From: Tom Rini Date: Fri, 6 May 2016 14:40:22 +0000 (-0400) Subject: x86: qemu: Move qfw command over to cmd and add Kconfig entry X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=dd6f3abbb81d4d0f8883a523e26fd45833a6b0d3;p=u-boot.git x86: qemu: Move qfw command over to cmd and add Kconfig entry - Move the command portion of arch/x86/cpu/qemu/fw_cfg.c into cmd/qemu_fw_cfg.c - Move arch/x86/include/asm/fw_cfg.h to include/qemu_fw_cfg.h - Rename ACPI table portion to arch/x86/cpu/qemu/acpi_table.c Signed-off-by: Tom Rini Reviewed-by: Bin Meng --- diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c index 2604a687ab..13bec7ae1e 100644 --- a/arch/x86/cpu/mp_init.c +++ b/arch/x86/cpu/mp_init.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -21,7 +22,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/x86/cpu/qemu/Makefile b/arch/x86/cpu/qemu/Makefile index 6eeddf154e..97b965c3de 100644 --- a/arch/x86/cpu/qemu/Makefile +++ b/arch/x86/cpu/qemu/Makefile @@ -7,4 +7,5 @@ ifndef CONFIG_EFI_STUB obj-y += car.o dram.o endif -obj-y += cpu.o fw_cfg.o qemu.o +obj-y += cpu.o qemu.o +obj-$(CONFIG_QEMU_ACPI_TABLE) += acpi_table.o diff --git a/arch/x86/cpu/qemu/acpi_table.c b/arch/x86/cpu/qemu/acpi_table.c new file mode 100644 index 0000000000..49381acd29 --- /dev/null +++ b/arch/x86/cpu/qemu/acpi_table.c @@ -0,0 +1,243 @@ +/* + * (C) Copyright 2015 Miao Yan + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * This function allocates memory for ACPI tables + * + * @entry : BIOS linker command entry which tells where to allocate memory + * (either high memory or low memory) + * @addr : The address that should be used for low memory allcation. If the + * memory allocation request is 'ZONE_HIGH' then this parameter will + * be ignored. + * @return: 0 on success, or negative value on failure + */ +static int bios_linker_allocate(struct bios_linker_entry *entry, u32 *addr) +{ + uint32_t size, align; + struct fw_file *file; + unsigned long aligned_addr; + + align = le32_to_cpu(entry->alloc.align); + /* align must be power of 2 */ + if (align & (align - 1)) { + printf("error: wrong alignment %u\n", align); + return -EINVAL; + } + + file = qemu_fwcfg_find_file(entry->alloc.file); + if (!file) { + printf("error: can't find file %s\n", entry->alloc.file); + return -ENOENT; + } + + size = be32_to_cpu(file->cfg.size); + + /* + * ZONE_HIGH means we need to allocate from high memory, since + * malloc space is already at the end of RAM, so we directly use it. + * If allocation zone is ZONE_FSEG, then we use the 'addr' passed + * in which is low memory + */ + if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) { + aligned_addr = (unsigned long)memalign(align, size); + if (!aligned_addr) { + printf("error: allocating resource\n"); + return -ENOMEM; + } + } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) { + aligned_addr = ALIGN(*addr, align); + } else { + printf("error: invalid allocation zone\n"); + return -EINVAL; + } + + debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n", + file->cfg.name, size, entry->alloc.zone, align, aligned_addr); + + qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select), + size, (void *)aligned_addr); + file->addr = aligned_addr; + + /* adjust address for low memory allocation */ + if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) + *addr = (aligned_addr + size); + + return 0; +} + +/* + * This function patches ACPI tables previously loaded + * by bios_linker_allocate() + * + * @entry : BIOS linker command entry which tells how to patch + * ACPI tables + * @return: 0 on success, or negative value on failure + */ +static int bios_linker_add_pointer(struct bios_linker_entry *entry) +{ + struct fw_file *dest, *src; + uint32_t offset = le32_to_cpu(entry->pointer.offset); + uint64_t pointer = 0; + + dest = qemu_fwcfg_find_file(entry->pointer.dest_file); + if (!dest || !dest->addr) + return -ENOENT; + src = qemu_fwcfg_find_file(entry->pointer.src_file); + if (!src || !src->addr) + return -ENOENT; + + debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n", + dest->addr, src->addr, offset, entry->pointer.size, pointer); + + memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size); + pointer = le64_to_cpu(pointer); + pointer += (unsigned long)src->addr; + pointer = cpu_to_le64(pointer); + memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size); + + return 0; +} + +/* + * This function updates checksum fields of ACPI tables previously loaded + * by bios_linker_allocate() + * + * @entry : BIOS linker command entry which tells where to update ACPI table + * checksums + * @return: 0 on success, or negative value on failure + */ +static int bios_linker_add_checksum(struct bios_linker_entry *entry) +{ + struct fw_file *file; + uint8_t *data, cksum = 0; + uint8_t *cksum_start; + + file = qemu_fwcfg_find_file(entry->cksum.file); + if (!file || !file->addr) + return -ENOENT; + + data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset)); + cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start)); + cksum = table_compute_checksum(cksum_start, + le32_to_cpu(entry->cksum.length)); + *data = cksum; + + return 0; +} + +unsigned install_e820_map(unsigned max_entries, struct e820entry *entries) +{ + entries[0].addr = 0; + entries[0].size = ISA_START_ADDRESS; + entries[0].type = E820_RAM; + + entries[1].addr = ISA_START_ADDRESS; + entries[1].size = ISA_END_ADDRESS - ISA_START_ADDRESS; + entries[1].type = E820_RESERVED; + + /* + * since we use memalign(malloc) to allocate high memory for + * storing ACPI tables, we need to reserve them in e820 tables, + * otherwise kernel will reclaim them and data will be corrupted + */ + entries[2].addr = ISA_END_ADDRESS; + entries[2].size = gd->relocaddr - TOTAL_MALLOC_LEN - ISA_END_ADDRESS; + entries[2].type = E820_RAM; + + /* for simplicity, reserve entire malloc space */ + entries[3].addr = gd->relocaddr - TOTAL_MALLOC_LEN; + entries[3].size = TOTAL_MALLOC_LEN; + entries[3].type = E820_RESERVED; + + entries[4].addr = gd->relocaddr; + entries[4].size = gd->ram_size - gd->relocaddr; + entries[4].type = E820_RESERVED; + + entries[5].addr = CONFIG_PCIE_ECAM_BASE; + entries[5].size = CONFIG_PCIE_ECAM_SIZE; + entries[5].type = E820_RESERVED; + + return 6; +} + +/* This function loads and patches ACPI tables provided by QEMU */ +u32 write_acpi_tables(u32 addr) +{ + int i, ret = 0; + struct fw_file *file; + struct bios_linker_entry *table_loader; + struct bios_linker_entry *entry; + uint32_t size; + + /* make sure fw_list is loaded */ + ret = qemu_fwcfg_read_firmware_list(); + if (ret) { + printf("error: can't read firmware file list\n"); + return addr; + } + + file = qemu_fwcfg_find_file("etc/table-loader"); + if (!file) { + printf("error: can't find etc/table-loader\n"); + return addr; + } + + size = be32_to_cpu(file->cfg.size); + if ((size % sizeof(*entry)) != 0) { + printf("error: table-loader maybe corrupted\n"); + return addr; + } + + table_loader = malloc(size); + if (!table_loader) { + printf("error: no memory for table-loader\n"); + return addr; + } + + qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select), + size, table_loader); + + for (i = 0; i < (size / sizeof(*entry)); i++) { + entry = table_loader + i; + switch (le32_to_cpu(entry->command)) { + case BIOS_LINKER_LOADER_COMMAND_ALLOCATE: + ret = bios_linker_allocate(entry, &addr); + if (ret) + goto out; + break; + case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER: + ret = bios_linker_add_pointer(entry); + if (ret) + goto out; + break; + case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM: + ret = bios_linker_add_checksum(entry); + if (ret) + goto out; + break; + default: + break; + } + } + +out: + if (ret) + qemu_fwcfg_free_files(); + + free(table_loader); + return addr; +} diff --git a/arch/x86/cpu/qemu/cpu.c b/arch/x86/cpu/qemu/cpu.c index a1b70c6bde..4d2989a708 100644 --- a/arch/x86/cpu/qemu/cpu.c +++ b/arch/x86/cpu/qemu/cpu.c @@ -8,8 +8,8 @@ #include #include #include +#include #include -#include DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/x86/cpu/qemu/qemu.c b/arch/x86/cpu/qemu/qemu.c index 7ad0ee49a1..b41e4ecbec 100644 --- a/arch/x86/cpu/qemu/qemu.c +++ b/arch/x86/cpu/qemu/qemu.c @@ -6,12 +6,12 @@ #include #include +#include #include #include #include #include #include -#include static bool i440fx; diff --git a/arch/x86/lib/acpi_table.c b/arch/x86/lib/acpi_table.c index 989cf7d5de..be7b824525 100644 --- a/arch/x86/lib/acpi_table.c +++ b/arch/x86/lib/acpi_table.c @@ -303,7 +303,7 @@ static void acpi_create_mcfg(struct acpi_mcfg *mcfg) /* * QEMU's version of write_acpi_tables is defined in - * arch/x86/cpu/qemu/fw_cfg.c + * arch/x86/cpu/qemu/acpi_table.c */ u32 write_acpi_tables(u32 start) { diff --git a/cmd/Kconfig b/cmd/Kconfig index 9336752128..c0fffe305c 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -593,6 +593,13 @@ config CMD_SOUND sound init - set up sound system sound play - play a sound +config CMD_QEMU_FW_CFG + bool "qfw" + depends on X86 + help + This provides access to the QEMU firmware interface. The main + feature is to allow easy loading of files passed to qemu-system + via -kernel / -initrd endmenu config CMD_BOOTSTAGE diff --git a/cmd/Makefile b/cmd/Makefile index e3e0c74ffc..d4432c84d9 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -105,6 +105,7 @@ endif obj-y += pcmcia.o obj-$(CONFIG_CMD_PORTIO) += portio.o obj-$(CONFIG_CMD_PXE) += pxe.o +obj-$(CONFIG_CMD_QEMU_FW_CFG) += qemu_fw_cfg.o obj-$(CONFIG_CMD_READ) += read.o obj-$(CONFIG_CMD_REGINFO) += reginfo.o obj-$(CONFIG_CMD_REISER) += reiser.o diff --git a/arch/x86/cpu/qemu/fw_cfg.c b/cmd/qemu_fw_cfg.c similarity index 53% rename from arch/x86/cpu/qemu/fw_cfg.c rename to cmd/qemu_fw_cfg.c index 2e2794ebd7..48ae47683f 100644 --- a/arch/x86/cpu/qemu/fw_cfg.c +++ b/cmd/qemu_fw_cfg.c @@ -8,12 +8,9 @@ #include #include #include +#include #include -#include -#include -#include #include -#include static bool fwcfg_present; static bool fwcfg_dma_present; @@ -84,8 +81,7 @@ static bool qemu_fwcfg_dma_present(void) return false; } -static void qemu_fwcfg_read_entry(uint16_t entry, - uint32_t length, void *address) +void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address) { if (fwcfg_dma_present) qemu_fwcfg_read_entry_dma(entry, length, address); @@ -168,7 +164,7 @@ static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr) return 0; } -static int qemu_fwcfg_read_firmware_list(void) +int qemu_fwcfg_read_firmware_list(void) { int i; uint32_t count; @@ -207,8 +203,7 @@ err: return -ENOMEM; } -#ifdef CONFIG_QEMU_ACPI_TABLE -static struct fw_file *qemu_fwcfg_find_file(const char *name) +struct fw_file *qemu_fwcfg_find_file(const char *name) { struct list_head *entry; struct fw_file *file; @@ -222,239 +217,17 @@ static struct fw_file *qemu_fwcfg_find_file(const char *name) return NULL; } -/* - * This function allocates memory for ACPI tables - * - * @entry : BIOS linker command entry which tells where to allocate memory - * (either high memory or low memory) - * @addr : The address that should be used for low memory allcation. If the - * memory allocation request is 'ZONE_HIGH' then this parameter will - * be ignored. - * @return: 0 on success, or negative value on failure - */ -static int bios_linker_allocate(struct bios_linker_entry *entry, u32 *addr) -{ - uint32_t size, align; - struct fw_file *file; - unsigned long aligned_addr; - - align = le32_to_cpu(entry->alloc.align); - /* align must be power of 2 */ - if (align & (align - 1)) { - printf("error: wrong alignment %u\n", align); - return -EINVAL; - } - - file = qemu_fwcfg_find_file(entry->alloc.file); - if (!file) { - printf("error: can't find file %s\n", entry->alloc.file); - return -ENOENT; - } - - size = be32_to_cpu(file->cfg.size); - - /* - * ZONE_HIGH means we need to allocate from high memory, since - * malloc space is already at the end of RAM, so we directly use it. - * If allocation zone is ZONE_FSEG, then we use the 'addr' passed - * in which is low memory - */ - if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) { - aligned_addr = (unsigned long)memalign(align, size); - if (!aligned_addr) { - printf("error: allocating resource\n"); - return -ENOMEM; - } - } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) { - aligned_addr = ALIGN(*addr, align); - } else { - printf("error: invalid allocation zone\n"); - return -EINVAL; - } - - debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n", - file->cfg.name, size, entry->alloc.zone, align, aligned_addr); - - qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select), - size, (void *)aligned_addr); - file->addr = aligned_addr; - - /* adjust address for low memory allocation */ - if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) - *addr = (aligned_addr + size); - - return 0; -} - -/* - * This function patches ACPI tables previously loaded - * by bios_linker_allocate() - * - * @entry : BIOS linker command entry which tells how to patch - * ACPI tables - * @return: 0 on success, or negative value on failure - */ -static int bios_linker_add_pointer(struct bios_linker_entry *entry) -{ - struct fw_file *dest, *src; - uint32_t offset = le32_to_cpu(entry->pointer.offset); - uint64_t pointer = 0; - - dest = qemu_fwcfg_find_file(entry->pointer.dest_file); - if (!dest || !dest->addr) - return -ENOENT; - src = qemu_fwcfg_find_file(entry->pointer.src_file); - if (!src || !src->addr) - return -ENOENT; - - debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n", - dest->addr, src->addr, offset, entry->pointer.size, pointer); - - memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size); - pointer = le64_to_cpu(pointer); - pointer += (unsigned long)src->addr; - pointer = cpu_to_le64(pointer); - memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size); - - return 0; -} - -/* - * This function updates checksum fields of ACPI tables previously loaded - * by bios_linker_allocate() - * - * @entry : BIOS linker command entry which tells where to update ACPI table - * checksums - * @return: 0 on success, or negative value on failure - */ -static int bios_linker_add_checksum(struct bios_linker_entry *entry) +void qemu_fwcfg_free_files(void) { struct fw_file *file; - uint8_t *data, cksum = 0; - uint8_t *cksum_start; - - file = qemu_fwcfg_find_file(entry->cksum.file); - if (!file || !file->addr) - return -ENOENT; - - data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset)); - cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start)); - cksum = table_compute_checksum(cksum_start, - le32_to_cpu(entry->cksum.length)); - *data = cksum; - - return 0; -} - -unsigned install_e820_map(unsigned max_entries, struct e820entry *entries) -{ - entries[0].addr = 0; - entries[0].size = ISA_START_ADDRESS; - entries[0].type = E820_RAM; - - entries[1].addr = ISA_START_ADDRESS; - entries[1].size = ISA_END_ADDRESS - ISA_START_ADDRESS; - entries[1].type = E820_RESERVED; - - /* - * since we use memalign(malloc) to allocate high memory for - * storing ACPI tables, we need to reserve them in e820 tables, - * otherwise kernel will reclaim them and data will be corrupted - */ - entries[2].addr = ISA_END_ADDRESS; - entries[2].size = gd->relocaddr - TOTAL_MALLOC_LEN - ISA_END_ADDRESS; - entries[2].type = E820_RAM; - - /* for simplicity, reserve entire malloc space */ - entries[3].addr = gd->relocaddr - TOTAL_MALLOC_LEN; - entries[3].size = TOTAL_MALLOC_LEN; - entries[3].type = E820_RESERVED; - - entries[4].addr = gd->relocaddr; - entries[4].size = gd->ram_size - gd->relocaddr; - entries[4].type = E820_RESERVED; - - entries[5].addr = CONFIG_PCIE_ECAM_BASE; - entries[5].size = CONFIG_PCIE_ECAM_SIZE; - entries[5].type = E820_RESERVED; - - return 6; -} - -/* This function loads and patches ACPI tables provided by QEMU */ -u32 write_acpi_tables(u32 addr) -{ - int i, ret = 0; - struct fw_file *file; - struct bios_linker_entry *table_loader; - struct bios_linker_entry *entry; - uint32_t size; struct list_head *list; - /* make sure fw_list is loaded */ - ret = qemu_fwcfg_read_firmware_list(); - if (ret) { - printf("error: can't read firmware file list\n"); - return addr; + list_for_each(list, &fw_list) { + file = list_entry(list, struct fw_file, list); + if (file->addr) + free((void *)file->addr); } - - file = qemu_fwcfg_find_file("etc/table-loader"); - if (!file) { - printf("error: can't find etc/table-loader\n"); - return addr; - } - - size = be32_to_cpu(file->cfg.size); - if ((size % sizeof(*entry)) != 0) { - printf("error: table-loader maybe corrupted\n"); - return addr; - } - - table_loader = malloc(size); - if (!table_loader) { - printf("error: no memory for table-loader\n"); - return addr; - } - - qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select), - size, table_loader); - - for (i = 0; i < (size / sizeof(*entry)); i++) { - entry = table_loader + i; - switch (le32_to_cpu(entry->command)) { - case BIOS_LINKER_LOADER_COMMAND_ALLOCATE: - ret = bios_linker_allocate(entry, &addr); - if (ret) - goto out; - break; - case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER: - ret = bios_linker_add_pointer(entry); - if (ret) - goto out; - break; - case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM: - ret = bios_linker_add_checksum(entry); - if (ret) - goto out; - break; - default: - break; - } - } - -out: - if (ret) { - list_for_each(list, &fw_list) { - file = list_entry(list, struct fw_file, list); - if (file->addr) - free((void *)file->addr); - } - } - - free(table_loader); - return addr; } -#endif static int qemu_fwcfg_list_firmware(void) { diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index 53b1ff65af..a813e5b438 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -20,6 +20,7 @@ CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y CONFIG_CMD_TIME=y +CONFIG_CMD_QEMU_FW_CFG=y CONFIG_CMD_BOOTSTAGE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y diff --git a/arch/x86/include/asm/fw_cfg.h b/include/qemu_fw_cfg.h similarity index 94% rename from arch/x86/include/asm/fw_cfg.h rename to include/qemu_fw_cfg.h index e9450c6196..e21f1503c0 100644 --- a/arch/x86/include/asm/fw_cfg.h +++ b/include/qemu_fw_cfg.h @@ -147,6 +147,11 @@ struct bios_linker_entry { */ void qemu_fwcfg_init(void); +void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address); +int qemu_fwcfg_read_firmware_list(void); +struct fw_file *qemu_fwcfg_find_file(const char *name); +void qemu_fwcfg_free_files(void); + /** * Get system cpu number *