From: Priit Laes Date: Tue, 23 Oct 2018 17:20:30 +0000 (+0300) Subject: sunxi: docs: Mention CONFIG_NAND requirement X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=df4ad94d053072e71e3c131d4d47d5a84b8d1ecc;p=u-boot.git sunxi: docs: Mention CONFIG_NAND requirement Signed-off-by: Priit Laes Acked-by: Maxime Ripard Reviewed-by: Jagan Teki --- diff --git a/board/sunxi/README.nand b/board/sunxi/README.nand index a5d4ff0e90..98ebe5fb7f 100644 --- a/board/sunxi/README.nand +++ b/board/sunxi/README.nand @@ -20,9 +20,9 @@ pages. In order to accomodate that, we create a tool that will generate an SPL image that is ready to be programmed directly embedding the ECCs, randomized, and with the necessary bits needed to reduce the number of -bitflips. The U-Boot build system, when configured for the NAND will -also generate the image sunxi-spl-with-ecc.bin that will have been -generated by that tool. +bitflips. The U-Boot build system, when configured for the NAND (with +CONFIG_NAND=y) will also generate the image sunxi-spl-with-ecc.bin +that will have been generated by that tool. In order to flash your U-Boot image onto a board, assuming that the board is in FEL mode, you'll need the sunxi-tools that you can find at