From: Tom Rini Date: Wed, 30 Mar 2022 22:07:18 +0000 (-0400) Subject: corvus: Migrate CONFIG_*_LED out of CONFIG namespace X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e0f0f1836b43e242eb71a6d316d8d507f9075ff9;p=u-boot.git corvus: Migrate CONFIG_*_LED out of CONFIG namespace This code is only used on the corvus platform, so migrate the LED on/off code to this platform and remove it from the CONFIG namespace. In theory, this should likely be moved to the modern GPIO LED driver as a further cleanup. Cc: Heiko Schocher Signed-off-by: Tom Rini Reviewed-by: Heiko Schocher --- diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c index a6e1737be0..90fece7f95 100644 --- a/board/siemens/corvus/board.c +++ b/board/siemens/corvus/board.c @@ -52,8 +52,28 @@ static void corvus_request_gpio(void) gpio_request(AT91_PIN_PD3, "USB1"); gpio_request(AT91_PIN_PB18, "SPICS1"); gpio_request(AT91_PIN_PB3, "SPICS0"); - gpio_request(CONFIG_RED_LED, "red led"); - gpio_request(CONFIG_GREEN_LED, "green led"); + gpio_request(AT91_PIN_PD31, "red led"); /* this is the user1 led */ + gpio_request(AT91_PIN_PD0, "green led"); /* this is the user2 led */ +} + +void red_led_on(void) +{ + gpio_set_value(AT91_PIN_PD31, 1); +} + +void red_led_off(void) +{ + gpio_set_value(AT91_PIN_PD31, 0); +} + +void green_led_on(void) +{ + gpio_set_value(AT91_PIN_PD0, 0); +} + +void green_led_off(void) +{ + gpio_set_value(AT91_PIN_PD0, 1); } static void corvus_nand_hw_init(void) diff --git a/include/configs/corvus.h b/include/configs/corvus.h index bb73201b54..4809b59ecc 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -31,10 +31,6 @@ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS -/* LED */ -#define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ -#define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ - /* SDRAM */ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 #define CONFIG_SYS_SDRAM_SIZE 0x08000000