From: Masahiro Yamada <yamada.masahiro@socionext.com>
Date: Mon, 26 Sep 2016 04:13:16 +0000 (+0900)
Subject: ARM: uniphier: do not setup pins for System Bus on NAND boot mode
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=dacdb2402742a0365ca543798a349182872131b4;p=u-boot.git

ARM: uniphier: do not setup pins for System Bus on NAND boot mode

For LD11 and LD20 SoCs, the System Bus and NAND are multiplexed
in the same I/O pins.  When booting from a NAND device, pin-mux
for the System Bus must not be set-up because they are exclusive
with each other.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

diff --git a/arch/arm/mach-uniphier/init/init-ld11.c b/arch/arm/mach-uniphier/init/init-ld11.c
index e324c94700..fdb2838503 100644
--- a/arch/arm/mach-uniphier/init/init-ld11.c
+++ b/arch/arm/mach-uniphier/init/init-ld11.c
@@ -15,7 +15,9 @@ int uniphier_ld11_init(const struct uniphier_board_data *bd)
 {
 	uniphier_sbc_init_savepin(bd);
 	uniphier_pxs2_sbc_init(bd);
-	uniphier_pin_init("system_bus_grp");
+	/* pins for NAND and System Bus are multiplexed */
+	if (spl_boot_device() != BOOT_DEVICE_NAND)
+		uniphier_pin_init("system_bus_grp");
 
 	support_card_reset();
 
diff --git a/arch/arm/mach-uniphier/init/init-ld20.c b/arch/arm/mach-uniphier/init/init-ld20.c
index cb05421252..37b860a8b4 100644
--- a/arch/arm/mach-uniphier/init/init-ld20.c
+++ b/arch/arm/mach-uniphier/init/init-ld20.c
@@ -15,7 +15,9 @@ int uniphier_ld20_init(const struct uniphier_board_data *bd)
 {
 	uniphier_sbc_init_savepin(bd);
 	uniphier_pxs2_sbc_init(bd);
-	uniphier_pin_init("system_bus_grp");
+	/* pins for NAND and System Bus are multiplexed */
+	if (spl_boot_device() != BOOT_DEVICE_NAND)
+		uniphier_pin_init("system_bus_grp");
 
 	support_card_reset();