From: mario.six@gdsys.cc Date: Tue, 17 Jan 2017 07:33:48 +0000 (+0100) Subject: powerpc: mpc83xx: Enable pre-relocation malloc X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=dbcb2c0e2ba28fc61ab03f57de14f1085e69834f;p=u-boot.git powerpc: mpc83xx: Enable pre-relocation malloc To enable DM on MPC83xx, we need pre-relocation malloc, which is implemented in this patch. Signed-off-by: Mario Six [York S: Fixed compiling warning for unused variable 'i'] Reviewed-by: York Sun --- diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index f911275b25..3a0916bdbf 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -205,8 +205,7 @@ void cpu_init_f (volatile immap_t * im) /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); - /* Clear initial global data */ - memset ((void *) gd, 0, sizeof (gd_t)); + /* global data region was cleared in start.S */ /* system performance tweaking */ clrsetbits_be32(&im->arbiter.acr, acr_mask, acr_val); diff --git a/arch/powerpc/cpu/mpc83xx/spl_minimal.c b/arch/powerpc/cpu/mpc83xx/spl_minimal.c index 845861eea7..1c65e4cb78 100644 --- a/arch/powerpc/cpu/mpc83xx/spl_minimal.c +++ b/arch/powerpc/cpu/mpc83xx/spl_minimal.c @@ -18,14 +18,10 @@ DECLARE_GLOBAL_DATA_PTR; */ void cpu_init_f (volatile immap_t * im) { - int i; - /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); - /* Clear initial global data */ - for (i = 0; i < sizeof(gd_t); i++) - ((char *)gd)[i] = 0; + /* global data region was cleared in start.S */ /* system performance tweaking */ diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index c366f615e7..ff312892bc 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -263,6 +263,29 @@ in_flash: lis r3, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l + /* r4 = end of GD area */ + addi r4, r3, GENERATED_GBL_DATA_SIZE + + /* Zero GD area */ + li r0, 0 +1: + subi r4, r4, 1 + stb r0, 0(r4) + cmplw r3, r4 + bne 1b + +#ifdef CONFIG_SYS_MALLOC_F_LEN + +#if CONFIG_SYS_MALLOC_F_LEN + GENERATED_GBL_DATA_SIZE > CONFIG_SYS_INIT_RAM_SIZE +#error "CONFIG_SYS_MALLOC_F_LEN too large to fit into initial RAM." +#endif + + /* r3 = new stack pointer / pre-reloc malloc area */ + subi r3, r3, CONFIG_SYS_MALLOC_F_LEN + + /* Set pointer to pre-reloc malloc area in GD */ + stw r3, GD_MALLOC_BASE(r4) +#endif li r0, 0 /* Make room for stack frame header and */ stwu r0, -4(r3) /* clear final stack frame so that */ stwu r0, -4(r3) /* stack backtraces terminate cleanly */