From: Enrico Leto Date: Wed, 24 Jan 2024 14:43:53 +0000 (+0100) Subject: siemens: board: clean up products folders vs common X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d89a97ef9403f79b98853e2a9ddfa36733c1a6e8;p=u-boot.git siemens: board: clean up products folders vs common The common folder was initialially created for the common parts of the products based on draco-am355x board family. These are the product lines 'pxm2', 'rut' and the base line named 'draco'! Adding the new capricorn-imx8 board family, common was enhanced without cleanup. - rename 'common/board.c' to 'common/board_am335x.c' - add 'common/board_am335x.h' for export to the product lines Reviewed-by: Alexander Sverdlin Signed-off-by: Enrico Leto --- diff --git a/board/siemens/common/board.c b/board/siemens/common/board_am335x.c similarity index 98% rename from board/siemens/common/board.c rename to board/siemens/common/board_am335x.c index e5a42d734b..c55ca983bd 100644 --- a/board/siemens/common/board.c +++ b/board/siemens/common/board_am335x.c @@ -33,6 +33,7 @@ #include #include #include +#include "board_am335x.h" #include "eeprom.h" #include "factoryset.h" @@ -56,7 +57,7 @@ void set_mux_conf_regs(void) gd->have_console = 1; siemens_ee_setup(); - if (read_eeprom() < 0) + if (draco_read_eeprom() < 0) puts("Could not get board ID.\n"); enable_board_pin_mux(); @@ -64,8 +65,8 @@ void set_mux_conf_regs(void) void sdram_init(void) { - spl_siemens_board_init(); - board_init_ddr(); + spl_draco_board_init(); + draco_init_ddr(); return; } diff --git a/board/siemens/common/board_am335x.h b/board/siemens/common/board_am335x.h new file mode 100644 index 0000000000..3a20352d45 --- /dev/null +++ b/board/siemens/common/board_am335x.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Board definitions for draco products + * + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * TI AM335x boards information header + * u-boot:/board/ti/am335x/board.h + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + */ + +#ifndef _BOARD_AM335X_H_ +#define _BOARD_AM335X_H_ + +#include "eeprom.h" + +/* Common functions with product specific implementation */ +void spl_draco_board_init(void); +void draco_init_ddr(void); +int draco_read_eeprom(void); + +#ifdef CONFIG_SPL_BUILD +/* Mux for init: uart?, i2c0 to read the main EEPROM */ +void enable_uart0_pin_mux(void); +void enable_uart1_pin_mux(void); +void enable_uart2_pin_mux(void); +void enable_uart3_pin_mux(void); +void enable_uart4_pin_mux(void); +void enable_uart5_pin_mux(void); +void enable_i2c0_pin_mux(void); + +/* Main mux function to enable other pinmux required on the board */ +void enable_board_pin_mux(void); +#endif /* CONFIG_SPL_BUILD */ + +#endif /* _BOARD_AM335X_H_ */ diff --git a/board/siemens/draco/Makefile b/board/siemens/draco/Makefile index 1d0cb82bcb..aae536472c 100644 --- a/board/siemens/draco/Makefile +++ b/board/siemens/draco/Makefile @@ -14,6 +14,7 @@ obj-y := mux.o endif obj-y += board.o +obj-y += ../common/board_am335x.o obj-y += ../common/eeprom.o ifndef CONFIG_SPL_BUILD obj-y += ../common/factoryset.o diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c index d108d3e49d..2412a04a9a 100644 --- a/board/siemens/draco/board.c +++ b/board/siemens/draco/board.c @@ -159,7 +159,7 @@ static int draco_read_nand_geometry(void) /* * Read header information from EEPROM into global structure. */ -static int read_eeprom(void) +int draco_read_eeprom(void) { /* Read Siemens eeprom data (DDR3) */ if (siemens_ee_read_data(SIEMENS_EE_ADDR_DDR3, (uchar *)&settings.ddr3, @@ -195,7 +195,7 @@ static int read_eeprom(void) return draco_read_nand_geometry(); } -static void board_init_ddr(void) +void draco_init_ddr(void) { struct emif_regs draco_ddr3_emif_reg_data = { .zq_config = 0x50074BE4, @@ -242,7 +242,7 @@ struct ctrl_ioregs draco_ddr3_ioregs = { &draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0); } -static void spl_siemens_board_init(void) +void spl_draco_board_init(void) { return; } @@ -357,5 +357,3 @@ U_BOOT_CMD( ); #endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */ #endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */ - -#include "../common/board.c" diff --git a/board/siemens/draco/board.h b/board/siemens/draco/board.h index f027427d1f..935f340a8f 100644 --- a/board/siemens/draco/board.h +++ b/board/siemens/draco/board.h @@ -1,19 +1,15 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * board.h + * Board definitions for draco products * * (C) Copyright 2013 Siemens Schweiz AG * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. * - * Based on: - * TI AM335x boards information header - * u-boot:/board/ti/am335x/board.h - * - * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/ + * TI am335x specifics moved to ../common/board_am335x.h */ -#ifndef _BOARD_H_ -#define _BOARD_H_ +#ifndef _BOARD_DRACO_H_ +#define _BOARD_DRACO_H_ #define PARGS(x) #x , /* Parameter Name */ \ settings.ddr3.x, /* EEPROM Value */ \ @@ -58,21 +54,4 @@ struct draco_baseboard_id { struct chip_data chip; }; -/* - * We have three pin mux functions that must exist. We must be able to enable - * uart0, for initial output and i2c0 to read the main EEPROM. We then have a - * main pinmux function that can be overridden to enable all other pinmux that - * is required on the board. - */ -void enable_uart0_pin_mux(void); -void enable_uart1_pin_mux(void); -void enable_uart2_pin_mux(void); -void enable_uart3_pin_mux(void); -void enable_uart4_pin_mux(void); -void enable_uart5_pin_mux(void); -void enable_i2c0_pin_mux(void); -void enable_board_pin_mux(void); - -/* Forwared declaration, defined in common board.c */ -void set_env_gpios(unsigned char state); -#endif +#endif /* _BOARD_DRACO_H_ */ diff --git a/board/siemens/pxm2/MAINTAINERS b/board/siemens/pxm2/MAINTAINERS index dc02fe87c9..4902544607 100644 --- a/board/siemens/pxm2/MAINTAINERS +++ b/board/siemens/pxm2/MAINTAINERS @@ -1,5 +1,5 @@ PXM2 BOARD -M: Samuel Egli +M: Enrico Leto S: Maintained F: board/siemens/pxm2/ F: include/configs/pxm2.h diff --git a/board/siemens/pxm2/Makefile b/board/siemens/pxm2/Makefile index 1d0cb82bcb..aae536472c 100644 --- a/board/siemens/pxm2/Makefile +++ b/board/siemens/pxm2/Makefile @@ -14,6 +14,7 @@ obj-y := mux.o endif obj-y += board.o +obj-y += ../common/board_am335x.o obj-y += ../common/eeprom.o ifndef CONFIG_SPL_BUILD obj-y += ../common/factoryset.o diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c index 16b0d3df75..bff6d20251 100644 --- a/board/siemens/pxm2/board.c +++ b/board/siemens/pxm2/board.c @@ -35,7 +35,7 @@ #include #include #include -#include "board.h" +#include "../common/board_am335x.h" #include "../common/eeprom.h" #include "../common/factoryset.h" #include "pmic.h" @@ -43,7 +43,7 @@ #include #ifdef CONFIG_SPL_BUILD -static void board_init_ddr(void) +void draco_init_ddr(void) { struct emif_regs pxm2_ddr3_emif_reg_data = { .sdram_config = 0x41805332, @@ -135,7 +135,7 @@ int voltage_update(unsigned int module, unsigned char vddx_op_vol_sel) const struct dpll_params dpll_mpu_pxm2 = { 720, OSC-1, 1, -1, -1, -1, -1}; -void spl_siemens_board_init(void) +void spl_draco_board_init(void) { uchar buf[4]; /* @@ -162,7 +162,7 @@ void spl_siemens_board_init(void) } } -int read_eeprom(void) +int draco_read_eeprom(void) { /* nothing ToDo here for this board */ @@ -275,5 +275,3 @@ int board_late_init(void) return 0; } #endif - -#include "../common/board.c" diff --git a/board/siemens/pxm2/board.h b/board/siemens/pxm2/board.h deleted file mode 100644 index 9067e4d5aa..0000000000 --- a/board/siemens/pxm2/board.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * board.h - * - * (C) Copyright 2013 Siemens Schweiz AG - * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * Based on: - * TI AM335x boards information header - * u-boot:/board/ti/am335x/board.h - * - * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/ - */ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -void enable_uart0_pin_mux(void); -void enable_i2c0_pin_mux(void); -void enable_board_pin_mux(void); -#endif diff --git a/board/siemens/rut/MAINTAINERS b/board/siemens/rut/MAINTAINERS index 1e92710904..4d8e256709 100644 --- a/board/siemens/rut/MAINTAINERS +++ b/board/siemens/rut/MAINTAINERS @@ -1,5 +1,5 @@ RUT BOARD -M: Samuel Egli +M: Enrico Leto S: Maintained F: board/siemens/rut/ F: include/configs/rut.h diff --git a/board/siemens/rut/Makefile b/board/siemens/rut/Makefile index 1d0cb82bcb..aae536472c 100644 --- a/board/siemens/rut/Makefile +++ b/board/siemens/rut/Makefile @@ -14,6 +14,7 @@ obj-y := mux.o endif obj-y += board.o +obj-y += ../common/board_am335x.o obj-y += ../common/eeprom.o ifndef CONFIG_SPL_BUILD obj-y += ../common/factoryset.o diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c index d9e84db03e..1e0e131add 100644 --- a/board/siemens/rut/board.c +++ b/board/siemens/rut/board.c @@ -35,7 +35,7 @@ #include #include #include -#include "board.h" +#include "../common/board_am335x.h" #include "../common/eeprom.h" #include "../common/factoryset.h" @@ -43,12 +43,12 @@ /* * Read header information from EEPROM into global structure. */ -static int read_eeprom(void) +int draco_read_eeprom(void) { return 0; } -static void board_init_ddr(void) +void draco_init_ddr(void) { struct emif_regs rut_ddr3_emif_reg_data = { .sdram_config = 0x61C04AB2, @@ -125,7 +125,7 @@ err: #define REQUEST_AND_PULSE_RESET(N) \ request_and_pulse_reset(N, #N); -static void spl_siemens_board_init(void) +void spl_draco_board_init(void) { REQUEST_AND_PULSE_RESET(ETH_PHY_RESET_GPIO); REQUEST_AND_PULSE_RESET(MAXTOUCH_RESET_GPIO); @@ -245,5 +245,3 @@ int board_late_init(void) return 0; } #endif - -#include "../common/board.c" diff --git a/board/siemens/rut/board.h b/board/siemens/rut/board.h deleted file mode 100644 index 9067e4d5aa..0000000000 --- a/board/siemens/rut/board.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * board.h - * - * (C) Copyright 2013 Siemens Schweiz AG - * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * Based on: - * TI AM335x boards information header - * u-boot:/board/ti/am335x/board.h - * - * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/ - */ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -void enable_uart0_pin_mux(void); -void enable_i2c0_pin_mux(void); -void enable_board_pin_mux(void); -#endif