From: Matthias Weisser <weisserm@arcor.de>
Date: Wed, 6 Jul 2011 00:28:30 +0000 (+0000)
Subject: imx: Add support for USB EHCI on imx25
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=dddb7c9ffdb3813c1242aa43b935dd3484c53a35;p=u-boot.git

imx: Add support for USB EHCI on imx25

Adding support for USB host on imx25 using the internal PHY. Changing the name
of base address define for imx31 to get some unification.

Signed-off-by: Matthias Weisser <weisserm@arcor.de>
---

diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
index 306f966139..3c8d6076d2 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -746,7 +746,7 @@ enum iomux_pins {
 #define IRAM_SIZE	(16 * 1024)
 
 #define MX31_AIPS1_BASE_ADDR	0x43f00000
-#define MX31_OTG_BASE_ADDR	(MX31_AIPS1_BASE_ADDR + 0x88000)
+#define IMX_USB_BASE		(MX31_AIPS1_BASE_ADDR + 0x88000)
 
 /* USB portsc */
 /* values for portsc field */
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 6af35aba5f..a0cfbb74bd 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -29,6 +29,14 @@
 
 #define USBCTRL_OTGBASE_OFFSET	0x600
 
+#ifdef CONFIG_MX25
+#define MX25_USB_CTRL_IP_PUE_DOWN_BIT	(1<<6)
+#define MX25_USB_CTRL_HSTD_BIT		(1<<5)
+#define MX25_USB_CTRL_USBTE_BIT		(1<<4)
+#define MX25_USB_CTRL_OCPOL_OTG_BIT	(1<<3)
+#endif
+
+#ifdef CONFIG_MX31
 #define MX31_OTG_SIC_SHIFT	29
 #define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
 #define MX31_OTG_PM_BIT		(1 << 24)
@@ -42,12 +50,19 @@
 #define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
 #define MX31_H1_PM_BIT		(1 << 8)
 #define MX31_H1_DT_BIT		(1 << 4)
+#endif
 
 static int mxc_set_usbcontrol(int port, unsigned int flags)
 {
 	unsigned int v;
+
+#ifdef CONFIG_MX25
+	v = MX25_USB_CTRL_IP_PUE_DOWN_BIT | MX25_USB_CTRL_HSTD_BIT |
+		MX25_USB_CTRL_USBTE_BIT | MX25_USB_CTRL_OCPOL_OTG_BIT;
+#endif
+
 #ifdef CONFIG_MX31
-		v = readl(MX31_OTG_BASE_ADDR + USBCTRL_OTGBASE_OFFSET);
+		v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
 
 		switch (port) {
 		case 0:	/* OTG port */
@@ -85,36 +100,38 @@ static int mxc_set_usbcontrol(int port, unsigned int flags)
 		default:
 			return -EINVAL;
 		}
-
-		writel(v, MX31_OTG_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET);
 #endif
-		return 0;
+
+	writel(v, IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
+	return 0;
 }
 
 int ehci_hcd_init(void)
 {
-	u32 tmp;
 	struct usb_ehci *ehci;
+#ifdef CONFIG_MX31
+	u32 tmp;
 	struct clock_control_regs *sc_regs =
 		(struct clock_control_regs *)CCM_BASE;
 
 	tmp = __raw_readl(&sc_regs->ccmr);
 	__raw_writel(__raw_readl(&sc_regs->ccmr) | (1 << 9), &sc_regs->ccmr) ;
+#endif
 
 	udelay(80);
 
 	/* Take USB2 */
-	ehci = (struct usb_ehci *)(MX31_OTG_BASE_ADDR +
+	ehci = (struct usb_ehci *)(IMX_USB_BASE +
 		(0x200 * CONFIG_MXC_USB_PORT));
 	hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
 	hcor = (struct ehci_hcor *)((uint32_t) hccr +
 			HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
 	setbits_le32(&ehci->usbmode, CM_HOST);
+#ifdef CONFIG_MX31
 	setbits_le32(&ehci->control, USB_EN);
 
 	__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
-
+#endif
 	mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
 
 	udelay(10000);