From: Tom Rini Date: Wed, 23 Mar 2022 21:20:00 +0000 (-0400) Subject: Convert CONFIG_LPUART et al to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=db48e5258432838bc215bdea9fb8e83017afe972;p=u-boot.git Convert CONFIG_LPUART et al to Kconfig This converts the following to Kconfig: CONFIG_LPUART CONFIG_LPUART_32B_REG And note that CONFIG_LPUART_32B_REG is unused in code. Signed-off-by: Tom Rini --- diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig index aedc12a469..7766f1244c 100644 --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig @@ -20,7 +20,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="LPUART" CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 CONFIG_SILENT_CONSOLE=y @@ -88,6 +87,7 @@ CONFIG_SYS_QE_FW_ADDR=0x60940000 CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y CONFIG_FSL_LPUART=y +CONFIG_LPUART=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig index 56e00a70b1..43f93f4324 100644 --- a/configs/ls1021aqds_nor_lpuart_defconfig +++ b/configs/ls1021aqds_nor_lpuart_defconfig @@ -20,7 +20,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="LPUART" CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 CONFIG_SILENT_CONSOLE=y @@ -89,6 +88,7 @@ CONFIG_SYS_QE_FW_ADDR=0x60940000 CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y CONFIG_FSL_LPUART=y +CONFIG_LPUART=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig index 5bb3175df4..973b499fc9 100644 --- a/configs/ls1021atwr_nor_lpuart_defconfig +++ b/configs/ls1021atwr_nor_lpuart_defconfig @@ -20,7 +20,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="LPUART" CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" @@ -76,6 +75,7 @@ CONFIG_SYS_QE_FW_ADDR=0x60940000 CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y CONFIG_FSL_LPUART=y +CONFIG_LPUART=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1028aqds_tfa_lpuart_defconfig b/configs/ls1028aqds_tfa_lpuart_defconfig index 1d0e303da2..0f4a33c66d 100644 --- a/configs/ls1028aqds_tfa_lpuart_defconfig +++ b/configs/ls1028aqds_tfa_lpuart_defconfig @@ -22,7 +22,6 @@ CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="LPUART" CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M" @@ -90,6 +89,7 @@ CONFIG_DM_SCSI=y CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_DM_SERIAL=y CONFIG_FSL_LPUART=y +CONFIG_LPUART=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig index d583573f17..105fc5a0d8 100644 --- a/configs/ls1043aqds_lpuart_defconfig +++ b/configs/ls1043aqds_lpuart_defconfig @@ -25,7 +25,6 @@ CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="LPUART" CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y @@ -92,6 +91,7 @@ CONFIG_SYS_QE_FMAN_FW_IN_NOR=y CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y CONFIG_FSL_LPUART=y +CONFIG_LPUART=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_USB=y diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig index 282cb43500..47636f10e2 100644 --- a/configs/ls1046aqds_lpuart_defconfig +++ b/configs/ls1046aqds_lpuart_defconfig @@ -25,7 +25,6 @@ CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="LPUART" CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y @@ -93,6 +92,7 @@ CONFIG_SYS_QE_FMAN_FW_IN_NOR=y CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y CONFIG_FSL_LPUART=y +CONFIG_LPUART=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 345d1881f5..610f8062c7 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -647,6 +647,10 @@ config FSL_LPUART Select this to enable a Low Power UART for Freescale VF610 and QorIQ Layerscape devices. +config LPUART + bool "Use the LPUART as console" + depends on FSL_LPUART + config MVEBU_A3700_UART bool "UART support for Armada 3700" help diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 6a27111465..773cc9bf20 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -268,9 +268,7 @@ /* * Serial Port */ -#ifdef CONFIG_LPUART -#define CONFIG_LPUART_32B_REG -#else +#ifndef CONFIG_LPUART #define CONFIG_SYS_NS16550_SERIAL #ifndef CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 03a4ce5199..b607dd37e2 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -165,9 +165,7 @@ /* * Serial Port */ -#ifdef CONFIG_LPUART -#define CONFIG_LPUART_32B_REG -#else +#ifndef CONFIG_LPUART #define CONFIG_SYS_NS16550_SERIAL #ifndef CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h index 1b4d181310..843cd59915 100644 --- a/include/configs/ls1028aqds.h +++ b/include/configs/ls1028aqds.h @@ -66,7 +66,6 @@ /* LPUART */ #ifdef CONFIG_LPUART -#define CONFIG_LPUART_32B_REG #define CFG_LPUART_MUX_MASK 0xf0 #define CFG_LPUART_EN 0xf0 #endif diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index e9919cd05f..bc02ac5ccb 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -39,11 +39,6 @@ #define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB #endif -/* LPUART */ -#ifdef CONFIG_LPUART -#define CONFIG_LPUART_32B_REG -#endif - /* SATA */ /* EEPROM */ diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 2972e3beac..ce68d3f929 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -54,7 +54,6 @@ /* LPUART */ #ifdef CONFIG_LPUART -#define CONFIG_LPUART_32B_REG #define CFG_UART_MUX_MASK 0x6 #define CFG_UART_MUX_SHIFT 1 #define CFG_LPUART_EN 0x2