CK speed. Section 5.9.2 describes LMC CK + * initialization, which can be done separately from the DDR + * PLL initialization described in this section. + * + * The LMC0_DDR_PLL_CTL[CLKF] value must not change after + * this point without restarting this SDRAM PLL + * initialization sequence. + */ + + /* Init to max error */ + error = ddr_hertz; + best_error = ddr_hertz; + + debug("DDR Reference Hertz = %d\n", ddr_ref_hertz); + + while (best_error == ddr_hertz) { + for (clkr = 0; clkr < 4; ++clkr) { + for (en_idx = + sizeof(_en) / sizeof(int) - + 1; en_idx >= 0; --en_idx) { + save_en_idx = en_idx; + clkf = + ((ddr_hertz) * + (clkr + 1) * (_en[save_en_idx])); + clkf = divide_nint(clkf, ddr_ref_hertz) + - 1; + pll_MHz = + ddr_ref_hertz * + (clkf + 1) / (clkr + 1) / 1000000; + calculated_ddr_hertz = + ddr_ref_hertz * + (clkf + + 1) / ((clkr + + 1) * (_en[save_en_idx])); + error = + ddr_hertz - calculated_ddr_hertz; + + if (pll_MHz < min_pll_MHz || + pll_MHz > max_pll_MHz) + continue; + if (clkf > max_clkf) { + /* + * PLL requires clkf to be + * limited + */ + continue; + } + if (abs(error) > abs(best_error)) + continue; + + debug("clkr: %2llu, en[%d]: %2d, clkf: %4llu, pll_MHz: %4llu, ddr_hertz: %8llu, error: %8lld\n", + clkr, save_en_idx, + _en[save_en_idx], clkf, pll_MHz, + calculated_ddr_hertz, error); + + /* Favor the highest PLL frequency. */ + if (abs(error) < abs(best_error) || + pll_MHz > best_pll_MHz) { + best_pll_MHz = pll_MHz; + best_calculated_ddr_hertz = + calculated_ddr_hertz; + best_error = error; + best_clkr = clkr; + best_clkf = clkf; + best_en_idx = save_en_idx; + } + } + } + + override_pll_settings = 0; + + s = lookup_env(priv, "ddr_pll_clkr"); + if (s) { + best_clkr = simple_strtoul(s, NULL, 0); + override_pll_settings = 1; + } + + s = lookup_env(priv, "ddr_pll_clkf"); + if (s) { + best_clkf = simple_strtoul(s, NULL, 0); + override_pll_settings = 1; + } + + s = lookup_env(priv, "ddr_pll_en_idx"); + if (s) { + best_en_idx = simple_strtoul(s, NULL, 0); + override_pll_settings = 1; + } + + if (override_pll_settings) { + best_pll_MHz = + ddr_ref_hertz * (best_clkf + + 1) / + (best_clkr + 1) / 1000000; + best_calculated_ddr_hertz = + ddr_ref_hertz * (best_clkf + + 1) / + ((best_clkr + 1) * (_en[best_en_idx])); + best_error = + ddr_hertz - best_calculated_ddr_hertz; + } + + debug("clkr: %2llu, en[%d]: %2d, clkf: %4llu, pll_MHz: %4llu, ddr_hertz: %8llu, error: %8lld <==\n", + best_clkr, best_en_idx, _en[best_en_idx], + best_clkf, best_pll_MHz, + best_calculated_ddr_hertz, best_error); + + /* + * Try lowering the frequency if we can't get a + * working configuration + */ + if (best_error == ddr_hertz) { + if (ddr_hertz < orig_ddr_hertz - 10000000) + break; + ddr_hertz -= 1000000; + best_error = ddr_hertz; + } + } + + if (best_error == ddr_hertz) { + printf("ERROR: Can not compute a legal DDR clock speed configuration.\n"); + return -1; + } + + new_bwadj = (best_clkf + 1) / 10; + debug("bwadj: %2d\n", new_bwadj); + + s = lookup_env(priv, "ddr_pll_bwadj"); + if (s) { + new_bwadj = strtoul(s, NULL, 0); + debug("bwadj: %2d\n", new_bwadj); + } + + for (i = 0; i < 2; ++i) { + if ((if_mask & (1 << i)) == 0) + continue; + + ddr_pll_ctl.u64 = + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i)); + debug("LMC%d: DDR_PLL_CTL : 0x%016llx\n", + i, ddr_pll_ctl.u64); + + ddr_pll_ctl.cn78xx.ddr_ps_en = best_en_idx; + ddr_pll_ctl.cn78xx.clkf = best_clkf; + ddr_pll_ctl.cn78xx.clkr = best_clkr; + ddr_pll_ctl.cn78xx.reset_n = 0; + ddr_pll_ctl.cn78xx.bwadj = new_bwadj; + + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(i), ddr_pll_ctl.u64); + debug("LMC%d: DDR_PLL_CTL : 0x%016llx\n", + i, ddr_pll_ctl.u64); + + /* + * For cnf75xx LMC0 and LMC1 use the same PLL so + * only program LMC0 PLL. + */ + if (octeon_is_cpuid(OCTEON_CNF75XX)) + break; + } + + for (i = 0; i < 4; ++i) { + if ((if_mask & (1 << i)) == 0) + continue; + + /* + * 4. Read LMC0_DDR_PLL_CTL and wait for the result. + */ + + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i)); + + /* + * 5. Wait a minimum of 3 us. + */ + + udelay(3); /* Wait 3 us */ + + /* + * 6. Write LMC0_DDR_PLL_CTL[RESET_N] = 1 without + * changing any other LMC0_DDR_PLL_CTL values. + */ + + ddr_pll_ctl.u64 = + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i)); + ddr_pll_ctl.cn78xx.reset_n = 1; + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(i), ddr_pll_ctl.u64); + + /* + * 7. Read LMC0_DDR_PLL_CTL and wait for the result. + */ + + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i)); + + /* + * 8. Wait a minimum of 25 us. + */ + + udelay(25); /* Wait 25 us */ + + /* + * For cnf75xx LMC0 and LMC1 use the same PLL so + * only program LMC0 PLL. + */ + if (octeon_is_cpuid(OCTEON_CNF75XX)) + break; + } + + for (i = 0; i < 4; ++i) { + if ((if_mask & (1 << i)) == 0) + continue; + + /* + * 5.9.2 LMC CK Initialization + * + * DDR PLL initialization must be completed prior to + * starting LMC CK initialization. + * + * Perform the following substeps to initialize the + * LMC CK: + * + * 1. Without changing any other LMC(0..3)_DDR_PLL_CTL + * values, write + * LMC(0..3)_DDR_PLL_CTL[DDR_DIV_RESET] = 1 and + * LMC(0..3)_DDR_PLL_CTL[DDR_PS_EN] with the + * appropriate value to get the desired LMC CK speed. + * Section 5.14 discusses CLKF and DDR_PS_EN + * programmings. The LMC(0..3)_DDR_PLL_CTL[DDR_PS_EN] + * must not change after this point without restarting + * this LMC CK initialization sequence. + */ + + ddr_pll_ctl.u64 = lmc_rd(priv, + CVMX_LMCX_DDR_PLL_CTL(i)); + ddr_pll_ctl.cn78xx.ddr_div_reset = 1; + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(i), ddr_pll_ctl.u64); + + /* + * 2. Without changing any other fields in + * LMC(0..3)_DDR_PLL_CTL, write + * LMC(0..3)_DDR_PLL_CTL[DDR4_MODE] = 0. + */ + + ddr_pll_ctl.u64 = + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i)); + ddr_pll_ctl.cn78xx.ddr4_mode = + (ddr_type == DDR4_DRAM) ? 1 : 0; + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(i), ddr_pll_ctl.u64); + + /* + * 3. Read LMC(0..3)_DDR_PLL_CTL and wait for the + * result. + */ + + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i)); + + /* + * 4. Wait a minimum of 1 us. + */ + + udelay(1); /* Wait 1 us */ + + /* + * ###### Steps 5 through 7 deferred until after + * DDR_DIV_RESET=0 ####### + */ + + /* + * 8. Without changing any other LMC(0..3)_COMP_CTL2 + * values, write + * LMC(0..3)_COMP_CTL2[CK_CTL,CONTROL_CTL,CMD_CTL] + * to the desired DDR*_CK_*_P control and command + * signals drive strength. + */ + + union cvmx_lmcx_comp_ctl2 comp_ctl2; + const struct ddr3_custom_config *custom_lmc_config = + &ddr_conf->custom_lmc_config; + + comp_ctl2.u64 = lmc_rd(priv, CVMX_LMCX_COMP_CTL2(i)); + + /* Default 4=34.3 ohm */ + comp_ctl2.cn78xx.dqx_ctl = + (custom_lmc_config->dqx_ctl == + 0) ? 4 : custom_lmc_config->dqx_ctl; + /* Default 4=34.3 ohm */ + comp_ctl2.cn78xx.ck_ctl = + (custom_lmc_config->ck_ctl == + 0) ? 4 : custom_lmc_config->ck_ctl; + /* Default 4=34.3 ohm */ + comp_ctl2.cn78xx.cmd_ctl = + (custom_lmc_config->cmd_ctl == + 0) ? 4 : custom_lmc_config->cmd_ctl; + + comp_ctl2.cn78xx.rodt_ctl = 0x4; /* 60 ohm */ + + comp_ctl2.cn70xx.ptune_offset = + (abs(custom_lmc_config->ptune_offset) & 0x7) + | (_sign(custom_lmc_config->ptune_offset) << 3); + comp_ctl2.cn70xx.ntune_offset = + (abs(custom_lmc_config->ntune_offset) & 0x7) + | (_sign(custom_lmc_config->ntune_offset) << 3); + + s = lookup_env(priv, "ddr_clk_ctl"); + if (s) { + comp_ctl2.cn78xx.ck_ctl = + simple_strtoul(s, NULL, 0); + } + + s = lookup_env(priv, "ddr_ck_ctl"); + if (s) { + comp_ctl2.cn78xx.ck_ctl = + simple_strtoul(s, NULL, 0); + } + + s = lookup_env(priv, "ddr_cmd_ctl"); + if (s) { + comp_ctl2.cn78xx.cmd_ctl = + simple_strtoul(s, NULL, 0); + } + + s = lookup_env(priv, "ddr_dqx_ctl"); + if (s) { + comp_ctl2.cn78xx.dqx_ctl = + simple_strtoul(s, NULL, 0); + } + + s = lookup_env(priv, "ddr_ptune_offset"); + if (s) { + comp_ctl2.cn78xx.ptune_offset = + simple_strtoul(s, NULL, 0); + } + + s = lookup_env(priv, "ddr_ntune_offset"); + if (s) { + comp_ctl2.cn78xx.ntune_offset = + simple_strtoul(s, NULL, 0); + } + + lmc_wr(priv, CVMX_LMCX_COMP_CTL2(i), comp_ctl2.u64); + + /* + * 9. Read LMC(0..3)_DDR_PLL_CTL and wait for the + * result. + */ + + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i)); + + /* + * 10. Wait a minimum of 200 ns. + */ + + udelay(1); /* Wait 1 us */ + + /* + * 11. Without changing any other + * LMC(0..3)_DDR_PLL_CTL values, write + * LMC(0..3)_DDR_PLL_CTL[DDR_DIV_RESET] = 0. + */ + + ddr_pll_ctl.u64 = lmc_rd(priv, + CVMX_LMCX_DDR_PLL_CTL(i)); + ddr_pll_ctl.cn78xx.ddr_div_reset = 0; + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(i), ddr_pll_ctl.u64); + + /* + * 12. Read LMC(0..3)_DDR_PLL_CTL and wait for the + * result. + */ + + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i)); + + /* + * 13. Wait a minimum of 200 ns. + */ + + udelay(1); /* Wait 1 us */ + } + + /* + * Relocated Interface Enable (intf_en) Step + */ + for (i = (octeon_is_cpuid(OCTEON_CN73XX) || + octeon_is_cpuid(OCTEON_CNF75XX)) ? 1 : 2; + i < 4; ++i) { + /* + * This step is only necessary for LMC 2 and 3 in + * 4-LMC mode. The mask will cause the unpopulated + * interfaces to be skipped. + */ + if ((if_mask & (1 << i)) == 0) + continue; + + dll_ctl2.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL2(i)); + dll_ctl2.cn78xx.intf_en = 1; + lmc_wr(priv, CVMX_LMCX_DLL_CTL2(i), dll_ctl2.u64); + lmc_rd(priv, CVMX_LMCX_DLL_CTL2(i)); + } + + /* + * Relocated PHY_DCOK Step + */ + for (i = 0; i < 4; ++i) { + if ((if_mask & (1 << i)) == 0) + continue; + /* + * 5. Without changing any other fields in + * LMC(0..3)_DDR_PLL_CTL, write + * LMC(0..3)_DDR_PLL_CTL[PHY_DCOK] = 1. + */ + + ddr_pll_ctl.u64 = lmc_rd(priv, + CVMX_LMCX_DDR_PLL_CTL(i)); + ddr_pll_ctl.cn78xx.phy_dcok = 1; + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(i), ddr_pll_ctl.u64); + /* + * 6. Read LMC(0..3)_DDR_PLL_CTL and wait for + * the result. + */ + + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(i)); + + /* + * 7. Wait a minimum of 20 us. + */ + + udelay(20); /* Wait 20 us */ + } + + /* + * 5.9.4 LMC DRESET Initialization + * + * All of the DDR PLL, LMC global CK, and LMC interface + * enable initializations must be completed prior to starting + * this LMC DRESET initialization (Step 4). + * + * This LMC DRESET step is done for all enabled LMCs. + * + * There are special constraints on the ordering of DRESET + * initialization (Steps 4) and CK local initialization + * (Step 5) whenever CK local initialization must be executed. + * CK local initialization must be executed whenever the DDR + * PLL is being brought up (for each chip reset* and whenever + * the DDR clock speed changes). + * + * When Step 5 must be executed in the two-LMC mode case: + * - LMC0 DRESET initialization must occur before Step 5. + * - LMC1 DRESET initialization must occur after Step 5. + * + * When Step 5 must be executed in the four-LMC mode case: + * - LMC2 and LMC3 DRESET initialization must occur before + * Step 5. + * - LMC0 and LMC1 DRESET initialization must occur after + * Step 5. + */ + + if (octeon_is_cpuid(OCTEON_CN73XX)) { + /* ONE-LMC or TWO-LMC MODE BEFORE STEP 5 for cn73xx */ + cn78xx_lmc_dreset_init(priv, 0); + } else if (octeon_is_cpuid(OCTEON_CNF75XX)) { + if (if_mask == 0x3) { + /* + * 2-LMC Mode: LMC1 DRESET must occur + * before Step 5 + */ + cn78xx_lmc_dreset_init(priv, 1); + } + } else { + /* TWO-LMC MODE DRESET BEFORE STEP 5 */ + if (if_mask == 0x3) + cn78xx_lmc_dreset_init(priv, 0); + + /* FOUR-LMC MODE BEFORE STEP 5 */ + if (if_mask == 0xf) { + cn78xx_lmc_dreset_init(priv, 2); + cn78xx_lmc_dreset_init(priv, 3); + } + } + + /* + * 5.9.5 LMC CK Local Initialization + * + * All of DDR PLL, LMC global CK, and LMC interface-enable + * initializations must be completed prior to starting this + * LMC CK local initialization (Step 5). + * + * LMC CK Local initialization must be performed for each + * chip reset and whenever the DDR clock speed changes. This + * step needs to be performed only once, not once per LMC. + * + * There are special constraints on the ordering of DRESET + * initialization (Steps 4) and CK local initialization + * (Step 5) whenever CK local initialization must be executed. + * CK local initialization must be executed whenever the + * DDR PLL is being brought up (for each chip reset and + * whenever the DDR clock speed changes). + * + * When Step 5 must be executed in the two-LMC mode case: + * - LMC0 DRESET initialization must occur before Step 5. + * - LMC1 DRESET initialization must occur after Step 5. + * + * When Step 5 must be executed in the four-LMC mode case: + * - LMC2 and LMC3 DRESET initialization must occur before + * Step 5. + * - LMC0 and LMC1 DRESET initialization must occur after + * Step 5. + * + * LMC CK local initialization is different depending on + * whether two-LMC or four-LMC modes are desired. + */ + + if (if_mask == 0x3) { + int temp_lmc_if_num = octeon_is_cpuid(OCTEON_CNF75XX) ? + 1 : 0; + + /* + * 5.9.5.1 LMC CK Local Initialization for Two-LMC + * Mode + * + * 1. Write LMC0_DLL_CTL3 to its reset value. (Note + * that LMC0_DLL_CTL3[DLL_90_BYTE_SEL] = 0x2 .. 0x8 + * should also work.) + */ + + ddr_dll_ctl3.u64 = 0; + ddr_dll_ctl3.cn78xx.dclk90_recal_dis = 1; + + if (octeon_is_cpuid(OCTEON_CNF75XX)) + ddr_dll_ctl3.cn78xx.dll90_byte_sel = 7; + else + ddr_dll_ctl3.cn78xx.dll90_byte_sel = 1; + + lmc_wr(priv, + CVMX_LMCX_DLL_CTL3(temp_lmc_if_num), + ddr_dll_ctl3.u64); + + /* + * 2. Read LMC0_DLL_CTL3 and wait for the result. + */ + + lmc_rd(priv, CVMX_LMCX_DLL_CTL3(temp_lmc_if_num)); + + /* + * 3. Without changing any other fields in + * LMC0_DLL_CTL3, write + * LMC0_DLL_CTL3[DCLK90_FWD] = 1. Writing + * LMC0_DLL_CTL3[DCLK90_FWD] = 1 + * causes clock-delay information to be forwarded + * from LMC0 to LMC1. + */ + + ddr_dll_ctl3.cn78xx.dclk90_fwd = 1; + lmc_wr(priv, + CVMX_LMCX_DLL_CTL3(temp_lmc_if_num), + ddr_dll_ctl3.u64); + + /* + * 4. Read LMC0_DLL_CTL3 and wait for the result. + */ + + lmc_rd(priv, CVMX_LMCX_DLL_CTL3(temp_lmc_if_num)); + } + + if (if_mask == 0xf) { + /* + * 5.9.5.2 LMC CK Local Initialization for Four-LMC + * Mode + * + * 1. Write LMC2_DLL_CTL3 to its reset value except + * LMC2_DLL_CTL3[DLL90_BYTE_SEL] = 0x7. + */ + + ddr_dll_ctl3.u64 = 0; + ddr_dll_ctl3.cn78xx.dclk90_recal_dis = 1; + ddr_dll_ctl3.cn78xx.dll90_byte_sel = 7; + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(2), ddr_dll_ctl3.u64); + + /* + * 2. Write LMC3_DLL_CTL3 to its reset value except + * LMC3_DLL_CTL3[DLL90_BYTE_SEL] = 0x2. + */ + + ddr_dll_ctl3.u64 = 0; + ddr_dll_ctl3.cn78xx.dclk90_recal_dis = 1; + ddr_dll_ctl3.cn78xx.dll90_byte_sel = 2; + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(3), ddr_dll_ctl3.u64); + + /* + * 3. Read LMC3_DLL_CTL3 and wait for the result. + */ + + lmc_rd(priv, CVMX_LMCX_DLL_CTL3(3)); + + /* + * 4. Without changing any other fields in + * LMC2_DLL_CTL3, write LMC2_DLL_CTL3[DCLK90_FWD] = 1 + * and LMC2_DLL_CTL3[DCLK90_RECAL_ DIS] = 1. + * Writing LMC2_DLL_CTL3[DCLK90_FWD] = 1 causes LMC 2 + * to forward clockdelay information to LMC0. Setting + * LMC2_DLL_CTL3[DCLK90_RECAL_DIS] to 1 prevents LMC2 + * from periodically recalibrating this delay + * information. + */ + + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(2)); + ddr_dll_ctl3.cn78xx.dclk90_fwd = 1; + ddr_dll_ctl3.cn78xx.dclk90_recal_dis = 1; + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(2), ddr_dll_ctl3.u64); + + /* + * 5. Without changing any other fields in + * LMC3_DLL_CTL3, write LMC3_DLL_CTL3[DCLK90_FWD] = 1 + * and LMC3_DLL_CTL3[DCLK90_RECAL_ DIS] = 1. + * Writing LMC3_DLL_CTL3[DCLK90_FWD] = 1 causes LMC3 + * to forward clockdelay information to LMC1. Setting + * LMC3_DLL_CTL3[DCLK90_RECAL_DIS] to 1 prevents LMC3 + * from periodically recalibrating this delay + * information. + */ + + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(3)); + ddr_dll_ctl3.cn78xx.dclk90_fwd = 1; + ddr_dll_ctl3.cn78xx.dclk90_recal_dis = 1; + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(3), ddr_dll_ctl3.u64); + + /* + * 6. Read LMC3_DLL_CTL3 and wait for the result. + */ + + lmc_rd(priv, CVMX_LMCX_DLL_CTL3(3)); + } + + if (octeon_is_cpuid(OCTEON_CNF75XX)) { + /* + * cnf75xx 2-LMC Mode: LMC0 DRESET must occur after + * Step 5, Do LMC0 for 1-LMC Mode here too + */ + cn78xx_lmc_dreset_init(priv, 0); + } + + /* TWO-LMC MODE AFTER STEP 5 */ + if (if_mask == 0x3) { + if (octeon_is_cpuid(OCTEON_CNF75XX)) { + /* + * cnf75xx 2-LMC Mode: LMC0 DRESET must + * occur after Step 5 + */ + cn78xx_lmc_dreset_init(priv, 0); + } else { + cn78xx_lmc_dreset_init(priv, 1); + } + } + + /* FOUR-LMC MODE AFTER STEP 5 */ + if (if_mask == 0xf) { + cn78xx_lmc_dreset_init(priv, 0); + cn78xx_lmc_dreset_init(priv, 1); + + /* + * Enable periodic recalibration of DDR90 delay + * line in. + */ + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(0)); + ddr_dll_ctl3.cn78xx.dclk90_recal_dis = 0; + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(0), ddr_dll_ctl3.u64); + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(1)); + ddr_dll_ctl3.cn78xx.dclk90_recal_dis = 0; + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(1), ddr_dll_ctl3.u64); + } + + /* Enable fine tune mode for all LMCs */ + for (i = 0; i < 4; ++i) { + if ((if_mask & (1 << i)) == 0) + continue; + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(i)); + ddr_dll_ctl3.cn78xx.fine_tune_mode = 1; + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(i), ddr_dll_ctl3.u64); + } + + /* + * Enable the trim circuit on the appropriate channels to + * adjust the DDR clock duty cycle for chips that support + * it + */ + if (octeon_is_cpuid(OCTEON_CN78XX_PASS2_X) || + octeon_is_cpuid(OCTEON_CN73XX) || + octeon_is_cpuid(OCTEON_CNF75XX)) { + union cvmx_lmcx_phy_ctl lmc_phy_ctl; + int i; + + for (i = 0; i < 4; ++i) { + if ((if_mask & (1 << i)) == 0) + continue; + + lmc_phy_ctl.u64 = + lmc_rd(priv, CVMX_LMCX_PHY_CTL(i)); + + if (octeon_is_cpuid(OCTEON_CNF75XX) || + octeon_is_cpuid(OCTEON_CN73XX_PASS1_3)) { + /* Both LMCs */ + lmc_phy_ctl.s.lv_mode = 0; + } else { + /* Odd LMCs = 0, Even LMCs = 1 */ + lmc_phy_ctl.s.lv_mode = (~i) & 1; + } + + debug("LMC%d: PHY_CTL : 0x%016llx\n", + i, lmc_phy_ctl.u64); + lmc_wr(priv, CVMX_LMCX_PHY_CTL(i), + lmc_phy_ctl.u64); + } + } + } + + /* + * 5.9.6 LMC RESET Initialization + * + * NOTE: this is now done as the first step in + * init_octeon3_ddr3_interface, rather than the last step in clock + * init. This reorg allows restarting per-LMC initialization should + * problems be encountered, rather than being forced to resort to + * resetting the chip and starting all over. + * + * Look for the code in octeon3_lmc.c: perform_lmc_reset(). + */ + + /* Fallthrough for all interfaces... */ +not_if0: + + /* + * Start the DDR clock so that its frequency can be measured. + * For some chips we must activate the memory controller with + * init_start to make the DDR clock start to run. + */ + if ((!octeon_is_cpuid(OCTEON_CN6XXX)) && + (!octeon_is_cpuid(OCTEON_CNF7XXX)) && + (!octeon_is_cpuid(OCTEON_CN7XXX))) { + union cvmx_lmcx_mem_cfg0 mem_cfg0; + + mem_cfg0.u64 = 0; + mem_cfg0.s.init_start = 1; + lmc_wr(priv, CVMX_LMCX_MEM_CFG0(if_num), mem_cfg0.u64); + lmc_rd(priv, CVMX_LMCX_MEM_CFG0(if_num)); + } + + set_ddr_clock_initialized(priv, if_num, 1); + + return 0; +} + +static void octeon_ipd_delay_cycles(u64 cycles) +{ + u64 start = csr_rd(CVMX_IPD_CLK_COUNT); + + while (start + cycles > csr_rd(CVMX_IPD_CLK_COUNT)) + ; +} + +static void octeon_ipd_delay_cycles_o3(u64 cycles) +{ + u64 start = csr_rd(CVMX_FPA_CLK_COUNT); + + while (start + cycles > csr_rd(CVMX_FPA_CLK_COUNT)) + ; +} + +static u32 measure_octeon_ddr_clock(struct ddr_priv *priv, + struct ddr_conf *ddr_conf, u32 cpu_hertz, + u32 ddr_hertz, u32 ddr_ref_hertz, + int if_num, u32 if_mask) +{ + u64 core_clocks; + u64 ddr_clocks; + u64 calc_ddr_hertz; + + if (ddr_conf) { + if (initialize_ddr_clock(priv, ddr_conf, cpu_hertz, + ddr_hertz, ddr_ref_hertz, if_num, + if_mask) != 0) + return 0; + } + + /* Dynamically determine the DDR clock speed */ + if (OCTEON_IS_OCTEON2() || octeon_is_cpuid(OCTEON_CN70XX)) { + core_clocks = csr_rd(CVMX_IPD_CLK_COUNT); + ddr_clocks = lmc_rd(priv, CVMX_LMCX_DCLK_CNT(if_num)); + /* How many cpu cycles to measure over */ + octeon_ipd_delay_cycles(100000000); + core_clocks = csr_rd(CVMX_IPD_CLK_COUNT) - core_clocks; + ddr_clocks = + lmc_rd(priv, CVMX_LMCX_DCLK_CNT(if_num)) - ddr_clocks; + calc_ddr_hertz = ddr_clocks * gd->bus_clk / core_clocks; + } else if (octeon_is_cpuid(OCTEON_CN7XXX)) { + core_clocks = csr_rd(CVMX_FPA_CLK_COUNT); + ddr_clocks = lmc_rd(priv, CVMX_LMCX_DCLK_CNT(if_num)); + /* How many cpu cycles to measure over */ + octeon_ipd_delay_cycles_o3(100000000); + core_clocks = csr_rd(CVMX_FPA_CLK_COUNT) - core_clocks; + ddr_clocks = + lmc_rd(priv, CVMX_LMCX_DCLK_CNT(if_num)) - ddr_clocks; + calc_ddr_hertz = ddr_clocks * gd->bus_clk / core_clocks; + } else { + core_clocks = csr_rd(CVMX_IPD_CLK_COUNT); + /* + * ignore overflow, starts counting when we enable the + * controller + */ + ddr_clocks = lmc_rd(priv, CVMX_LMCX_DCLK_CNT_LO(if_num)); + /* How many cpu cycles to measure over */ + octeon_ipd_delay_cycles(100000000); + core_clocks = csr_rd(CVMX_IPD_CLK_COUNT) - core_clocks; + ddr_clocks = + lmc_rd(priv, CVMX_LMCX_DCLK_CNT_LO(if_num)) - ddr_clocks; + calc_ddr_hertz = ddr_clocks * cpu_hertz / core_clocks; + } + + debug("core clocks: %llu, ddr clocks: %llu, calc rate: %llu\n", + core_clocks, ddr_clocks, calc_ddr_hertz); + debug("LMC%d: Measured DDR clock: %lld, cpu clock: %u, ddr clocks: %llu\n", + if_num, calc_ddr_hertz, cpu_hertz, ddr_clocks); + + /* Check for unreasonable settings. */ + if (calc_ddr_hertz < 10000) { + udelay(8000000 * 100); + printf("DDR clock misconfigured on interface %d. Resetting...\n", + if_num); + do_reset(NULL, 0, 0, NULL); + } + + return calc_ddr_hertz; +} + +u64 lmc_ddr3_rl_dbg_read(struct ddr_priv *priv, int if_num, int idx) +{ + union cvmx_lmcx_rlevel_dbg rlevel_dbg; + union cvmx_lmcx_rlevel_ctl rlevel_ctl; + + rlevel_ctl.u64 = lmc_rd(priv, CVMX_LMCX_RLEVEL_CTL(if_num)); + rlevel_ctl.s.byte = idx; + + lmc_wr(priv, CVMX_LMCX_RLEVEL_CTL(if_num), rlevel_ctl.u64); + lmc_rd(priv, CVMX_LMCX_RLEVEL_CTL(if_num)); + + rlevel_dbg.u64 = lmc_rd(priv, CVMX_LMCX_RLEVEL_DBG(if_num)); + return rlevel_dbg.s.bitmask; +} + +u64 lmc_ddr3_wl_dbg_read(struct ddr_priv *priv, int if_num, int idx) +{ + union cvmx_lmcx_wlevel_dbg wlevel_dbg; + + wlevel_dbg.u64 = 0; + wlevel_dbg.s.byte = idx; + + lmc_wr(priv, CVMX_LMCX_WLEVEL_DBG(if_num), wlevel_dbg.u64); + lmc_rd(priv, CVMX_LMCX_WLEVEL_DBG(if_num)); + + wlevel_dbg.u64 = lmc_rd(priv, CVMX_LMCX_WLEVEL_DBG(if_num)); + return wlevel_dbg.s.bitmask; +} + +int validate_ddr3_rlevel_bitmask(struct rlevel_bitmask *rlevel_bitmask_p, + int ddr_type) +{ + int i; + int errors = 0; + u64 mask = 0; /* Used in 64-bit comparisons */ + u8 mstart = 0; + u8 width = 0; + u8 firstbit = 0; + u8 lastbit = 0; + u8 bubble = 0; + u8 tbubble = 0; + u8 blank = 0; + u8 narrow = 0; + u8 trailing = 0; + u64 bitmask = rlevel_bitmask_p->bm; + u8 extras = 0; + u8 toolong = 0; + u64 temp; + + if (bitmask == 0) { + blank += RLEVEL_BITMASK_BLANK_ERROR; + } else { + /* Look for fb, the first bit */ + temp = bitmask; + while (!(temp & 1)) { + firstbit++; + temp >>= 1; + } + + /* Look for lb, the last bit */ + lastbit = firstbit; + while ((temp >>= 1)) + lastbit++; + + /* + * Start with the max range to try to find the largest mask + * within the bitmask data + */ + width = MASKRANGE_BITS; + for (mask = MASKRANGE; mask > 0; mask >>= 1, --width) { + for (mstart = lastbit - width + 1; mstart >= firstbit; + --mstart) { + temp = mask << mstart; + if ((bitmask & temp) == temp) + goto done_now; + } + } +done_now: + /* look for any more contiguous 1's to the right of mstart */ + if (width == MASKRANGE_BITS) { // only when maximum mask + while ((bitmask >> (mstart - 1)) & 1) { + // slide right over more 1's + --mstart; + // count the number of extra bits only for DDR4 + if (ddr_type == DDR4_DRAM) + extras++; + } + } + + /* Penalize any extra 1's beyond the maximum desired mask */ + if (extras > 0) + toolong = + RLEVEL_BITMASK_TOOLONG_ERROR * ((1 << extras) - 1); + + /* Detect if bitmask is too narrow. */ + if (width < 4) + narrow = (4 - width) * RLEVEL_BITMASK_NARROW_ERROR; + + /* + * detect leading bubble bits, that is, any 0's between first + * and mstart + */ + temp = bitmask >> (firstbit + 1); + i = mstart - firstbit - 1; + while (--i >= 0) { + if ((temp & 1) == 0) + bubble += RLEVEL_BITMASK_BUBBLE_BITS_ERROR; + temp >>= 1; + } + + temp = bitmask >> (mstart + width + extras); + i = lastbit - (mstart + width + extras - 1); + while (--i >= 0) { + if (temp & 1) { + /* + * Detect 1 bits after the trailing end of + * the mask, including last. + */ + trailing += RLEVEL_BITMASK_TRAILING_BITS_ERROR; + } else { + /* + * Detect trailing bubble bits, that is, + * any 0's between end-of-mask and last + */ + tbubble += RLEVEL_BITMASK_BUBBLE_BITS_ERROR; + } + temp >>= 1; + } + } + + errors = bubble + tbubble + blank + narrow + trailing + toolong; + + /* Pass out useful statistics */ + rlevel_bitmask_p->mstart = mstart; + rlevel_bitmask_p->width = width; + + debug_bitmask_print("bm:%08lx mask:%02lx, width:%2u, mstart:%2d, fb:%2u, lb:%2u (bu:%2d, tb:%2d, bl:%2d, n:%2d, t:%2d, x:%2d) errors:%3d %s\n", + (unsigned long)bitmask, mask, width, mstart, + firstbit, lastbit, bubble, tbubble, blank, + narrow, trailing, toolong, errors, + (errors) ? "=> invalid" : ""); + + return errors; +} + +int compute_ddr3_rlevel_delay(u8 mstart, u8 width, + union cvmx_lmcx_rlevel_ctl rlevel_ctl) +{ + int delay; + + debug_bitmask_print(" offset_en:%d", rlevel_ctl.s.offset_en); + + if (rlevel_ctl.s.offset_en) { + delay = max((int)mstart, + (int)(mstart + width - 1 - rlevel_ctl.s.offset)); + } else { + /* if (rlevel_ctl.s.offset) { *//* Experimental */ + if (0) { + delay = max(mstart + rlevel_ctl.s.offset, mstart + 1); + /* + * Insure that the offset delay falls within the + * bitmask + */ + delay = min(delay, mstart + width - 1); + } else { + /* Round down */ + delay = (width - 1) / 2 + mstart; + } + } + + return delay; +} + +/* Default ODT config must disable ODT */ +/* Must be const (read only) so that the structure is in flash */ +const struct dimm_odt_config disable_odt_config[] = { + /* 1 */ { 0, 0x0000, {.u64 = 0x0000}, {.u64 = 0x0000}, 0, 0x0000, 0 }, + /* 2 */ { 0, 0x0000, {.u64 = 0x0000}, {.u64 = 0x0000}, 0, 0x0000, 0 }, + /* 3 */ { 0, 0x0000, {.u64 = 0x0000}, {.u64 = 0x0000}, 0, 0x0000, 0 }, + /* 4 */ { 0, 0x0000, {.u64 = 0x0000}, {.u64 = 0x0000}, 0, 0x0000, 0 }, +}; + +/* Memory controller setup function */ +static int init_octeon_dram_interface(struct ddr_priv *priv, + struct ddr_conf *ddr_conf, + u32 ddr_hertz, u32 cpu_hertz, + u32 ddr_ref_hertz, int if_num, + u32 if_mask) +{ + u32 mem_size_mbytes = 0; + char *s; + + s = lookup_env(priv, "ddr_timing_hertz"); + if (s) + ddr_hertz = simple_strtoul(s, NULL, 0); + + if (OCTEON_IS_OCTEON3()) { + int lmc_restart_retries = 0; +#define DEFAULT_RESTART_RETRIES 3 + int lmc_restart_retries_limit = DEFAULT_RESTART_RETRIES; + + s = lookup_env(priv, "ddr_restart_retries_limit"); + if (s) + lmc_restart_retries_limit = simple_strtoul(s, NULL, 0); + +restart_lmc_init: + mem_size_mbytes = init_octeon3_ddr3_interface(priv, ddr_conf, + ddr_hertz, + cpu_hertz, + ddr_ref_hertz, + if_num, if_mask); + if (mem_size_mbytes == 0) { // 0 means restart is possible + if (lmc_restart_retries < lmc_restart_retries_limit) { + lmc_restart_retries++; + printf("N0.LMC%d Configuration problem: attempting LMC reset and init restart %d\n", + if_num, lmc_restart_retries); + goto restart_lmc_init; + } else { + if (lmc_restart_retries_limit > 0) { + printf("INFO: N0.LMC%d Configuration: fatal problem remains after %d LMC init retries - Resetting node...\n", + if_num, lmc_restart_retries); + mdelay(500); + do_reset(NULL, 0, 0, NULL); + } else { + // return an error, no restart + mem_size_mbytes = -1; + } + } + } + } + + debug("N0.LMC%d Configuration Completed: %d MB\n", + if_num, mem_size_mbytes); + + return mem_size_mbytes; +} + +#define WLEVEL_BYTE_BITS 5 +#define WLEVEL_BYTE_MSK ((1ULL << 5) - 1) + +void upd_wl_rank(union cvmx_lmcx_wlevel_rankx *lmc_wlevel_rank, + int byte, int delay) +{ + union cvmx_lmcx_wlevel_rankx temp_wlevel_rank; + + if (byte >= 0 && byte <= 8) { + temp_wlevel_rank.u64 = lmc_wlevel_rank->u64; + temp_wlevel_rank.u64 &= + ~(WLEVEL_BYTE_MSK << (WLEVEL_BYTE_BITS * byte)); + temp_wlevel_rank.u64 |= + ((delay & WLEVEL_BYTE_MSK) << (WLEVEL_BYTE_BITS * byte)); + lmc_wlevel_rank->u64 = temp_wlevel_rank.u64; + } +} + +int get_wl_rank(union cvmx_lmcx_wlevel_rankx *lmc_wlevel_rank, int byte) +{ + int delay = 0; + + if (byte >= 0 && byte <= 8) + delay = + ((lmc_wlevel_rank->u64) >> (WLEVEL_BYTE_BITS * + byte)) & WLEVEL_BYTE_MSK; + + return delay; +} + +void upd_rl_rank(union cvmx_lmcx_rlevel_rankx *lmc_rlevel_rank, + int byte, int delay) +{ + union cvmx_lmcx_rlevel_rankx temp_rlevel_rank; + + if (byte >= 0 && byte <= 8) { + temp_rlevel_rank.u64 = + lmc_rlevel_rank->u64 & ~(RLEVEL_BYTE_MSK << + (RLEVEL_BYTE_BITS * byte)); + temp_rlevel_rank.u64 |= + ((delay & RLEVEL_BYTE_MSK) << (RLEVEL_BYTE_BITS * byte)); + lmc_rlevel_rank->u64 = temp_rlevel_rank.u64; + } +} + +int get_rl_rank(union cvmx_lmcx_rlevel_rankx *lmc_rlevel_rank, int byte) +{ + int delay = 0; + + if (byte >= 0 && byte <= 8) + delay = + ((lmc_rlevel_rank->u64) >> (RLEVEL_BYTE_BITS * + byte)) & RLEVEL_BYTE_MSK; + + return delay; +} + +void rlevel_to_wlevel(union cvmx_lmcx_rlevel_rankx *lmc_rlevel_rank, + union cvmx_lmcx_wlevel_rankx *lmc_wlevel_rank, int byte) +{ + int byte_delay = get_rl_rank(lmc_rlevel_rank, byte); + + debug("Estimating Wlevel delay byte %d: ", byte); + debug("Rlevel=%d => ", byte_delay); + byte_delay = divide_roundup(byte_delay, 2) & 0x1e; + debug("Wlevel=%d\n", byte_delay); + upd_wl_rank(lmc_wlevel_rank, byte, byte_delay); +} + +/* Delay trend: constant=0, decreasing=-1, increasing=1 */ +static s64 calc_delay_trend(s64 v) +{ + if (v == 0) + return 0; + if (v < 0) + return -1; + + return 1; +} + +/* + * Evaluate delay sequence across the whole range of byte delays while + * keeping track of the overall delay trend, increasing or decreasing. + * If the trend changes charge an error amount to the score. + */ + +// NOTE: "max_adj_delay_inc" argument is, by default, 1 for DDR3 and 2 for DDR4 + +int nonseq_del(struct rlevel_byte_data *rlevel_byte, int start, int end, + int max_adj_delay_inc) +{ + s64 error = 0; + s64 delay_trend, prev_trend = 0; + int byte_idx; + s64 seq_err; + s64 adj_err; + s64 delay_inc; + s64 delay_diff; + + for (byte_idx = start; byte_idx < end; ++byte_idx) { + delay_diff = rlevel_byte[byte_idx + 1].delay - + rlevel_byte[byte_idx].delay; + delay_trend = calc_delay_trend(delay_diff); + + /* + * Increment error each time the trend changes to the + * opposite direction. + */ + if (prev_trend != 0 && delay_trend != 0 && + prev_trend != delay_trend) { + seq_err = RLEVEL_NONSEQUENTIAL_DELAY_ERROR; + } else { + seq_err = 0; + } + + // how big was the delay change, if any + delay_inc = abs(delay_diff); + + /* + * Even if the trend did not change to the opposite direction, + * check for the magnitude of the change, and scale the + * penalty by the amount that the size is larger than the + * provided limit. + */ + if (max_adj_delay_inc != 0 && delay_inc > max_adj_delay_inc) { + adj_err = (delay_inc - max_adj_delay_inc) * + RLEVEL_ADJACENT_DELAY_ERROR; + } else { + adj_err = 0; + } + + rlevel_byte[byte_idx + 1].sqerrs = seq_err + adj_err; + error += seq_err + adj_err; + + debug_bitmask_print("Byte %d: %d, Byte %d: %d, delay_trend: %ld, prev_trend: %ld, [%ld/%ld]%s%s\n", + byte_idx + 0, + rlevel_byte[byte_idx + 0].delay, + byte_idx + 1, + rlevel_byte[byte_idx + 1].delay, + delay_trend, + prev_trend, seq_err, adj_err, + (seq_err) ? + " => Nonsequential byte delay" : "", + (adj_err) ? + " => Adjacent delay error" : ""); + + if (delay_trend != 0) + prev_trend = delay_trend; + } + + return (int)error; +} + +int roundup_ddr3_wlevel_bitmask(int bitmask) +{ + int shifted_bitmask; + int leader; + int delay; + + for (leader = 0; leader < 8; ++leader) { + shifted_bitmask = (bitmask >> leader); + if ((shifted_bitmask & 1) == 0) + break; + } + + for (leader = leader; leader < 16; ++leader) { + shifted_bitmask = (bitmask >> (leader % 8)); + if (shifted_bitmask & 1) + break; + } + + delay = (leader & 1) ? leader + 1 : leader; + delay = delay % 8; + + return delay; +} + +/* Octeon 2 */ +static void oct2_ddr3_seq(struct ddr_priv *priv, int rank_mask, int if_num, + int sequence) +{ + char *s; + +#ifdef DEBUG_PERFORM_DDR3_SEQUENCE + static const char * const sequence_str[] = { + "power-up/init", + "read-leveling", + "self-refresh entry", + "self-refresh exit", + "precharge power-down entry", + "precharge power-down exit", + "write-leveling", + "illegal" + }; +#endif + + union cvmx_lmcx_control lmc_control; + union cvmx_lmcx_config lmc_config; + int save_ddr2t; + + lmc_control.u64 = lmc_rd(priv, CVMX_LMCX_CONTROL(if_num)); + save_ddr2t = lmc_control.s.ddr2t; + + if (save_ddr2t == 0 && octeon_is_cpuid(OCTEON_CN63XX_PASS1_X)) { + /* Some register parts (IDT and TI included) do not like + * the sequence that LMC generates for an MRS register + * write in 1T mode. In this case, the register part does + * not properly forward the MRS register write to the DRAM + * parts. See errata (LMC-14548) Issues with registered + * DIMMs. + */ + debug("Forcing DDR 2T during init seq. Re: Pass 1 LMC-14548\n"); + lmc_control.s.ddr2t = 1; + } + + s = lookup_env(priv, "ddr_init_2t"); + if (s) + lmc_control.s.ddr2t = simple_strtoul(s, NULL, 0); + + lmc_wr(priv, CVMX_LMCX_CONTROL(if_num), lmc_control.u64); + + lmc_config.u64 = lmc_rd(priv, CVMX_LMCX_CONFIG(if_num)); + + lmc_config.s.init_start = 1; + if (OCTEON_IS_OCTEON2()) + lmc_config.cn63xx.sequence = sequence; + lmc_config.s.rankmask = rank_mask; + +#ifdef DEBUG_PERFORM_DDR3_SEQUENCE + debug("Performing LMC sequence: rank_mask=0x%02x, sequence=%d, %s\n", + rank_mask, sequence, sequence_str[sequence]); +#endif + + lmc_wr(priv, CVMX_LMCX_CONFIG(if_num), lmc_config.u64); + lmc_rd(priv, CVMX_LMCX_CONFIG(if_num)); + udelay(600); /* Wait a while */ + + lmc_control.s.ddr2t = save_ddr2t; + lmc_wr(priv, CVMX_LMCX_CONTROL(if_num), lmc_control.u64); + lmc_rd(priv, CVMX_LMCX_CONTROL(if_num)); +} + +/* Check to see if any custom offset values are used */ +static int is_dll_offset_provided(const int8_t *dll_offset_table) +{ + int i; + + if (!dll_offset_table) /* Check for pointer to table. */ + return 0; + + for (i = 0; i < 9; ++i) { + if (dll_offset_table[i] != 0) + return 1; + } + + return 0; +} + +void change_dll_offset_enable(struct ddr_priv *priv, int if_num, int change) +{ + union cvmx_lmcx_dll_ctl3 ddr_dll_ctl3; + + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(if_num)); + SET_DDR_DLL_CTL3(offset_ena, !!change); + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(if_num), ddr_dll_ctl3.u64); + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(if_num)); +} + +unsigned short load_dll_offset(struct ddr_priv *priv, int if_num, + int dll_offset_mode, int byte_offset, int byte) +{ + union cvmx_lmcx_dll_ctl3 ddr_dll_ctl3; + int field_width = 6; + /* + * byte_sel: + * 0x1 = byte 0, ..., 0x9 = byte 8 + * 0xA = all bytes + */ + int byte_sel = (byte == 10) ? byte : byte + 1; + + if (octeon_is_cpuid(OCTEON_CN6XXX)) + field_width = 5; + + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(if_num)); + SET_DDR_DLL_CTL3(load_offset, 0); + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(if_num), ddr_dll_ctl3.u64); + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(if_num)); + + SET_DDR_DLL_CTL3(mode_sel, dll_offset_mode); + SET_DDR_DLL_CTL3(offset, + (abs(byte_offset) & (~(-1 << field_width))) | + (_sign(byte_offset) << field_width)); + SET_DDR_DLL_CTL3(byte_sel, byte_sel); + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(if_num), ddr_dll_ctl3.u64); + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(if_num)); + + SET_DDR_DLL_CTL3(load_offset, 1); + lmc_wr(priv, CVMX_LMCX_DLL_CTL3(if_num), ddr_dll_ctl3.u64); + ddr_dll_ctl3.u64 = lmc_rd(priv, CVMX_LMCX_DLL_CTL3(if_num)); + + return (unsigned short)GET_DDR_DLL_CTL3(offset); +} + +void process_custom_dll_offsets(struct ddr_priv *priv, int if_num, + const char *enable_str, + const int8_t *offsets, const char *byte_str, + int mode) +{ + const char *s; + int enabled; + int provided; + int byte_offset; + unsigned short offset[9] = { 0 }; + int byte; + + s = lookup_env(priv, enable_str); + if (s) + enabled = !!simple_strtol(s, NULL, 0); + else + enabled = -1; + + /* + * enabled == -1: no override, do only configured offsets if provided + * enabled == 0: override OFF, do NOT do it even if configured + * offsets provided + * enabled == 1: override ON, do it for overrides plus configured + * offsets + */ + + if (enabled == 0) + return; + + provided = is_dll_offset_provided(offsets); + + if (enabled < 0 && !provided) + return; + + change_dll_offset_enable(priv, if_num, 0); + + for (byte = 0; byte < 9; ++byte) { + // always take the provided, if available + byte_offset = (provided) ? offsets[byte] : 0; + + // then, if enabled, use any overrides present + if (enabled > 0) { + s = lookup_env(priv, byte_str, if_num, byte); + if (s) + byte_offset = simple_strtol(s, NULL, 0); + } + + offset[byte] = + load_dll_offset(priv, if_num, mode, byte_offset, byte); + } + + change_dll_offset_enable(priv, if_num, 1); + + debug("N0.LMC%d: DLL %s Offset 8:0 : 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n", + if_num, (mode == 2) ? "Read " : "Write", + offset[8], offset[7], offset[6], offset[5], offset[4], + offset[3], offset[2], offset[1], offset[0]); +} + +void ddr_init_seq(struct ddr_priv *priv, int rank_mask, int if_num) +{ + char *s; + int ddr_init_loops = 1; + int rankx; + + s = lookup_env(priv, "ddr%d_init_loops", if_num); + if (s) + ddr_init_loops = simple_strtoul(s, NULL, 0); + + while (ddr_init_loops--) { + for (rankx = 0; rankx < 8; rankx++) { + if (!(rank_mask & (1 << rankx))) + continue; + + if (OCTEON_IS_OCTEON3()) { + /* power-up/init */ + oct3_ddr3_seq(priv, 1 << rankx, if_num, 0); + } else { + /* power-up/init */ + oct2_ddr3_seq(priv, 1 << rankx, if_num, 0); + } + + udelay(1000); /* Wait a while. */ + + s = lookup_env(priv, "ddr_sequence1"); + if (s) { + int sequence1; + + sequence1 = simple_strtoul(s, NULL, 0); + + if (OCTEON_IS_OCTEON3()) { + oct3_ddr3_seq(priv, 1 << rankx, + if_num, sequence1); + } else { + oct2_ddr3_seq(priv, 1 << rankx, + if_num, sequence1); + } + } + + s = lookup_env(priv, "ddr_sequence2"); + if (s) { + int sequence2; + + sequence2 = simple_strtoul(s, NULL, 0); + + if (OCTEON_IS_OCTEON3()) + oct3_ddr3_seq(priv, 1 << rankx, + if_num, sequence2); + else + oct2_ddr3_seq(priv, 1 << rankx, + if_num, sequence2); + } + } + } +} + +static int octeon_ddr_initialize(struct ddr_priv *priv, u32 cpu_hertz, + u32 ddr_hertz, u32 ddr_ref_hertz, + u32 if_mask, + struct ddr_conf *ddr_conf, + u32 *measured_ddr_hertz) +{ + u32 ddr_conf_valid_mask = 0; + int memsize_mbytes = 0; + char *eptr; + int if_idx; + u32 ddr_max_speed = 667000000; + u32 calc_ddr_hertz = -1; + int val; + int ret; + + if (env_get("ddr_verbose") || env_get("ddr_prompt")) + priv->flags |= FLAG_DDR_VERBOSE; + +#ifdef DDR_VERBOSE + priv->flags |= FLAG_DDR_VERBOSE; +#endif + + if (env_get("ddr_trace_init")) { + printf("Parameter ddr_trace_init found in environment.\n"); + priv->flags |= FLAG_DDR_TRACE_INIT; + priv->flags |= FLAG_DDR_VERBOSE; + } + + priv->flags |= FLAG_DDR_DEBUG; + + val = env_get_ulong("ddr_debug", 10, (u32)-1); + switch (val) { + case 0: + priv->flags &= ~FLAG_DDR_DEBUG; + printf("Parameter ddr_debug clear in environment\n"); + break; + case (u32)-1: + break; + default: + printf("Parameter ddr_debug set in environment\n"); + priv->flags |= FLAG_DDR_DEBUG; + priv->flags |= FLAG_DDR_VERBOSE; + break; + } + if (env_get("ddr_prompt")) + priv->flags |= FLAG_DDR_PROMPT; + + /* Force ddr_verbose for failsafe debugger */ + if (priv->flags & FLAG_FAILSAFE_MODE) + priv->flags |= FLAG_DDR_VERBOSE; + +#ifdef DDR_DEBUG + priv->flags |= FLAG_DDR_DEBUG; + /* Keep verbose on while we are still debugging. */ + priv->flags |= FLAG_DDR_VERBOSE; +#endif + + if ((octeon_is_cpuid(OCTEON_CN61XX) || + octeon_is_cpuid(OCTEON_CNF71XX)) && ddr_max_speed > 533333333) { + ddr_max_speed = 533333333; + } else if (octeon_is_cpuid(OCTEON_CN7XXX)) { + /* Override speed restrictions to support internal testing. */ + ddr_max_speed = 1210000000; + } + + if (ddr_hertz > ddr_max_speed) { + printf("DDR clock speed %u exceeds maximum supported DDR speed, reducing to %uHz\n", + ddr_hertz, ddr_max_speed); + ddr_hertz = ddr_max_speed; + } + + if (OCTEON_IS_OCTEON3()) { // restrict check + if (ddr_hertz > cpu_hertz) { + printf("\nFATAL ERROR: DDR speed %u exceeds CPU speed %u, exiting...\n\n", + ddr_hertz, cpu_hertz); + return -1; + } + } + + /* Enable L2 ECC */ + eptr = env_get("disable_l2_ecc"); + if (eptr) { + printf("Disabling L2 ECC based on disable_l2_ecc environment variable\n"); + union cvmx_l2c_ctl l2c_val; + + l2c_val.u64 = l2c_rd(priv, CVMX_L2C_CTL); + l2c_val.s.disecc = 1; + l2c_wr(priv, CVMX_L2C_CTL, l2c_val.u64); + } else { + union cvmx_l2c_ctl l2c_val; + + l2c_val.u64 = l2c_rd(priv, CVMX_L2C_CTL); + l2c_val.s.disecc = 0; + l2c_wr(priv, CVMX_L2C_CTL, l2c_val.u64); + } + + /* + * Init the L2C, must be done before DRAM access so that we + * know L2 is empty + */ + eptr = env_get("disable_l2_index_aliasing"); + if (eptr) { + union cvmx_l2c_ctl l2c_val; + + puts("L2 index aliasing disabled.\n"); + + l2c_val.u64 = l2c_rd(priv, CVMX_L2C_CTL); + l2c_val.s.disidxalias = 1; + l2c_wr(priv, CVMX_L2C_CTL, l2c_val.u64); + } else { + union cvmx_l2c_ctl l2c_val; + + /* Enable L2C index aliasing */ + + l2c_val.u64 = l2c_rd(priv, CVMX_L2C_CTL); + l2c_val.s.disidxalias = 0; + l2c_wr(priv, CVMX_L2C_CTL, l2c_val.u64); + } + + if (OCTEON_IS_OCTEON3()) { + /* + * rdf_cnt: Defines the sample point of the LMC response data in + * the DDR-clock/core-clock crossing. For optimal + * performance set to 10 * (DDR-clock period/core-clock + * period) - 1. To disable set to 0. All other values + * are reserved. + */ + + union cvmx_l2c_ctl l2c_ctl; + u64 rdf_cnt; + char *s; + + l2c_ctl.u64 = l2c_rd(priv, CVMX_L2C_CTL); + + /* + * It is more convenient to compute the ratio using clock + * frequencies rather than clock periods. + */ + rdf_cnt = (((u64)10 * cpu_hertz) / ddr_hertz) - 1; + rdf_cnt = rdf_cnt < 256 ? rdf_cnt : 255; + l2c_ctl.cn78xx.rdf_cnt = rdf_cnt; + + s = lookup_env(priv, "early_fill_count"); + if (s) + l2c_ctl.cn78xx.rdf_cnt = simple_strtoul(s, NULL, 0); + + debug("%-45s : %d, cpu_hertz:%d, ddr_hertz:%d\n", + "EARLY FILL COUNT ", l2c_ctl.cn78xx.rdf_cnt, cpu_hertz, + ddr_hertz); + l2c_wr(priv, CVMX_L2C_CTL, l2c_ctl.u64); + } + + /* Check for lower DIMM socket populated */ + for (if_idx = 0; if_idx < 4; ++if_idx) { + if ((if_mask & (1 << if_idx)) && + validate_dimm(priv, + &ddr_conf[(int)if_idx].dimm_config_table[0], + 0)) + ddr_conf_valid_mask |= (1 << if_idx); + } + + if (octeon_is_cpuid(OCTEON_CN68XX) || octeon_is_cpuid(OCTEON_CN78XX)) { + int four_lmc_mode = 1; + char *s; + + if (priv->flags & FLAG_FAILSAFE_MODE) + four_lmc_mode = 0; + + /* Pass 1.0 disable four LMC mode. + * See errata (LMC-15811) + */ + if (octeon_is_cpuid(OCTEON_CN68XX_PASS1_0)) + four_lmc_mode = 0; + + s = env_get("ddr_four_lmc"); + if (s) { + four_lmc_mode = simple_strtoul(s, NULL, 0); + printf("Parameter found in environment. ddr_four_lmc = %d\n", + four_lmc_mode); + } + + if (!four_lmc_mode) { + puts("Forcing two-LMC Mode.\n"); + /* Invalidate LMC[2:3] */ + ddr_conf_valid_mask &= ~(3 << 2); + } + } else if (octeon_is_cpuid(OCTEON_CN73XX)) { + int one_lmc_mode = 0; + char *s; + + s = env_get("ddr_one_lmc"); + if (s) { + one_lmc_mode = simple_strtoul(s, NULL, 0); + printf("Parameter found in environment. ddr_one_lmc = %d\n", + one_lmc_mode); + } + + if (one_lmc_mode) { + puts("Forcing one-LMC Mode.\n"); + /* Invalidate LMC[1:3] */ + ddr_conf_valid_mask &= ~(1 << 1); + } + } + + if (!ddr_conf_valid_mask) { + printf + ("ERROR: No valid DIMMs detected on any DDR interface.\n"); + hang(); + return -1; // testr-only: no ret negativ!!! + } + + /* + * We measure the DDR frequency by counting DDR clocks. We can + * confirm or adjust the expected frequency as necessary. We use + * the measured frequency to make accurate timing calculations + * used to configure the controller. + */ + for (if_idx = 0; if_idx < 4; ++if_idx) { + u32 tmp_hertz; + + if (!(ddr_conf_valid_mask & (1 << if_idx))) + continue; + +try_again: + /* + * only check for alternate refclk wanted on chips that + * support it + */ + if ((octeon_is_cpuid(OCTEON_CN73XX)) || + (octeon_is_cpuid(OCTEON_CNF75XX)) || + (octeon_is_cpuid(OCTEON_CN78XX_PASS2_X))) { + // only need do this if we are LMC0 + if (if_idx == 0) { + union cvmx_lmcx_ddr_pll_ctl ddr_pll_ctl; + + ddr_pll_ctl.u64 = + lmc_rd(priv, CVMX_LMCX_DDR_PLL_CTL(0)); + + /* + * If we are asking for 100 MHz refclk, we can + * only get it via alternate, so switch to it + */ + if (ddr_ref_hertz == 100000000) { + ddr_pll_ctl.cn78xx.dclk_alt_refclk_sel = + 1; + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(0), + ddr_pll_ctl.u64); + udelay(1000); // wait 1 msec + } else { + /* + * If we are NOT asking for 100MHz, + * then reset to (assumed) 50MHz and go + * on + */ + ddr_pll_ctl.cn78xx.dclk_alt_refclk_sel = + 0; + lmc_wr(priv, CVMX_LMCX_DDR_PLL_CTL(0), + ddr_pll_ctl.u64); + udelay(1000); // wait 1 msec + } + } + } else { + if (ddr_ref_hertz == 100000000) { + debug("N0: DRAM init: requested 100 MHz refclk NOT SUPPORTED\n"); + ddr_ref_hertz = CONFIG_REF_HERTZ; + } + } + + tmp_hertz = measure_octeon_ddr_clock(priv, &ddr_conf[if_idx], + cpu_hertz, ddr_hertz, + ddr_ref_hertz, if_idx, + ddr_conf_valid_mask); + + /* + * only check for alternate refclk acquired on chips that + * support it + */ + if ((octeon_is_cpuid(OCTEON_CN73XX)) || + (octeon_is_cpuid(OCTEON_CNF75XX)) || + (octeon_is_cpuid(OCTEON_CN78XX_PASS2_X))) { + /* + * if we are LMC0 and we are asked for 100 MHz refclk, + * we must be sure it is available + * If not, we print an error message, set to 50MHz, + * and go on... + */ + if (if_idx == 0 && ddr_ref_hertz == 100000000) { + /* + * Validate that the clock returned is close + * enough to the clock desired + */ + // FIXME: is 5% close enough? + int hertz_diff = + abs((int)tmp_hertz - (int)ddr_hertz); + if (hertz_diff > ((int)ddr_hertz * 5 / 100)) { + // nope, diff is greater than than 5% + debug("N0: DRAM init: requested 100 MHz refclk NOT FOUND\n"); + ddr_ref_hertz = CONFIG_REF_HERTZ; + // clear the flag before trying again!! + set_ddr_clock_initialized(priv, 0, 0); + goto try_again; + } else { + debug("N0: DRAM Init: requested 100 MHz refclk FOUND and SELECTED\n"); + } + } + } + + if (tmp_hertz > 0) + calc_ddr_hertz = tmp_hertz; + debug("LMC%d: measured speed: %u hz\n", if_idx, tmp_hertz); + } + + if (measured_ddr_hertz) + *measured_ddr_hertz = calc_ddr_hertz; + + memsize_mbytes = 0; + for (if_idx = 0; if_idx < 4; ++if_idx) { + if (!(ddr_conf_valid_mask & (1 << if_idx))) + continue; + + ret = init_octeon_dram_interface(priv, &ddr_conf[if_idx], + calc_ddr_hertz, + cpu_hertz, ddr_ref_hertz, + if_idx, ddr_conf_valid_mask); + if (ret > 0) + memsize_mbytes += ret; + } + + if (memsize_mbytes == 0) + /* All interfaces failed to initialize, so return error */ + return -1; + + /* + * switch over to DBI mode only for chips that support it, and + * enabled by envvar + */ + if ((octeon_is_cpuid(OCTEON_CN73XX)) || + (octeon_is_cpuid(OCTEON_CNF75XX)) || + (octeon_is_cpuid(OCTEON_CN78XX_PASS2_X))) { + eptr = env_get("ddr_dbi_switchover"); + if (eptr) { + printf("DBI Switchover starting...\n"); + cvmx_dbi_switchover(priv); + printf("DBI Switchover finished.\n"); + } + } + + /* call HW-assist tuning here on chips that support it */ + if ((octeon_is_cpuid(OCTEON_CN73XX)) || + (octeon_is_cpuid(OCTEON_CNF75XX)) || + (octeon_is_cpuid(OCTEON_CN78XX_PASS2_X))) + cvmx_maybe_tune_node(priv, calc_ddr_hertz); + + eptr = env_get("limit_dram_mbytes"); + if (eptr) { + unsigned int mbytes = simple_strtoul(eptr, NULL, 10); + + if (mbytes > 0) { + memsize_mbytes = mbytes; + printf("Limiting DRAM size to %d MBytes based on limit_dram_mbytes env. variable\n", + mbytes); + } + } + + debug("LMC Initialization complete. Total DRAM %d MB\n", + memsize_mbytes); + + return memsize_mbytes; +} + +static int octeon_ddr_probe(struct udevice *dev) +{ + struct ddr_priv *priv = dev_get_priv(dev); + struct ofnode_phandle_args l2c_node; + struct ddr_conf *ddr_conf_ptr; + u32 ddr_conf_valid_mask = 0; + u32 measured_ddr_hertz = 0; + int conf_table_count; + int def_ddr_freq; + u32 mem_mbytes = 0; + u32 ddr_hertz; + u32 ddr_ref_hertz; + int alt_refclk; + const char *eptr; + fdt_addr_t addr; + u64 *ptr; + u64 val; + int ret; + int i; + + /* Don't try to re-init the DDR controller after relocation */ + if (gd->flags & GD_FLG_RELOC) + return 0; + + /* + * Dummy read all local variables into cache, so that they are + * locked in cache when the DDR code runs with flushes etc enabled + */ + ptr = (u64 *)_end; + for (i = 0; i < (0x100000 / sizeof(u64)); i++) + val = readq(ptr++); + + /* + * The base addresses of LMC and L2C are read from the DT. This + * makes it possible to use the DDR init code without the need + * of the "node" variable, describing on which node to access. The + * node number is already included implicitly in the base addresses + * read from the DT this way. + */ + + /* Get LMC base address */ + priv->lmc_base = dev_remap_addr(dev); + debug("%s: lmc_base=%p\n", __func__, priv->lmc_base); + + /* Get L2C base address */ + ret = dev_read_phandle_with_args(dev, "l2c-handle", NULL, 0, 0, + &l2c_node); + if (ret) { + printf("Can't access L2C node!\n"); + return -ENODEV; + } + + addr = ofnode_get_addr(l2c_node.node); + if (addr == FDT_ADDR_T_NONE) { + printf("Can't access L2C node!\n"); + return -ENODEV; + } + + priv->l2c_base = map_physmem(addr, 0, MAP_NOCACHE); + debug("%s: l2c_base=%p\n", __func__, priv->l2c_base); + + ddr_conf_ptr = octeon_ddr_conf_table_get(&conf_table_count, + &def_ddr_freq); + if (!ddr_conf_ptr) { + printf("ERROR: unable to determine DDR configuration\n"); + return -ENODEV; + } + + for (i = 0; i < conf_table_count; i++) { + if (ddr_conf_ptr[i].dimm_config_table[0].spd_addrs[0] || + ddr_conf_ptr[i].dimm_config_table[0].spd_ptrs[0]) + ddr_conf_valid_mask |= 1 << i; + } + + /* + * Check for special case of mismarked 3005 samples, + * and adjust cpuid + */ + alt_refclk = 0; + ddr_hertz = def_ddr_freq * 1000000; + + eptr = env_get("ddr_clock_hertz"); + if (eptr) { + ddr_hertz = simple_strtoul(eptr, NULL, 0); + gd->mem_clk = divide_nint(ddr_hertz, 1000000); + printf("Parameter found in environment. ddr_clock_hertz = %d\n", + ddr_hertz); + } + + ddr_ref_hertz = octeon3_refclock(alt_refclk, + ddr_hertz, + &ddr_conf_ptr[0].dimm_config_table[0]); + + debug("Initializing DDR, clock = %uhz, reference = %uhz\n", + ddr_hertz, ddr_ref_hertz); + + mem_mbytes = octeon_ddr_initialize(priv, gd->cpu_clk, + ddr_hertz, ddr_ref_hertz, + ddr_conf_valid_mask, + ddr_conf_ptr, &measured_ddr_hertz); + debug("Mem size in MBYTES: %u\n", mem_mbytes); + + gd->mem_clk = divide_nint(measured_ddr_hertz, 1000000); + + debug("Measured DDR clock %d Hz\n", measured_ddr_hertz); + + if (measured_ddr_hertz != 0) { + if (!gd->mem_clk) { + /* + * If ddr_clock not set, use measured clock + * and don't warn + */ + gd->mem_clk = divide_nint(measured_ddr_hertz, 1000000); + } else if ((measured_ddr_hertz > ddr_hertz + 3000000) || + (measured_ddr_hertz < ddr_hertz - 3000000)) { + printf("\nWARNING:\n"); + printf("WARNING: Measured DDR clock mismatch! expected: %lld MHz, measured: %lldMHz, cpu clock: %lu MHz\n", + divide_nint(ddr_hertz, 1000000), + divide_nint(measured_ddr_hertz, 1000000), + gd->cpu_clk); + printf("WARNING:\n\n"); + gd->mem_clk = divide_nint(measured_ddr_hertz, 1000000); + } + } + + if (!mem_mbytes) + return -ENODEV; + + priv->info.base = CONFIG_SYS_SDRAM_BASE; + priv->info.size = MB(mem_mbytes); + + /* + * For 6XXX generate a proper error when reading/writing + * non-existent memory locations. + */ + cvmx_l2c_set_big_size(priv, mem_mbytes, 0); + + debug("Ram size %uMiB\n", mem_mbytes); + + return 0; +} + +static int octeon_get_info(struct udevice *dev, struct ram_info *info) +{ + struct ddr_priv *priv = dev_get_priv(dev); + + *info = priv->info; + + return 0; +} + +static struct ram_ops octeon_ops = { + .get_info = octeon_get_info, +}; + +static const struct udevice_id octeon_ids[] = { + {.compatible = "cavium,octeon-7xxx-ddr4" }, + { } +}; + +U_BOOT_DRIVER(octeon_ddr) = { + .name = "octeon_ddr", + .id = UCLASS_RAM, + .of_match = octeon_ids, + .ops = &octeon_ops, + .probe = octeon_ddr_probe, + .platdata_auto_alloc_size = sizeof(struct ddr_priv), +};