From: Andrew Murray <amurray@embedded-bits.co.uk>
Date: Tue, 1 Oct 2013 14:58:56 +0000 (+0100)
Subject: usb: Fix error handling in musb_hcd.c
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ddd025bb6e283744dc93d3653a0b6fbd5c35e904;p=u-boot.git

usb: Fix error handling in musb_hcd.c

The wait_until_[rx|tx]ep_ready functions return a u8 to indicate success
containing the value 0, 1 or -1. This patch changes the return type to an
int to accommodate the negative return values.

These functions are used in the file using calls such as if (!wait_until...
Where a -1 is returned it is mishandled and treated as success instead of
a CRC error. This patch addresses this.

Cc: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Andrew Murray <amurray@embedded-bits.co.uk>
Acked-by: Marek Vasut <marex@denx.de>
---

diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index 3dc5d6a558..41a8126b3e 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -267,7 +267,7 @@ static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask)
 /*
  * waits until tx ep is ready. Returns 1 when ep is ready and 0 on error.
  */
-static u8 wait_until_txep_ready(struct usb_device *dev, u8 ep)
+static int wait_until_txep_ready(struct usb_device *dev, u8 ep)
 {
 	u16 csr;
 	int timeout = CONFIG_MUSB_TIMEOUT;
@@ -299,7 +299,7 @@ static u8 wait_until_txep_ready(struct usb_device *dev, u8 ep)
 /*
  * waits until rx ep is ready. Returns 1 when ep is ready and 0 on error.
  */
-static u8 wait_until_rxep_ready(struct usb_device *dev, u8 ep)
+static int wait_until_rxep_ready(struct usb_device *dev, u8 ep)
 {
 	u16 csr;
 	int timeout = CONFIG_MUSB_TIMEOUT;
@@ -1009,7 +1009,7 @@ int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
 			writew(csr | MUSB_TXCSR_TXPKTRDY, &musbr->txcsr);
 
 			/* Wait until the TxPktRdy bit is cleared */
-			if (!wait_until_txep_ready(dev, MUSB_BULK_EP)) {
+			if (wait_until_txep_ready(dev, MUSB_BULK_EP) != 1) {
 				readw(&musbr->txcsr);
 				usb_settoggle(dev, ep, dir_out,
 				(csr >> MUSB_TXCSR_H_DATATOGGLE_SHIFT) & 1);
@@ -1044,7 +1044,7 @@ int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
 			writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
 
 			/* Wait until the RxPktRdy bit is set */
-			if (!wait_until_rxep_ready(dev, MUSB_BULK_EP)) {
+			if (wait_until_rxep_ready(dev, MUSB_BULK_EP) != 1) {
 				csr = readw(&musbr->rxcsr);
 				usb_settoggle(dev, ep, dir_out,
 				(csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);
@@ -1217,7 +1217,7 @@ int submit_int_msg(struct usb_device *dev, unsigned long pipe,
 			writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
 
 			/* Wait until the RxPktRdy bit is set */
-			if (!wait_until_rxep_ready(dev, MUSB_INTR_EP)) {
+			if (wait_until_rxep_ready(dev, MUSB_INTR_EP) != 1) {
 				csr = readw(&musbr->rxcsr);
 				usb_settoggle(dev, ep, dir_out,
 				(csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);