From: Mike Looijmans Date: Fri, 18 Oct 2019 05:34:13 +0000 (+0200) Subject: board: zynqmp: Fix for wrong AMS setting by ROM X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=dfbe492edef421de09617dc26805fc428440924e;p=u-boot.git board: zynqmp: Fix for wrong AMS setting by ROM A bug in the ZynqMP bootrom sets the PS_SYSMON_ANALOG_BUS register at 0xFFA50914 to the wrong value 0x3201. This causes the AMS to exchange the PS supply voltages 0 and 1. On Xilinx boards this is not noticeable since these are tied together, it's only really noticeable if banks 500 and 501 have different supplies. Xilinx' tech support reported this undocumented register to be the cause, and this patch applies a fix for all boards by programming the correct value. Signed-off-by: Mike Looijmans Signed-off-by: Michal Simek --- diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index cb72914adb..a6cd41af1a 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -359,6 +359,9 @@ static int multi_boot(void) return 0; } +#define PS_SYSMON_ANALOG_BUS_VAL 0x3210 +#define PS_SYSMON_ANALOG_BUS_REG 0xFFA50914 + int board_init(void) { #if defined(CONFIG_ZYNQMP_FIRMWARE) @@ -378,6 +381,9 @@ int board_init(void) printf("EL Level:\tEL%d\n", current_el()); + /* Bug in ROM sets wrong value in this register */ + writel(PS_SYSMON_ANALOG_BUS_VAL, PS_SYSMON_ANALOG_BUS_REG); + #if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \ !defined(CONFIG_SPL_BUILD) || (defined(CONFIG_SPL_FPGA_SUPPORT) && \ defined(CONFIG_SPL_BUILD))