From: Enric Balletbo i Serra Date: Sat, 25 Jan 2014 21:52:22 +0000 (+0100) Subject: OMAP3: igep00x0: Enable required clocks for GPIO that are used. X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=dd1e8583ee533a349c03ed4d75446898fe8dbac6;p=u-boot.git OMAP3: igep00x0: Enable required clocks for GPIO that are used. Enable required clocks for GPIO to fix a boot issue introduced by commit f33b9bd3984fb11e1d8566a866adc5957b1e1c9d (arm: omap3: Enable clocks for peripherals only if they are used). Without this patch the u-boot freezes after the following messages OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 Ghz IGEPv2 + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 Diving into the issue, the sequence that produces the u-boot freezes is setup_net_chip |--> gpio_direction_out |--> _set_gpio_dataout |--> __raw_writel To avoid this we just need enable the clocks for GPIOs that are used, but it would be interesting implement a mechanism to protect these situations and make sure that the clock is enabled when we request a GPIO. Signed-off-by: Enric Balletbo i Serra --- diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 20fbbecdfb..8cc23c1fb2 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -37,6 +37,11 @@ #define CONFIG_SHOW_BOOT_PROGRESS #endif +/* GPIO banks */ +#define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */ +#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */ +#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ + /* USB */ #define CONFIG_MUSB_UDC 1 #define CONFIG_USB_OMAP3 1