From: York Sun Date: Wed, 13 Aug 2014 17:21:05 +0000 (-0700) Subject: ARMv8/ls2085a_emu: Enable DP-DDR as standalone memory block X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d9c68b1444acb383684636eb856fd7e4cec04129;p=u-boot.git ARMv8/ls2085a_emu: Enable DP-DDR as standalone memory block DP-DDR is used for DPAA, separated from main memory pool for general use. It has 32-bit bus width and use a standard DDR4 DIMM (64-bit). Signed-off-by: York Sun --- diff --git a/arch/arm/include/asm/arch-fsl-lsch3/config.h b/arch/arm/include/asm/arch-fsl-lsch3/config.h index b17410a58a..f632c82896 100644 --- a/arch/arm/include/asm/arch-fsl-lsch3/config.h +++ b/arch/arm/include/asm/arch-fsl-lsch3/config.h @@ -16,6 +16,7 @@ #define CONFIG_SYS_IMMR 0x01000000 #define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000) #define CONFIG_SYS_FSL_DDR2_ADDR (CONFIG_SYS_IMMR + 0x00090000) +#define CONFIG_SYS_FSL_DDR3_ADDR 0x08210000 #define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00E00000) #define CONFIG_SYS_FSL_PMU_ADDR (CONFIG_SYS_IMMR + 0x00E30000) #define CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR (CONFIG_SYS_IMMR + 0x00300000) @@ -60,7 +61,7 @@ #ifdef CONFIG_LS2085A #define CONFIG_MAX_CPUS 16 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 -#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_NUM_DDR_CONTROLLERS 3 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 4, 4 } #else #error SoC not defined diff --git a/board/freescale/ls2085a/ddr.c b/board/freescale/ls2085a/ddr.c index 257bc162d0..b4a3fc9a9e 100644 --- a/board/freescale/ls2085a/ddr.c +++ b/board/freescale/ls2085a/ddr.c @@ -30,9 +30,9 @@ void fsl_ddr_board_options(memctl_options_t *popts, * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num]; */ if (popts->registered_dimm_en) - pbsp = rdimms[0]; + pbsp = rdimms[ctrl_num]; else - pbsp = udimms[0]; + pbsp = udimms[ctrl_num]; /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr @@ -72,6 +72,12 @@ found: pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, pbsp->wrlvl_ctl_3); + if (ctrl_num == CONFIG_DP_DDR_CTRL) { + /* force DDR bus width to 32 bits */ + popts->data_bus_width = 1; + popts->otf_burst_chop_en = 0; + popts->burst_length = DDR_BL8; + } /* * Factors to consider for half-strength driver enable: * - number of DIMMs installed @@ -163,6 +169,10 @@ phys_size_t initdram(int board_type) void dram_init_banksize(void) { +#ifdef CONFIG_SYS_DP_DDR_BASE_PHY + phys_size_t dp_ddr_size; +#endif + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) { gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; @@ -172,4 +182,24 @@ void dram_init_banksize(void) } else { gd->bd->bi_dram[0].size = gd->ram_size; } + +#ifdef CONFIG_SYS_DP_DDR_BASE_PHY + /* initialize DP-DDR here */ + puts("DP-DDR: "); + /* + * DDR controller use 0 as the base address for binding. + * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access. + */ + dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY, + CONFIG_DP_DDR_CTRL, + CONFIG_DP_DDR_NUM_CTRLS, + CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR, + NULL, NULL, NULL); + if (dp_ddr_size) { + gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE; + gd->bd->bi_dram[2].size = dp_ddr_size; + } else { + puts("Not detected"); + } +#endif } diff --git a/board/freescale/ls2085a/ddr.h b/board/freescale/ls2085a/ddr.h index 77f6aafe3d..9958a68e3e 100644 --- a/board/freescale/ls2085a/ddr.h +++ b/board/freescale/ls2085a/ddr.h @@ -33,6 +33,18 @@ static const struct board_specific_parameters udimm0[] = { {} }; +/* DP-DDR DIMM */ +static const struct board_specific_parameters udimm2[] = { + /* + * memory controller 2 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ + {2, 2140, 0, 4, 4, 0x0, 0x0}, + {1, 2140, 0, 4, 4, 0x0, 0x0}, + {} +}; + static const struct board_specific_parameters rdimm0[] = { /* * memory controller 0 @@ -45,12 +57,29 @@ static const struct board_specific_parameters rdimm0[] = { {} }; +/* DP-DDR DIMM */ +static const struct board_specific_parameters rdimm2[] = { + /* + * memory controller 2 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ + {4, 2140, 0, 5, 4, 0x0, 0x0}, + {2, 2140, 0, 5, 4, 0x0, 0x0}, + {1, 2140, 0, 4, 4, 0x0, 0x0}, + {} +}; + static const struct board_specific_parameters *udimms[] = { udimm0, + udimm0, + udimm2, }; static const struct board_specific_parameters *rdimms[] = { rdimm0, + rdimm0, + rdimm2, }; diff --git a/board/freescale/ls2085a/ls2085a.c b/board/freescale/ls2085a/ls2085a.c index d19f692e07..c2a726b76e 100644 --- a/board/freescale/ls2085a/ls2085a.c +++ b/board/freescale/ls2085a/ls2085a.c @@ -35,9 +35,20 @@ int board_early_init_f(void) return 0; } +void detail_board_ddr_info(void) +{ + puts("\nDDR "); + print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, ""); + print_ddr_info(0); + if (gd->bd->bi_dram[2].size) { + puts("\nDP-DDR "); + print_size(gd->bd->bi_dram[2].size, ""); + print_ddr_info(CONFIG_DP_DDR_CTRL); + } +} + int dram_init(void) { - printf("DRAM: "); gd->ram_size = initdram(0); return 0; diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index 6355e4a6b0..5ac7623f76 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -54,6 +54,18 @@ #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL +#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 2 + +#define CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS +#define CONFIG_SYS_DP_DDR_BASE 0x6000000000ULL +/* + * DDR controller use 0 as the base address for binding. + * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access. + */ +#define CONFIG_SYS_DP_DDR_BASE_PHY 0 +#define CONFIG_DP_DDR_CTRL 2 +#define CONFIG_DP_DDR_NUM_CTRLS 1 +#define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1 /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 12000000 /* 12MHz */ @@ -236,7 +248,7 @@ #define CONFIG_SYS_CLK_FREQ 133333333 -#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_NR_DRAM_BANKS 3 #define CONFIG_SYS_HZ 1000 diff --git a/include/configs/ls2085a_emu.h b/include/configs/ls2085a_emu.h index a5cea63b33..487cd99c5d 100644 --- a/include/configs/ls2085a_emu.h +++ b/include/configs/ls2085a_emu.h @@ -13,6 +13,7 @@ #define CONFIG_SYS_FSL_DDR_EMU /* Support emulator */ #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS3 0x53 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 #define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD on I2C bus 1 */