From: Andy Fleming Date: Tue, 14 Aug 2007 05:14:25 +0000 (-0500) Subject: Add support for UEC to 8568 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=da9d4610d76e52c4d20a8f3d8433439a7fcf5b71;p=u-boot.git Add support for UEC to 8568 Signed-off-by: Haiying Wang Signed-off-by: Andy Fleming --- diff --git a/Makefile b/Makefile index f51688961b..a5698cf7c9 100644 --- a/Makefile +++ b/Makefile @@ -212,6 +212,9 @@ LIBS += drivers/nand_legacy/libnand_legacy.a ifeq ($(CPU),mpc83xx) LIBS += drivers/qe/qe.a endif +ifeq ($(CPU),mpc85xx) +LIBS += drivers/qe/qe.a +endif LIBS += drivers/sk98lin/libsk98lin.a LIBS += post/libpost.a post/drivers/libpostdrivers.a LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \ diff --git a/board/mpc8568mds/bcsr.c b/board/mpc8568mds/bcsr.c index 2e2e8cd18f..aae0f98e03 100644 --- a/board/mpc8568mds/bcsr.c +++ b/board/mpc8568mds/bcsr.c @@ -47,3 +47,10 @@ void disable_8568mds_flash_write() bcsr[9] &= ~(0x01); } + +void enable_8568mds_qe_mdio() +{ + u8 *bcsr = (u8 *)(CFG_BCSR); + + bcsr[7] |= 0x01; +} diff --git a/board/mpc8568mds/bcsr.h b/board/mpc8568mds/bcsr.h index 8d4cb2f141..aefd9bf54d 100644 --- a/board/mpc8568mds/bcsr.h +++ b/board/mpc8568mds/bcsr.h @@ -95,5 +95,6 @@ void enable_8568mds_duart(void); void enable_8568mds_flash_write(void); void disable_8568mds_flash_write(void); +void enable_8568mds_qe_mdio(void); #endif /* __BCSR_H_ */ diff --git a/board/mpc8568mds/mpc8568mds.c b/board/mpc8568mds/mpc8568mds.c index 23caaec72f..818ff138a9 100644 --- a/board/mpc8568mds/mpc8568mds.c +++ b/board/mpc8568mds/mpc8568mds.c @@ -28,9 +28,65 @@ #include #include #include +#include #include "bcsr.h" +const qe_iop_conf_t qe_iop_conf_tab[] = { + /* GETH1 */ + {4, 10, 1, 0, 2}, /* TxD0 */ + {4, 9, 1, 0, 2}, /* TxD1 */ + {4, 8, 1, 0, 2}, /* TxD2 */ + {4, 7, 1, 0, 2}, /* TxD3 */ + {4, 23, 1, 0, 2}, /* TxD4 */ + {4, 22, 1, 0, 2}, /* TxD5 */ + {4, 21, 1, 0, 2}, /* TxD6 */ + {4, 20, 1, 0, 2}, /* TxD7 */ + {4, 15, 2, 0, 2}, /* RxD0 */ + {4, 14, 2, 0, 2}, /* RxD1 */ + {4, 13, 2, 0, 2}, /* RxD2 */ + {4, 12, 2, 0, 2}, /* RxD3 */ + {4, 29, 2, 0, 2}, /* RxD4 */ + {4, 28, 2, 0, 2}, /* RxD5 */ + {4, 27, 2, 0, 2}, /* RxD6 */ + {4, 26, 2, 0, 2}, /* RxD7 */ + {4, 11, 1, 0, 2}, /* TX_EN */ + {4, 24, 1, 0, 2}, /* TX_ER */ + {4, 16, 2, 0, 2}, /* RX_DV */ + {4, 30, 2, 0, 2}, /* RX_ER */ + {4, 17, 2, 0, 2}, /* RX_CLK */ + {4, 19, 1, 0, 2}, /* GTX_CLK */ + {1, 31, 2, 0, 3}, /* GTX125 */ + + /* GETH2 */ + {5, 10, 1, 0, 2}, /* TxD0 */ + {5, 9, 1, 0, 2}, /* TxD1 */ + {5, 8, 1, 0, 2}, /* TxD2 */ + {5, 7, 1, 0, 2}, /* TxD3 */ + {5, 23, 1, 0, 2}, /* TxD4 */ + {5, 22, 1, 0, 2}, /* TxD5 */ + {5, 21, 1, 0, 2}, /* TxD6 */ + {5, 20, 1, 0, 2}, /* TxD7 */ + {5, 15, 2, 0, 2}, /* RxD0 */ + {5, 14, 2, 0, 2}, /* RxD1 */ + {5, 13, 2, 0, 2}, /* RxD2 */ + {5, 12, 2, 0, 2}, /* RxD3 */ + {5, 29, 2, 0, 2}, /* RxD4 */ + {5, 28, 2, 0, 2}, /* RxD5 */ + {5, 27, 2, 0, 3}, /* RxD6 */ + {5, 26, 2, 0, 2}, /* RxD7 */ + {5, 11, 1, 0, 2}, /* TX_EN */ + {5, 24, 1, 0, 2}, /* TX_ER */ + {5, 16, 2, 0, 2}, /* RX_DV */ + {5, 30, 2, 0, 2}, /* RX_ER */ + {5, 17, 2, 0, 2}, /* RX_CLK */ + {5, 19, 1, 0, 2}, /* GTX_CLK */ + {1, 31, 2, 0, 3}, /* GTX125 */ + {4, 6, 3, 0, 2}, /* MDIO */ + {4, 5, 1, 0, 2}, /* MDC */ + {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ +}; + #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) extern void ddr_enable_ecc(unsigned int dram_size); @@ -50,6 +106,9 @@ int board_early_init_f (void) enable_8568mds_duart(); enable_8568mds_flash_write(); +#if defined(CONFIG_QE) && !defined(CONFIG_eTSEC_MDIO_BUS) + enable_8568mds_qe_mdio(); +#endif #ifdef CFG_I2C2_OFFSET /* Enable I2C2_SCL and I2C2_SDA */ @@ -335,6 +394,6 @@ pci_init_board(void) { #ifdef CONFIG_PCI pib_init(); - pci_mpc85xx_init(&hose); + pci_mpc85xx_init(hose); #endif } diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile index ff67dcdd35..32091fa4e1 100644 --- a/cpu/mpc85xx/Makefile +++ b/cpu/mpc85xx/Makefile @@ -30,7 +30,7 @@ LIB = $(obj)lib$(CPU).a START = start.o resetvec.o COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \ - pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o + pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o qe_io.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 1d791c9b9b..08e04685f5 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -280,7 +280,7 @@ ft_cpu_setup(void *blob, bd_t *bd) if (p != NULL) *p = cpu_to_be32(clock); -#if defined(CONFIG_TSEC1) +#if defined(CONFIG_HAS_ETH0) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len); if (p) memcpy(p, bd->bi_enetaddr, 6); @@ -308,6 +308,17 @@ ft_cpu_setup(void *blob, bd_t *bd) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len); if (p) memcpy(p, bd->bi_enet2addr, 6); + +#ifdef CONFIG_UEC_ETH + p = ft_get_prop(blob, "/" OF_QE "/ucc@2000/mac-address", &len); + if (p) + memcpy(p, bd->bi_enet2addr, 6); + + p = ft_get_prop(blob, "/" OF_QE "/ucc@2000/local-mac-address", &len); + if (p) + memcpy(p, bd->bi_enet2addr, 6); + +#endif #endif #if defined(CONFIG_HAS_ETH3) @@ -318,6 +329,17 @@ ft_cpu_setup(void *blob, bd_t *bd) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len); if (p) memcpy(p, bd->bi_enet3addr, 6); + +#ifdef CONFIG_UEC_ETH + p = ft_get_prop(blob, "/" OF_QE "/ucc@3000/mac-address", &len); + if (p) + memcpy(p, bd->bi_enet3addr, 6); + + p = ft_get_prop(blob, "/" OF_QE "/ucc@3000/local-mac-address", &len); + if (p) + memcpy(p, bd->bi_enet3addr, 6); + +#endif #endif } diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c index c7fe130ee0..7b9961013c 100644 --- a/cpu/mpc85xx/cpu_init.c +++ b/cpu/mpc85xx/cpu_init.c @@ -34,6 +34,29 @@ DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_QE +extern qe_iop_conf_t qe_iop_conf_tab[]; +extern void qe_config_iopin(u8 port, u8 pin, int dir, + int open_drain, int assign); +extern void qe_init(uint qe_base); +extern void qe_reset(void); + +static void config_qe_ioports(void) +{ + u8 port, pin; + int dir, open_drain, assign; + int i; + + for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) { + port = qe_iop_conf_tab[i].port; + pin = qe_iop_conf_tab[i].pin; + dir = qe_iop_conf_tab[i].dir; + open_drain = qe_iop_conf_tab[i].open_drain; + assign = qe_iop_conf_tab[i].assign; + qe_config_iopin(port, pin, dir, open_drain, assign); + } +} +#endif #ifdef CONFIG_CPM2 static void config_8560_ioports (volatile immap_t * immr) @@ -181,6 +204,11 @@ void cpu_init_f (void) #if defined(CONFIG_CPM2) m8560_cpm_reset(); #endif +#ifdef CONFIG_QE + /* Config QE ioports */ + config_qe_ioports(); +#endif + } @@ -262,6 +290,11 @@ int cpu_init_r(void) #else printf("L2 cache: disabled\n"); #endif +#ifdef CONFIG_QE + uint qe_base = CFG_IMMR + 0x00080000; /* QE immr base */ + qe_init(qe_base); + qe_reset(); +#endif return 0; } diff --git a/cpu/mpc85xx/qe_io.c b/cpu/mpc85xx/qe_io.c new file mode 100644 index 0000000000..8878bc5319 --- /dev/null +++ b/cpu/mpc85xx/qe_io.c @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Dave Liu + * based on source code of Shlomi Gridish + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include "common.h" +#include "asm/errno.h" +#include "asm/io.h" +#include "asm/immap_85xx.h" + +#if defined(CONFIG_QE) +#define NUM_OF_PINS 32 +void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign) +{ + u32 pin_2bit_mask; + u32 pin_2bit_dir; + u32 pin_2bit_assign; + u32 pin_1bit_mask; + u32 tmp_val; + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + volatile par_io_t *par_io = (volatile par_io_t *) + &(im->im_gur.qe_par_io); + + /* Caculate pin location and 2bit mask and dir */ + pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2)); + pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2)); + + /* Setup the direction */ + tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \ + in_be32(&par_io[port].cpdir2) : + in_be32(&par_io[port].cpdir1); + + if (pin > (NUM_OF_PINS/2) -1) { + out_be32(&par_io[port].cpdir2, ~pin_2bit_mask & tmp_val); + out_be32(&par_io[port].cpdir2, pin_2bit_dir | tmp_val); + } else { + out_be32(&par_io[port].cpdir1, ~pin_2bit_mask & tmp_val); + out_be32(&par_io[port].cpdir1, pin_2bit_dir | tmp_val); + } + + /* Calculate pin location for 1bit mask */ + pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1))); + + /* Setup the open drain */ + tmp_val = in_be32(&par_io[port].cpodr); + if (open_drain) + out_be32(&par_io[port].cpodr, pin_1bit_mask | tmp_val); + else + out_be32(&par_io[port].cpodr, ~pin_1bit_mask & tmp_val); + + /* Setup the assignment */ + tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? + in_be32(&par_io[port].cppar2): + in_be32(&par_io[port].cppar1); + pin_2bit_assign = (u32)(assign + << (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2)); + + /* Clear and set 2 bits mask */ + if (pin > (NUM_OF_PINS/2) - 1) { + out_be32(&par_io[port].cppar2, ~pin_2bit_mask & tmp_val); + out_be32(&par_io[port].cppar2, pin_2bit_assign | tmp_val); + } else { + out_be32(&par_io[port].cppar1, ~pin_2bit_mask & tmp_val); + out_be32(&par_io[port].cppar1, pin_2bit_assign | tmp_val); + } +} + +#endif /* CONFIG_QE */ diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c index c416a67c83..89a7279823 100644 --- a/drivers/qe/uec.c +++ b/drivers/qe/uec.c @@ -391,17 +391,17 @@ static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode) return 0; } -static int init_mii_management_configuration(uec_t *uec_regs) +static int init_mii_management_configuration(uec_mii_t *uec_mii_regs) { uint timeout = 0x1000; u32 miimcfg = 0; - miimcfg = in_be32(&uec_regs->miimcfg); + miimcfg = in_be32(&uec_mii_regs->miimcfg); miimcfg |= MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE; - out_be32(&uec_regs->miimcfg, miimcfg); + out_be32(&uec_mii_regs->miimcfg, miimcfg); /* Wait until the bus is free */ - while ((in_be32(&uec_regs->miimcfg) & MIIMIND_BUSY) && timeout--); + while ((in_be32(&uec_mii_regs->miimcfg) & MIIMIND_BUSY) && timeout--); if (timeout <= 0) { printf("%s: The MII Bus is stuck!", __FUNCTION__); return -ETIMEDOUT; @@ -413,13 +413,13 @@ static int init_mii_management_configuration(uec_t *uec_regs) static int init_phy(struct eth_device *dev) { uec_private_t *uec; - uec_t *uec_regs; + uec_mii_t *umii_regs; struct uec_mii_info *mii_info; struct phy_info *curphy; int err; uec = (uec_private_t *)dev->priv; - uec_regs = uec->uec_regs; + umii_regs = uec->uec_mii_regs; uec->oldlink = 0; uec->oldspeed = 0; @@ -451,19 +451,19 @@ static int init_phy(struct eth_device *dev) mii_info->mii_id = uec->uec_info->phy_address; mii_info->dev = dev; - mii_info->mdio_read = &read_phy_reg; - mii_info->mdio_write = &write_phy_reg; + mii_info->mdio_read = &uec_read_phy_reg; + mii_info->mdio_write = &uec_write_phy_reg; uec->mii_info = mii_info; - if (init_mii_management_configuration(uec_regs)) { + if (init_mii_management_configuration(umii_regs)) { printf("%s: The MII Bus is stuck!", dev->name); err = -1; goto bus_fail; } /* get info for this PHY */ - curphy = get_phy_info(uec->mii_info); + curphy = uec_get_phy_info(uec->mii_info); if (!curphy) { printf("%s: No PHY found", dev->name); err = -1; @@ -989,6 +989,13 @@ static int uec_startup(uec_private_t *uec) /* Setup MAC interface mode */ uec_set_mac_if_mode(uec, uec_info->enet_interface); + /* Setup MII management base */ +#ifndef CONFIG_eTSEC_MDIO_BUS + uec->uec_mii_regs = (uec_mii_t *)(&uec_regs->miimcfg); +#else + uec->uec_mii_regs = (uec_mii_t *) CONFIG_MIIM_ADDRESS; +#endif + /* Setup MII master clock source */ qe_set_mii_clk_src(uec_info->uf_info.ucc_num); diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h index 04950264b8..c384055ceb 100644 --- a/drivers/qe/uec.h +++ b/drivers/qe/uec.h @@ -675,6 +675,7 @@ typedef struct uec_private { ucc_fast_private_t *uccf; struct eth_device *dev; uec_t *uec_regs; + uec_mii_t *uec_mii_regs; /* enet init command parameter */ uec_init_cmd_pram_t *p_init_enet_param; u32 init_enet_param_offset; diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index 76fd38896a..ca6faa6ef4 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -60,14 +60,14 @@ void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val); /* Write value to the PHY for this device to the register at regnum, */ /* waiting until the write is done before it returns. All PHY */ /* configuration has to be done through the TSEC1 MIIM regs */ -void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value) +void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value) { uec_private_t *ugeth = (uec_private_t *) dev->priv; - uec_t *ug_regs; + uec_mii_t *ug_regs; enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum; u32 tmp_reg; - ug_regs = ugeth->uec_regs; + ug_regs = ugeth->uec_mii_regs; /* Stop the MII management read cycle */ out_be32 (&ug_regs->miimcom, 0); @@ -87,15 +87,15 @@ void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value) /* Reads from register regnum in the PHY for device dev, */ /* returning the value. Clears miimcom first. All PHY */ /* configuration has to be done through the TSEC1 MIIM regs */ -int read_phy_reg (struct eth_device *dev, int mii_id, int regnum) +int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum) { uec_private_t *ugeth = (uec_private_t *) dev->priv; - uec_t *ug_regs; + uec_mii_t *ug_regs; enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum; u32 tmp_reg; u16 value; - ug_regs = ugeth->uec_regs; + ug_regs = ugeth->uec_mii_regs; /* Setting up the MII Mangement Address Register */ tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; @@ -521,7 +521,7 @@ void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val) /* Use the PHY ID registers to determine what type of PHY is attached * to device dev. return a struct phy_info structure describing that PHY */ -struct phy_info *get_phy_info (struct uec_mii_info *mii_info) +struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info) { u16 phy_reg; u32 phy_ID; diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h index 9bd926ddd5..e59a940e0d 100644 --- a/drivers/qe/uec_phy.h +++ b/drivers/qe/uec_phy.h @@ -249,10 +249,10 @@ struct phy_info { void (*close) (struct uec_mii_info * mii_info); }; -struct phy_info *get_phy_info (struct uec_mii_info *mii_info); -void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, +struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info); +void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value); -int read_phy_reg (struct eth_device *dev, int mii_id, int regnum); +int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum); void mii_clear_phy_interrupt (struct uec_mii_info *mii_info); void mii_configure_phy_interrupt (struct uec_mii_info *mii_info, u32 interrupts); diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index bbaeb3f575..1f1583a923 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -71,16 +71,16 @@ typedef struct global_data { u32 lclk_clk; u32 ddr_clk; u32 pci_clk; +#if defined(CONFIG_MPC8360) + u32 ddr_sec_clk; +#endif /* CONFIG_MPC8360 */ +#endif #if defined(CONFIG_QE) u32 qe_clk; u32 brg_clk; uint mp_alloc_base; uint mp_alloc_top; #endif /* CONFIG_QE */ -#if defined (CONFIG_MPC8360) - u32 ddr_sec_clk; -#endif /* CONFIG_MPC8360 */ -#endif #if defined(CONFIG_MPC5xxx) unsigned long ipb_clk; unsigned long pci_clk; diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h index 950b9497f8..a16a6d3fc5 100644 --- a/include/asm-ppc/immap_qe.h +++ b/include/asm-ppc/immap_qe.h @@ -281,6 +281,17 @@ typedef struct ucc_slow { u8 res4[0x200 - 0x091]; } __attribute__ ((packed)) ucc_slow_t; +typedef struct ucc_mii_mng { + u32 miimcfg; /* MII management configuration reg */ + u32 miimcom; /* MII management command reg */ + u32 miimadd; /* MII management address reg */ + u32 miimcon; /* MII management control reg */ + u32 miimstat; /* MII management status reg */ + u32 miimind; /* MII management indication reg */ + u32 ifctl; /* interface control reg */ + u32 ifstat; /* interface statux reg */ +} __attribute__ ((packed))uec_mii_t; + typedef struct ucc_ethernet { u32 maccfg1; /* mac configuration reg. 1 */ u32 maccfg2; /* mac configuration reg. 2 */ @@ -540,14 +551,21 @@ typedef struct qe_immap { u8 res14[0x300]; u8 res15[0x3A00]; u8 res16[0x8000]; /* 0x108000 - 0x110000 */ +#if defined(CONFIG_MPC8568) + u8 muram[0x10000]; /* 0x1_0000 - 0x2_0000 Multi-user RAM */ + u8 res17[0x20000]; /* 0x2_0000 - 0x4_0000 */ +#else u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */ u8 res17[0x24000]; /* 0x11C000 - 0x140000 */ u8 res18[0xC0000]; /* 0x140000 - 0x200000 */ +#endif } __attribute__ ((packed)) qe_map_t; extern qe_map_t *qe_immr; -#if defined(CONFIG_MPC8360) +#if defined(CONFIG_MPC8568) +#define QE_MURAM_SIZE 0x10000UL +#elif defined(CONFIG_MPC8360) #define QE_MURAM_SIZE 0xc000UL #elif defined(CONFIG_MPC832X) #define QE_MURAM_SIZE 0x4000UL diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 5bc953adc4..dc9cb1ff54 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -28,20 +28,21 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ +#define CONFIG_E500 1 /* BOOKE e500 family */ #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */ #define CONFIG_MPC8568 1 /* MPC8568 specific */ #define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */ #define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ +#undef CONFIG_QE /* Enable QE */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_DLL /* possible DLL fix needed */ /*#define CONFIG_DDR_2T_TIMING Sets the 2T timing bit */ /*#define CONFIG_DDR_ECC*/ /* only for ECC DDR module */ -/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/ /* DDR controller or DMA? */ +/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/ /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef @@ -297,6 +298,7 @@ extern unsigned long get_clock_freq(void); #define OF_CPU "PowerPC,8568@0" #define OF_SOC "soc8568@e0000000" +#define OF_QE "qe@e0080000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8568@e0000000/serial@4600" @@ -311,7 +313,7 @@ extern unsigned long get_clock_freq(void); #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_EEPROM_ADDR 0x52 #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0,0x69} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 @@ -340,6 +342,44 @@ extern unsigned long get_clock_freq(void); #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ +#ifdef CONFIG_QE +/* + * QE UEC ethernet configuration + */ +#define CONFIG_UEC_ETH +#ifndef CONFIG_TSEC_ENET +#define CONFIG_ETHPRIME "Freescale GETH" +#endif +#define CONFIG_PHY_MODE_NEED_CHANGE +#define CONFIG_eTSEC_MDIO_BUS + +#ifdef CONFIG_eTSEC_MDIO_BUS +#define CONFIG_MIIM_ADDRESS 0xE0024520 +#endif + +#define CONFIG_UEC_ETH1 /* GETH1 */ + +#ifdef CONFIG_UEC_ETH1 +#define CFG_UEC1_UCC_NUM 0 /* UCC1 */ +#define CFG_UEC1_RX_CLK QE_CLK_NONE +#define CFG_UEC1_TX_CLK QE_CLK16 +#define CFG_UEC1_ETH_TYPE GIGA_ETH +#define CFG_UEC1_PHY_ADDR 7 +#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII +#endif + +#define CONFIG_UEC_ETH2 /* GETH2 */ + +#ifdef CONFIG_UEC_ETH2 +#define CFG_UEC2_UCC_NUM 1 /* UCC2 */ +#define CFG_UEC2_RX_CLK QE_CLK_NONE +#define CFG_UEC2_TX_CLK QE_CLK16 +#define CFG_UEC2_ETH_TYPE GIGA_ETH +#define CFG_UEC2_PHY_ADDR 1 +#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII +#endif +#endif /* CONFIG_QE */ + #undef CONFIG_EEPRO100 #undef CONFIG_TULIP @@ -348,13 +388,12 @@ extern unsigned long get_clock_freq(void); #endif /* CONFIG_PCI */ - -#if defined(CONFIG_TSEC_ENET) - #ifndef CONFIG_NET_MULTI #define CONFIG_NET_MULTI 1 #endif +#if defined(CONFIG_TSEC_ENET) + #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_TSEC1 1 #define CONFIG_TSEC1_NAME "eTSEC0" @@ -460,12 +499,15 @@ extern unsigned long get_clock_freq(void); */ /* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) +#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_UEC_ETH) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD +#define CONFIG_HAS_ETH3 +#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif #define CONFIG_IPADDR 192.168.1.253