From: Marek Vasut Date: Mon, 6 Aug 2018 19:42:05 +0000 (+0200) Subject: ARM: socfpga: clk: Convert to clock framework X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d81b5da3fef726f645132e1b84caed7b6e34020f;p=u-boot.git ARM: socfpga: clk: Convert to clock framework Use clock framework functions to fetch clock information now that there is a clock driver for Arria10, instead of custom coded register parsing. Signed-off-by: Marek Vasut Cc: Chin Liang See Cc: Dinh Nguyen Cc: Ley Foon Tan --- diff --git a/arch/arm/mach-socfpga/clock_manager_arria10.c b/arch/arm/mach-socfpga/clock_manager_arria10.c index 9bc87aab7d..1b4052cd37 100644 --- a/arch/arm/mach-socfpga/clock_manager_arria10.c +++ b/arch/arm/mach-socfpga/clock_manager_arria10.c @@ -903,50 +903,6 @@ void cm_use_intosc(void) CLKMGR_CLKMGR_CTL_BOOTCLK_INTOSC_SET_MSK); } -unsigned int cm_get_noc_clk_hz(void) -{ - unsigned int clk_src, divisor, nocclk, src_hz; - - nocclk = readl(&clock_manager_base->main_pll.nocclk); - clk_src = (nocclk >> CLKMGR_MAINPLL_NOCCLK_SRC_LSB) & - CLKMGR_MAINPLL_NOCCLK_SRC_MSK; - - divisor = 1 + (nocclk & CLKMGR_MAINPLL_NOCDIV_MSK); - - if (clk_src == CLKMGR_PERPLLGRP_SRC_MAIN) { - src_hz = cm_get_main_vco_clk_hz(); - src_hz /= 1 + - (readl(SOCFPGA_CLKMGR_ADDRESS + CLKMGR_MAINPLL_NOC_CLK_OFFSET) & - CLKMGR_MAINPLL_NOCCLK_CNT_MSK); - } else if (clk_src == CLKMGR_PERPLLGRP_SRC_PERI) { - src_hz = cm_get_per_vco_clk_hz(); - src_hz /= 1 + - ((readl(SOCFPGA_CLKMGR_ADDRESS + - CLKMGR_MAINPLL_NOC_CLK_OFFSET) >> - CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB) & - CLKMGR_MAINPLL_NOCCLK_CNT_MSK); - } else if (clk_src == CLKMGR_PERPLLGRP_SRC_OSC1) { - src_hz = eosc1_hz; - } else if (clk_src == CLKMGR_PERPLLGRP_SRC_INTOSC) { - src_hz = cb_intosc_hz; - } else if (clk_src == CLKMGR_PERPLLGRP_SRC_FPGA) { - src_hz = f2s_free_hz; - } else { - src_hz = 0; - } - - return src_hz / divisor; -} - -unsigned int cm_get_l4_noc_hz(unsigned int nocdivshift) -{ - unsigned int divisor2 = 1 << - ((readl(&clock_manager_base->main_pll.nocdiv) >> - nocdivshift) & CLKMGR_MAINPLL_NOCDIV_MSK); - - return cm_get_noc_clk_hz() / divisor2; -} - int cm_basic_init(const void *blob) { struct mainpll_cfg main_cfg; @@ -964,199 +920,71 @@ int cm_basic_init(const void *blob) return cm_full_cfg(&main_cfg, &per_cfg); } -unsigned long cm_get_mpu_clk_hz(void) +static u32 cm_get_rate_dm(char *name) { - u32 reg, clk_hz; - u32 clk_src, mainmpuclk_reg; - - mainmpuclk_reg = readl(&clock_manager_base->main_pll.mpuclk); - - clk_src = (mainmpuclk_reg >> CLKMGR_MAINPLL_MPUCLK_SRC_LSB) & - CLKMGR_MAINPLL_MPUCLK_SRC_MSK; - - reg = readl(&clock_manager_base->altera.mpuclk); - /* Check MPU clock source: main, periph, osc1, intosc or f2s? */ - switch (clk_src) { - case CLKMGR_MAINPLL_MPUCLK_SRC_MAIN: - clk_hz = cm_get_main_vco_clk_hz(); - clk_hz /= (reg & CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1; - break; - case CLKMGR_MAINPLL_MPUCLK_SRC_PERI: - clk_hz = cm_get_per_vco_clk_hz(); - clk_hz /= (((reg >> CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB) & - CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1); - break; - case CLKMGR_MAINPLL_MPUCLK_SRC_OSC1: - clk_hz = eosc1_hz; - break; - case CLKMGR_MAINPLL_MPUCLK_SRC_INTOSC: - clk_hz = cb_intosc_hz; - break; - case CLKMGR_MAINPLL_MPUCLK_SRC_FPGA: - clk_hz = f2s_free_hz; - break; - default: - printf("cm_get_mpu_clk_hz invalid clk_src %d\n", clk_src); + struct uclass *uc; + struct udevice *dev = NULL; + struct clk clk = { 0 }; + ulong rate; + int ret; + + /* Device addresses start at 1 */ + ret = uclass_get(UCLASS_CLK, &uc); + if (ret) return 0; - } - - clk_hz /= (mainmpuclk_reg & CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1; - - return clk_hz; -} -unsigned int cm_get_per_vco_clk_hz(void) -{ - u32 src_hz = 0; - u32 clk_src = 0; - u32 numer = 0; - u32 denom = 0; - u32 vco = 0; - - clk_src = readl(&clock_manager_base->per_pll.vco0); - - clk_src = (clk_src >> CLKMGR_PERPLL_VCO0_PSRC_LSB) & - CLKMGR_PERPLL_VCO0_PSRC_MSK; - - if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_EOSC) { - src_hz = eosc1_hz; - } else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC) { - src_hz = cb_intosc_hz; - } else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_F2S) { - src_hz = f2s_free_hz; - } else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_MAIN) { - src_hz = cm_get_main_vco_clk_hz(); - src_hz /= (readl(&clock_manager_base->main_pll.cntr15clk) & - CLKMGR_MAINPLL_CNTRCLK_MSK) + 1; - } else { - printf("cm_get_per_vco_clk_hz invalid clk_src %d\n", clk_src); + ret = uclass_get_device_by_name(UCLASS_CLK, name, &dev); + if (ret) return 0; - } - vco = readl(&clock_manager_base->per_pll.vco1); - - numer = vco & CLKMGR_PERPLL_VCO1_NUMER_MSK; - - denom = (vco >> CLKMGR_PERPLL_VCO1_DENOM_LSB) & - CLKMGR_PERPLL_VCO1_DENOM_MSK; - - vco = src_hz; - vco /= 1 + denom; - vco *= 1 + numer; - - return vco; -} - -unsigned int cm_get_main_vco_clk_hz(void) -{ - u32 src_hz, numer, denom, vco; - - u32 clk_src = readl(&clock_manager_base->main_pll.vco0); - - clk_src = (clk_src >> CLKMGR_MAINPLL_VCO0_PSRC_LSB) & - CLKMGR_MAINPLL_VCO0_PSRC_MSK; - - if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_EOSC) { - src_hz = eosc1_hz; - } else if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC) { - src_hz = cb_intosc_hz; - } else if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_F2S) { - src_hz = f2s_free_hz; - } else { - printf("cm_get_main_vco_clk_hz invalid clk_src %d\n", clk_src); + ret = device_probe(dev); + if (ret) return 0; - } - - vco = readl(&clock_manager_base->main_pll.vco1); - - numer = vco & CLKMGR_MAINPLL_VCO1_NUMER_MSK; - denom = (vco >> CLKMGR_MAINPLL_VCO1_DENOM_LSB) & - CLKMGR_MAINPLL_VCO1_DENOM_MSK; + ret = clk_request(dev, &clk); + if (ret) + return 0; - vco = src_hz; - vco /= 1 + denom; - vco *= 1 + numer; + rate = clk_get_rate(&clk); - return vco; -} + clk_free(&clk); -unsigned int cm_get_l4_sp_clk_hz(void) -{ - return cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4SPCLK_LSB); + return rate; } -unsigned int cm_get_mmc_controller_clk_hz(void) +static u32 cm_get_rate_dm_khz(char *name) { - u32 clk_hz = 0; - u32 clk_input = 0; - - clk_input = readl(&clock_manager_base->per_pll.cntr6clk); - clk_input = (clk_input >> CLKMGR_PERPLL_CNTR6CLK_SRC_LSB) & - CLKMGR_PERPLLGRP_SRC_MSK; - - switch (clk_input) { - case CLKMGR_PERPLLGRP_SRC_MAIN: - clk_hz = cm_get_main_vco_clk_hz(); - clk_hz /= 1 + (readl(&clock_manager_base->main_pll.cntr6clk) & - CLKMGR_MAINPLL_CNTRCLK_MSK); - break; - - case CLKMGR_PERPLLGRP_SRC_PERI: - clk_hz = cm_get_per_vco_clk_hz(); - clk_hz /= 1 + (readl(&clock_manager_base->per_pll.cntr6clk) & - CLKMGR_PERPLL_CNTRCLK_MSK); - break; - - case CLKMGR_PERPLLGRP_SRC_OSC1: - clk_hz = eosc1_hz; - break; - - case CLKMGR_PERPLLGRP_SRC_INTOSC: - clk_hz = cb_intosc_hz; - break; - - case CLKMGR_PERPLLGRP_SRC_FPGA: - clk_hz = f2s_free_hz; - break; - } - - return clk_hz / 4; + return cm_get_rate_dm(name) / 1000; } -unsigned int cm_get_spi_controller_clk_hz(void) +unsigned long cm_get_mpu_clk_hz(void) { - return cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB); + return cm_get_rate_dm("main_mpu_base_clk"); } unsigned int cm_get_qspi_controller_clk_hz(void) { - return cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB); + return cm_get_rate_dm("qspi_clk"); } -/* Override weak dw_spi_get_clk implementation in designware_spi.c driver */ -int dw_spi_get_clk(struct udevice *bus, ulong *rate) +unsigned int cm_get_l4_sp_clk_hz(void) { - *rate = cm_get_spi_controller_clk_hz(); - - return 0; + return cm_get_rate_dm("l4_sp_clk"); } void cm_print_clock_quick_summary(void) { - printf("MPU %10ld kHz\n", cm_get_mpu_clk_hz() / 1000); - printf("MMC %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000); - printf("QSPI %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000); - printf("SPI %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000); - printf("EOSC1 %8d kHz\n", eosc1_hz / 1000); - printf("cb_intosc %8d kHz\n", cb_intosc_hz / 1000); - printf("f2s_free %8d kHz\n", f2s_free_hz / 1000); - printf("Main VCO %8d kHz\n", cm_get_main_vco_clk_hz() / 1000); - printf("NOC %8d kHz\n", cm_get_noc_clk_hz() / 1000); - printf("L4 Main %8d kHz\n", - cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB) / 1000); - printf("L4 MP %8d kHz\n", - cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB) / 1000); - printf("L4 SP %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000); - printf("L4 sys free %8d kHz\n", cm_get_noc_clk_hz() / 4000); + printf("MPU %10d kHz\n", cm_get_rate_dm_khz("main_mpu_base_clk")); + printf("MMC %8d kHz\n", cm_get_rate_dm_khz("sdmmc_clk")); + printf("QSPI %8d kHz\n", cm_get_rate_dm_khz("qspi_clk")); + printf("SPI %8d kHz\n", cm_get_rate_dm_khz("spi_m_clk")); + printf("EOSC1 %8d kHz\n", cm_get_rate_dm_khz("osc1")); + printf("cb_intosc %8d kHz\n", cm_get_rate_dm_khz("cb_intosc_ls_clk")); + printf("f2s_free %8d kHz\n", cm_get_rate_dm_khz("f2s_free_clk")); + printf("Main VCO %8d kHz\n", cm_get_rate_dm_khz("main_pll@40")); + printf("NOC %8d kHz\n", cm_get_rate_dm_khz("main_noc_base_clk")); + printf("L4 Main %8d kHz\n", cm_get_rate_dm_khz("l4_main_clk")); + printf("L4 MP %8d kHz\n", cm_get_rate_dm_khz("l4_mp_clk")); + printf("L4 SP %8d kHz\n", cm_get_rate_dm_khz("l4_sp_clk")); + printf("L4 sys free %8d kHz\n", cm_get_rate_dm_khz("l4_sys_free_clk")); } diff --git a/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h b/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h index cb2306e5bc..b3c8853aa3 100644 --- a/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h +++ b/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h @@ -90,18 +90,12 @@ struct socfpga_clock_manager { }; void cm_use_intosc(void); -unsigned int cm_get_noc_clk_hz(void); -unsigned int cm_get_l4_noc_hz(unsigned int nocdivshift); int cm_basic_init(const void *blob); unsigned int cm_get_l4_sp_clk_hz(void); -unsigned int cm_get_main_vco_clk_hz(void); -unsigned int cm_get_per_vco_clk_hz(void); unsigned long cm_get_mpu_clk_hz(void); unsigned int cm_get_qspi_controller_clk_hz(void); -unsigned int cm_get_mmc_controller_clk_hz(void); -unsigned int cm_get_spi_controller_clk_hz(void); #endif /* __ASSEMBLER__ */