From: Lokesh Vutla Date: Wed, 5 Aug 2020 17:14:18 +0000 (+0530) Subject: arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=dc57a554a5af936f1127d2af03fa9281a6c1d4e1;p=u-boot.git arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image Starting J7200 SoC, ROM supports for loading sysfw directly from boot image. In such cases, SPL need not load sysfw from boot media, but need to receive boot notification message from sysfw. So separate out remoteproc calls for system controller from sysfw loader and just receive the boot notification if sysfw is already loaded. Signed-off-by: Lokesh Vutla Reviewed-by: Suman Anna --- diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c index e66d1c1fe1..603834e507 100644 --- a/arch/arm/mach-k3/am6_init.c +++ b/arch/arm/mach-k3/am6_init.c @@ -216,7 +216,7 @@ void board_init_f(ulong dummy) * Load, start up, and configure system controller firmware while * also populating the SYSFW post-PM configuration callback hook. */ - k3_sysfw_loader(k3_mmc_stop_clock, k3_mmc_restart_clock); + k3_sysfw_loader(false, k3_mmc_stop_clock, k3_mmc_restart_clock); /* Prepare console output */ preloader_console_init(); diff --git a/arch/arm/mach-k3/include/mach/sysfw-loader.h b/arch/arm/mach-k3/include/mach/sysfw-loader.h index 6f5612b4fd..b23a9e821e 100644 --- a/arch/arm/mach-k3/include/mach/sysfw-loader.h +++ b/arch/arm/mach-k3/include/mach/sysfw-loader.h @@ -7,6 +7,8 @@ #ifndef _SYSFW_LOADER_H_ #define _SYSFW_LOADER_H_ -void k3_sysfw_loader(void (*config_pm_pre_callback)(void), void (*config_pm_done_callback)(void)); +void k3_sysfw_loader(bool rom_loaded_sysfw, + void (*config_pm_pre_callback)(void), + void (*config_pm_done_callback)(void)); #endif diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c index 2010cab1d1..461a9d7f8f 100644 --- a/arch/arm/mach-k3/j721e_init.c +++ b/arch/arm/mach-k3/j721e_init.c @@ -174,7 +174,7 @@ void board_init_f(ulong dummy) * callback hook, effectively switching on (or over) the console * output. */ - k3_sysfw_loader(k3_mmc_stop_clock, k3_mmc_restart_clock); + k3_sysfw_loader(false, k3_mmc_stop_clock, k3_mmc_restart_clock); /* Prepare console output */ preloader_console_init(); diff --git a/arch/arm/mach-k3/sysfw-loader.c b/arch/arm/mach-k3/sysfw-loader.c index f4b0d4a928..78c158c63f 100644 --- a/arch/arm/mach-k3/sysfw-loader.c +++ b/arch/arm/mach-k3/sysfw-loader.c @@ -33,6 +33,12 @@ DECLARE_GLOBAL_DATA_PTR; #define SYSFW_CFG_RM "rm-cfg.bin" #define SYSFW_CFG_SEC "sec-cfg.bin" +/* + * It is assumed that remoteproc device 0 is the corresponding + * system-controller that runs SYSFW. Make sure DT reflects the same. + */ +#define K3_SYSTEM_CONTROLLER_RPROC_ID 0 + static bool sysfw_loaded; static void *sysfw_load_address; @@ -72,6 +78,26 @@ static int fit_get_data_by_name(const void *fit, int images, const char *name, return fit_image_get_data(fit, node_offset, addr, size); } +static void k3_start_system_controller(int rproc_id, bool rproc_loaded, + ulong addr, ulong size) +{ + int ret; + + ret = rproc_dev_init(rproc_id); + if (ret) + panic("rproc failed to be initialized (%d)\n", ret); + + if (!rproc_loaded) { + ret = rproc_load(rproc_id, addr, size); + if (ret) + panic("Firmware failed to start on rproc (%d)\n", ret); + } + + ret = rproc_start(0); + if (ret) + panic("Firmware init failed on rproc (%d)\n", ret); +} + static void k3_sysfw_load_using_fit(void *fit) { int images; @@ -91,23 +117,9 @@ static void k3_sysfw_load_using_fit(void *fit) panic("Error accessing %s node in FIT (%d)\n", SYSFW_FIRMWARE, ret); - /* - * Start up system controller firmware - * - * It is assumed that remoteproc device 0 is the corresponding - * system-controller that runs SYSFW. Make sure DT reflects the same. - */ - ret = rproc_dev_init(0); - if (ret) - panic("rproc failed to be initialized (%d)\n", ret); - - ret = rproc_load(0, (ulong)sysfw_addr, (ulong)sysfw_size); - if (ret) - panic("Firmware failed to start on rproc (%d)\n", ret); - - ret = rproc_start(0); - if (ret) - panic("Firmware init failed on rproc (%d)\n", ret); + /* Start up system controller firmware */ + k3_start_system_controller(K3_SYSTEM_CONTROLLER_RPROC_ID, false, + (ulong)sysfw_addr, (ulong)sysfw_size); } static void k3_sysfw_configure_using_fit(void *fit, @@ -223,7 +235,8 @@ static void *k3_sysfw_get_spi_addr(void) } #endif -void k3_sysfw_loader(void (*config_pm_pre_callback) (void), +void k3_sysfw_loader(bool rom_loaded_sysfw, + void (*config_pm_pre_callback)(void), void (*config_pm_done_callback)(void)) { struct spl_image_info spl_image = { 0 }; @@ -231,6 +244,13 @@ void k3_sysfw_loader(void (*config_pm_pre_callback) (void), struct ti_sci_handle *ti_sci; int ret = 0; + if (rom_loaded_sysfw) { + k3_start_system_controller(K3_SYSTEM_CONTROLLER_RPROC_ID, + rom_loaded_sysfw, 0, 0); + sysfw_loaded = true; + return; + } + /* Reserve a block of aligned memory for loading the SYSFW image */ sysfw_load_address = memalign(ARCH_DMA_MINALIGN, CONFIG_K3_SYSFW_IMAGE_SIZE_MAX);