From: Philipp Tomsich Date: Thu, 22 Jun 2017 21:47:11 +0000 (+0200) Subject: rockchip: clk: rk3368: implement bandwidth adjust for PLLs X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ddfe77df15bc1db9180b261b9c701abf4712452c;p=u-boot.git rockchip: clk: rk3368: implement bandwidth adjust for PLLs The RK3368 TRM recommends to configure the bandwith adjustment (CON2) for PLLs to NF/2. This implements this for all reconfigurations of PLLs and removes the 'has_bwadj' flag (as the RK3368 always has the bandwidth-adjustment feature according to its manual). Signed-off-by: Philipp Tomsich Reviewed-by: Simon Glass --- diff --git a/drivers/clk/rockchip/clk_rk3368.c b/drivers/clk/rockchip/clk_rk3368.c index e1d9aeb8e5..d8f06d5856 100644 --- a/drivers/clk/rockchip/clk_rk3368.c +++ b/drivers/clk/rockchip/clk_rk3368.c @@ -1,6 +1,7 @@ /* * (C) Copyright 2017 Rockchip Electronics Co., Ltd * Author: Andy Yan + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH * SPDX-License-Identifier: GPL-2.0 */ @@ -74,7 +75,7 @@ static uint32_t rkclk_pll_get_rate(struct rk3368_cru *cru, } static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id, - const struct pll_div *div, bool has_bwadj) + const struct pll_div *div) { struct rk3368_pll *pll = &cru->pll[pll_id]; /* All PLLs have same VCO and output frequency range restrictions*/ @@ -92,6 +93,12 @@ static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id, ((div->nr - 1) << PLL_NR_SHIFT) | ((div->no - 1) << PLL_OD_SHIFT)); writel((div->nf - 1) << PLL_NF_SHIFT, &pll->con1); + /* + * BWADJ should be set to NF / 2 to ensure the nominal bandwidth. + * Compare the RK3368 TRM, section "3.6.4 PLL Bandwidth Adjustment". + */ + clrsetbits_le32(&pll->con2, PLL_BWADJ_MASK, (div->nf >> 1) - 1); + udelay(10); /* return from reset */ @@ -111,10 +118,10 @@ static void rkclk_init(struct rk3368_cru *cru) { u32 apllb, aplll, dpll, cpll, gpll; - rkclk_set_pll(cru, APLLB, &apll_b_init_cfg, false); - rkclk_set_pll(cru, APLLL, &apll_l_init_cfg, false); - rkclk_set_pll(cru, GPLL, &gpll_init_cfg, false); - rkclk_set_pll(cru, CPLL, &cpll_init_cfg, false); + rkclk_set_pll(cru, APLLB, &apll_b_init_cfg); + rkclk_set_pll(cru, APLLL, &apll_l_init_cfg); + rkclk_set_pll(cru, GPLL, &gpll_init_cfg); + rkclk_set_pll(cru, CPLL, &cpll_init_cfg); apllb = rkclk_pll_get_rate(cru, APLLB); aplll = rkclk_pll_get_rate(cru, APLLL);