From: Albert ARIBAUD Date: Sun, 7 Oct 2012 09:24:10 +0000 (+0000) Subject: arm: armv7: omap3: Fix restore sequence in lowlevel_init X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=dec96689caac25780174b4899032faf788824ac4;p=u-boot.git arm: armv7: omap3: Fix restore sequence in lowlevel_init The restore sequence in lowlevel_init was in the wrong order, causing lr to lose its original value and be set equal to ip instead. Also, its use of the stack clashes with that of s_init, so move the s_init call after the restore and turn it into a tail-optimized branch. Signed-off-by: Albert ARIBAUD Tested-by: Jeroen Hofstee --- diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index ebf69fa17d..eacfef8bbc 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -214,7 +214,7 @@ pll_div_val5: ENTRY(lowlevel_init) ldr sp, SRAM_STACK - str ip, [sp] /* stash old link register */ + str ip, [sp] /* stash ip register */ mov ip, lr /* save link reg across call */ #if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_ONENAND_BOOT) /* @@ -224,12 +224,11 @@ ENTRY(lowlevel_init) ldr r1, =SRAM_CLK_CODE bl cpy_clk_code #endif /* NAND Boot */ - bl s_init /* go setup pll, mux, memory */ - ldr ip, [sp] /* restore save ip */ mov lr, ip /* restore link reg */ + ldr ip, [sp] /* restore save ip */ + /* tail-call s_init to setup pll, mux, memory */ + b s_init - /* back to arch calling code */ - mov pc, lr ENDPROC(lowlevel_init) /* the literal pools origin */