From: Lokesh Vutla Date: Mon, 27 Aug 2018 10:27:11 +0000 (+0530) Subject: arm: K3: am654: Add support for boot device detection X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=e00646099f7219328ed61882211fdb95f380028c;p=u-boot.git arm: K3: am654: Add support for boot device detection AM654 allows for booting from primary or backup boot media. Both media can be chosen individually based on switch settings. ROM looks for a valid image in primary boot media, if not found then looks in backup boot media. In order to pass this boot media information to boot loader, ROM stores a value at a particular address. Add support for reading this information and determining the boot media correctly. Signed-off-by: Lokesh Vutla Signed-off-by: Andreas Dannenberg Signed-off-by: Vignesh R Reviewed-by: Tom Rini --- diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h index b9e8a4f5d5..e568af2561 100644 --- a/arch/arm/include/asm/spl.h +++ b/arch/arm/include/asm/spl.h @@ -8,7 +8,7 @@ #if defined(CONFIG_ARCH_OMAP2PLUS) \ || defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5) \ - || defined(CONFIG_EXYNOS4210) + || defined(CONFIG_EXYNOS4210) || defined(CONFIG_ARCH_K3) /* Platform-specific defines */ #include diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig index 9892f574c2..1380013fe7 100644 --- a/arch/arm/mach-k3/Kconfig +++ b/arch/arm/mach-k3/Kconfig @@ -40,4 +40,11 @@ config SYS_K3_MCU_SCRATCHPAD_SIZE help Describes the size of MCU Scratchpad RAM. +config SYS_K3_BOOT_PARAM_TABLE_INDEX + hex + default 0x41c7fbfc if SOC_K3_AM6 + help + Address at which ROM stores the value which determines if SPL + is booted up by primary boot media or secondary boot media. + endif diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c index 7a78e85938..671498a99b 100644 --- a/arch/arm/mach-k3/am6_init.c +++ b/arch/arm/mach-k3/am6_init.c @@ -7,11 +7,26 @@ */ #include +#include #include +#include #ifdef CONFIG_SPL_BUILD +static void store_boot_index_from_rom(void) +{ + u32 *boot_index = (u32 *)K3_BOOT_PARAM_TABLE_INDEX_VAL; + + *boot_index = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX); +} + void board_init_f(ulong dummy) { + /* + * Cannot delay this further as there is a chance that + * K3_BOOT_PARAM_TABLE_INDEX can be over written by SPL MALLOC section. + */ + store_boot_index_from_rom(); + /* Init DM early in-order to invoke system controller */ spl_early_init(); @@ -19,10 +34,51 @@ void board_init_f(ulong dummy) preloader_console_init(); } -u32 spl_boot_device(void) +static u32 __get_backup_bootmedia(u32 devstat) { + u32 bkup_boot = (devstat & CTRLMMR_MAIN_DEVSTAT_BKUP_BOOTMODE_MASK) >> + CTRLMMR_MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT; + + switch (bkup_boot) { + case BACKUP_BOOT_DEVICE_USB: + return BOOT_DEVICE_USB; + case BACKUP_BOOT_DEVICE_UART: + return BOOT_DEVICE_UART; + case BACKUP_BOOT_DEVICE_ETHERNET: + return BOOT_DEVICE_ETHERNET; + case BACKUP_BOOT_DEVICE_MMC2: + return BOOT_DEVICE_MMC2; + case BACKUP_BOOT_DEVICE_SPI: + return BOOT_DEVICE_SPI; + case BACKUP_BOOT_DEVICE_HYPERFLASH: + return BOOT_DEVICE_HYPERFLASH; + case BACKUP_BOOT_DEVICE_I2C: + return BOOT_DEVICE_I2C; + }; + return BOOT_DEVICE_RAM; } + +static u32 __get_primary_bootmedia(u32 devstat) +{ + u32 bootmode = devstat & CTRLMMR_MAIN_DEVSTAT_BOOTMODE_MASK; + + if (bootmode == BOOT_DEVICE_OSPI || bootmode == BOOT_DEVICE_QSPI) + bootmode = BOOT_DEVICE_SPI; + + return bootmode; +} + +u32 spl_boot_device(void) +{ + u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT); + u32 bootindex = readl(K3_BOOT_PARAM_TABLE_INDEX_VAL); + + if (bootindex == K3_PRIMARY_BOOTMODE) + return __get_primary_bootmedia(devstat); + else + return __get_backup_bootmedia(devstat); +} #endif #ifndef CONFIG_SYSRESET diff --git a/arch/arm/mach-k3/include/mach/am6_hardware.h b/arch/arm/mach-k3/include/mach/am6_hardware.h new file mode 100644 index 0000000000..1f918404c0 --- /dev/null +++ b/arch/arm/mach-k3/include/mach/am6_hardware.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * K3: AM6 SoC definitions, structures etc. + * + * (C) Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + */ +#ifndef __ASM_ARCH_AM6_HARDWARE_H +#define __ASM_ARCH_AM6_HARDWARE_H + +#include + +#define CTRL_MMR0_BASE 0x00100000 +#define CTRLMMR_MAIN_DEVSTAT (CTRL_MMR0_BASE + 0x30) + +#define CTRLMMR_MAIN_DEVSTAT_BOOTMODE_MASK GENMASK(3, 0) +#define CTRLMMR_MAIN_DEVSTAT_BOOTMODE_SHIFT 0 +#define CTRLMMR_MAIN_DEVSTAT_BKUP_BOOTMODE_MASK GENMASK(6, 4) +#define CTRLMMR_MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT 4 + +/* MCU SCRATCHPAD usage */ +#define K3_BOOT_PARAM_TABLE_INDEX_VAL CONFIG_SYS_K3_MCU_SCRATCHPAD_BASE + +#endif /* __ASM_ARCH_AM6_HARDWARE_H */ diff --git a/arch/arm/mach-k3/include/mach/am6_spl.h b/arch/arm/mach-k3/include/mach/am6_spl.h new file mode 100644 index 0000000000..e97d8143c6 --- /dev/null +++ b/arch/arm/mach-k3/include/mach/am6_spl.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * Lokesh Vutla + */ +#ifndef _ASM_ARCH_AM6_SPL_H_ +#define _ASM_ARCH_AM6_SPL_H_ + +#define BOOT_DEVICE_RAM 0x00 +#define BOOT_DEVICE_OSPI 0x01 +#define BOOT_DEVICE_QSPI 0x02 +#define BOOT_DEVICE_HYPERFLASH 0x03 +#define BOOT_DEVICE_SPI 0x04 +#define BOOT_DEVICE_I2C 0x05 +#define BOOT_DEVICE_MMC2 0x06 +#define BOOT_DEVICE_ETHERNET 0x07 +#define BOOT_DEVICE_USB 0x08 +#define BOOT_DEVICE_PCIE 0x09 +#define BOOT_DEVICE_UART 0x0a +#define BOOT_DEVICE_NAND 0x0c +#define BOOT_DEVICE_MMC1 0x0d +#define BOOT_DEVICE_MMC2_2 0x0e + +#define BACKUP_BOOT_DEVICE_RAM 0x0 +#define BACKUP_BOOT_DEVICE_USB 0x1 +#define BACKUP_BOOT_DEVICE_UART 0x2 +#define BACKUP_BOOT_DEVICE_ETHERNET 0x3 +#define BACKUP_BOOT_DEVICE_MMC2 0x4 +#define BACKUP_BOOT_DEVICE_SPI 0x5 +#define BACKUP_BOOT_DEVICE_HYPERFLASH 0x6 +#define BACKUP_BOOT_DEVICE_I2C 0x7 + +#define K3_PRIMARY_BOOTMODE 0x0 +#define K3_BACKUP_BOOTMODE 0x1 + +#endif diff --git a/arch/arm/mach-k3/include/mach/hardware.h b/arch/arm/mach-k3/include/mach/hardware.h new file mode 100644 index 0000000000..b39f780d26 --- /dev/null +++ b/arch/arm/mach-k3/include/mach/hardware.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * Lokesh Vutla + */ +#ifndef _ASM_ARCH_HARDWARE_H_ +#define _ASM_ARCH_HARDWARE_H_ + +#ifdef CONFIG_SOC_K3_AM6 +#include "am6_hardware.h" +#endif +#endif /* _ASM_ARCH_HARDWARE_H_ */ diff --git a/arch/arm/mach-k3/include/mach/spl.h b/arch/arm/mach-k3/include/mach/spl.h new file mode 100644 index 0000000000..2d435aec17 --- /dev/null +++ b/arch/arm/mach-k3/include/mach/spl.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * Lokesh Vutla + */ +#ifndef _ASM_ARCH_SPL_H_ +#define _ASM_ARCH_SPL_H_ + +#ifdef CONFIG_SOC_K3_AM6 +#include "am6_spl.h" +#endif +#endif /* _ASM_ARCH_SPL_H_ */