From: Simon Glass Date: Sat, 12 Sep 2015 17:50:08 +0000 (-0600) Subject: arm: Remove da830evm board X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d7e8b2b98a0daad6bc2e91c2bc9f3414705b7f89;p=u-boot.git arm: Remove da830evm board This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass --- diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 8079fabd6f..a8d3e2f230 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -8,9 +8,6 @@ config TARGET_IPAM390 bool "IPAM390 board" select SUPPORT_SPL -config TARGET_DA830EVM - bool "DA830 EVM board" - config TARGET_DA850EVM bool "DA850 EVM board" select SUPPORT_SPL diff --git a/board/davinci/da8xxevm/Kconfig b/board/davinci/da8xxevm/Kconfig index 33bfcc3558..7d0de1d0fa 100644 --- a/board/davinci/da8xxevm/Kconfig +++ b/board/davinci/da8xxevm/Kconfig @@ -1,16 +1,3 @@ -if TARGET_DA830EVM - -config SYS_BOARD - default "da8xxevm" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "da830evm" - -endif - if TARGET_DA850EVM config SYS_BOARD diff --git a/board/davinci/da8xxevm/da830evm.c b/board/davinci/da8xxevm/da830evm.c deleted file mode 100644 index c40587ff09..0000000000 --- a/board/davinci/da8xxevm/da830evm.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. - * - * Base on code from TI. Original Notices follow: - * - * (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/ - * - * Modified for DA8xx EVM. - * - * Copyright (C) 2007 Sergey Kubushyn - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * ----------------------------------------------------------------- - * - * Copyright (C) 2004 Texas Instruments. - * - * ---------------------------------------------------------------------------- - * SPDX-License-Identifier: GPL-2.0+ - * ---------------------------------------------------------------------------- - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_DAVINCI_MMC -#include -#include -#endif - -DECLARE_GLOBAL_DATA_PTR; - -static const struct pinmux_resource pinmuxes[] = { -#ifdef CONFIG_SPI_FLASH - PINMUX_ITEM(spi0_pins_base), - PINMUX_ITEM(spi0_pins_scs0), - PINMUX_ITEM(spi0_pins_ena), -#endif - PINMUX_ITEM(uart2_pins_txrx), - PINMUX_ITEM(i2c0_pins), -#ifdef CONFIG_USB_DA8XX - PINMUX_ITEM(usb_pins), -#endif -#ifdef CONFIG_USE_NAND - PINMUX_ITEM(emifa_pins), - PINMUX_ITEM(emifa_pins_cs0), - PINMUX_ITEM(emifa_pins_cs2), - PINMUX_ITEM(emifa_pins_cs3), -#endif -#if defined(CONFIG_DRIVER_TI_EMAC) - PINMUX_ITEM(emac_pins_rmii), - PINMUX_ITEM(emac_pins_mdio), - PINMUX_ITEM(emac_pins_rmii_clk_source), -#endif -#ifdef CONFIG_DAVINCI_MMC - PINMUX_ITEM(mmc0_pins_8bit) -#endif -}; - -static const struct lpsc_resource lpsc[] = { - { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */ - { DAVINCI_LPSC_SPI0 }, /* Serial Flash */ - { DAVINCI_LPSC_EMAC }, /* image download */ - { DAVINCI_LPSC_UART2 }, /* console */ - { DAVINCI_LPSC_GPIO }, -#ifdef CONFIG_DAVINCI_MMC - { DAVINCI_LPSC_MMC_SD }, -#endif - -}; - -#ifdef CONFIG_DAVINCI_MMC -static struct davinci_mmc mmc_sd0 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE, - .host_caps = MMC_MODE_8BIT, - .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .version = MMC_CTLR_VERSION_2, -}; - -int board_mmc_init(bd_t *bis) -{ - mmc_sd0.input_clk = clk_get(DAVINCI_MMCSD_CLKID); - - printf("%x\n", mmc_sd0.input_clk); - - /* Add slot-0 to mmc subsystem */ - return davinci_mmc_init(bis, &mmc_sd0); -} -#endif - -int board_init(void) -{ -#ifndef CONFIG_USE_IRQ - irq_init(); -#endif - -#ifdef CONFIG_NAND_DAVINCI - /* EMIFA 100MHz clock select */ - writel(readl(&davinci_syscfg_regs->cfgchip3) & ~2, - &davinci_syscfg_regs->cfgchip3); - /* NAND CS setup */ - writel((DAVINCI_ABCR_WSETUP(0) | - DAVINCI_ABCR_WSTROBE(2) | - DAVINCI_ABCR_WHOLD(0) | - DAVINCI_ABCR_RSETUP(0) | - DAVINCI_ABCR_RSTROBE(2) | - DAVINCI_ABCR_RHOLD(0) | - DAVINCI_ABCR_TA(2) | - DAVINCI_ABCR_ASIZE_8BIT), - &davinci_emif_regs->ab2cr); -#endif - - /* arch number of the board */ - gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA830_EVM; - - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* - * Power on required peripherals - * ARM does not have access by default to PSC0 and PSC1 - * assuming here that the DSP bootloader has set the IOPU - * such that PSC access is available to ARM - */ - if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc))) - return 1; - - /* setup the SUSPSRC for ARM to control emulation suspend */ - writel(readl(&davinci_syscfg_regs->suspsrc) & - ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | - DAVINCI_SYSCFG_SUSPSRC_SPI0 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | - DAVINCI_SYSCFG_SUSPSRC_UART2), - &davinci_syscfg_regs->suspsrc); - - /* configure pinmux settings */ - if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes))) - return 1; - - /* enable the console UART */ - writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | - DAVINCI_UART_PWREMU_MGMT_UTRST), - &davinci_uart2_ctrl_regs->pwremu_mgmt); - - return(0); -} - - -#ifdef CONFIG_NAND_DAVINCI -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - - return 0; -} -#endif - -#if defined(CONFIG_DRIVER_TI_EMAC) - -#define PHY_SW_I2C_ADDR 0x5f /* Address of PHY on i2c bus */ - -/* - * Initializes on-board ethernet controllers. - */ -int board_eth_init(bd_t *bis) -{ - u_int8_t mac_addr[6]; - u_int8_t switch_start_cmd[2] = { 0x01, 0x23 }; - struct eth_device *dev; - - /* Read Ethernet MAC address from EEPROM */ - if (dvevm_read_mac_address(mac_addr)) - /* set address env if not already set */ - davinci_sync_env_enetaddr(mac_addr); - - /* read the address back from env */ - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) - return -1; - - /* enable the Ethernet switch in the 3 port PHY */ - if (i2c_write(PHY_SW_I2C_ADDR, 0, 0, - switch_start_cmd, sizeof(switch_start_cmd))) { - printf("Ethernet switch start failed!\n"); - return -1; - } - - /* finally, initialise the driver */ - if (!davinci_emac_initialize()) { - printf("Error: Ethernet init failed!\n"); - return -1; - } - - dev = eth_get_dev(); - - /* provide the resulting addr to the driver */ - memcpy(dev->enetaddr, mac_addr, 6); - dev->write_hwaddr(dev); - - return 0; -} -#endif /* CONFIG_DRIVER_TI_EMAC */ diff --git a/configs/da830evm_defconfig b/configs/da830evm_defconfig deleted file mode 100644 index 3dda85779a..0000000000 --- a/configs/da830evm_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DA830EVM=y -CONFIG_SYS_PROMPT="U-Boot > " -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SPI_FLASH=y diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h deleted file mode 100644 index 7ac3224e6e..0000000000 --- a/include/configs/da830evm.h +++ /dev/null @@ -1,279 +0,0 @@ -/* - * Copyright (C) 2008 Texas Instruments, Inc - * - * Based on davinci_dvevm.h. Original Copyrights follow: - * - * Copyright (C) 2007 Sergey Kubushyn - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Board - */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_USE_SPIFLASH - -/* - * SoC Configuration - */ -#define CONFIG_MACH_DAVINCI_DA830_EVM -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA830 /* TI DA830 SoC */ -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) -#define CONFIG_SYS_OSCIN_FREQ 24000000 -#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TEXT_BASE 0xc1080000 - -/* - * Memory Info - */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Start */ -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - (32 << 20)) -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ - -/* - * Serial Driver info - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ -#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ - -/* - * I2C Configuration - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 25000 /* 100Kbps won't work, H/W bug */ -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ - -/* - * I2C EEPROM definitions for catalyst 24W256 EEPROM chip - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 - -/* - * Network & Ethernet Configuration - */ -#ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#endif - -/* - * Flash & Environment - */ -#ifdef CONFIG_USE_NAND -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#define CONFIG_ENV_OFFSET (512 << 10) -#define CONFIG_ENV_SIZE (10 << 10) /* 10KB */ -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_NAND_CS 3 -#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE -#define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_NAND_MASK_CLE 0x10 -#define CONFIG_SYS_NAND_MASK_ALE 0x8 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#endif - -#ifdef CONFIG_USE_NOR -#define CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ -#define CONFIG_SYS_FLASH_SECT_SZ (64 << 10) /* 64KB */ -#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*3) -#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE -#define PHYS_FLASH_SIZE (32 << 20) /* Flash size 32MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ) -#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ -#define CONFIG_SYS_FLASH_SPL_ACCESS -#endif - -#ifdef CONFIG_USE_SPIFLASH -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SIZE (16 << 10) -#define CONFIG_ENV_OFFSET (256 << 10) -#define CONFIG_ENV_SECT_SIZE 4096 -#define CONFIG_SYS_NO_FLASH -#define CONFIG_SPI -#define CONFIG_SPI_FLASH_WINBOND -#define CONFIG_DAVINCI_SPI -#define CONFIG_SYS_SPI_BASE DAVINCI_SPI0_BASE -#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI0_CLKID) -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED -#endif - -/* - * USB configuration - */ -#define CONFIG_USB_DA8XX /* Platform hookup to MUSB controller */ -#define CONFIG_USB_MUSB_HCD - -/* - * U-Boot general configuration - */ -#undef CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* - * Linux Information - */ -#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock/2 rw noinitrd ip=dhcp" -#define CONFIG_BOOTCOMMAND "" -#define CONFIG_BOOTDELAY 3 - -/* - * U-Boot commands - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifndef CONFIG_DRIVER_TI_EMAC -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING -#endif - -#ifdef CONFIG_USE_NAND -#define CONFIG_CMD_NAND -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#endif - -#ifdef CONFIG_USE_SPIFLASH -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF -#endif - -/* SD/MMC configuration */ -#ifndef CONFIG_USE_NAND -#define CONFIG_MMC -#define CONFIG_DAVINCI_MMC_SD1 -#define CONFIG_GENERIC_MMC -#define CONFIG_DAVINCI_MMC -#endif - -/* - * Enable MMC commands only when - * MMC support is present - */ -#if defined(CONFIG_MMC) || defined(CONFIG_USB_DA8XX) -#define CONFIG_DOS_PARTITION /* include support for FAT/storage */ -#define CONFIG_CMD_FAT /* include support for FAT cmd */ -#endif - -#ifdef CONFIG_MMC -#define CONFIG_CMD_MMC -#define CONFIG_CMD_EXT2 -#endif - -#if !defined(CONFIG_USE_NAND) && \ - !defined(CONFIG_USE_NOR) && \ - !defined(CONFIG_USE_SPIFLASH) -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_SIZE (16 << 10) -#undef CONFIG_CMD_ENV -#endif - -#ifdef CONFIG_USB_DA8XX - -#ifdef CONFIG_USB_MUSB_HCD /* include support for usb host */ -#define CONFIG_CMD_USB /* include support for usb cmd */ - -#define CONFIG_USB_STORAGE /* MSC class support */ -#define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */ - -#ifdef CONFIG_USB_KEYBOARD /* HID class support */ -#define CONFIG_SYS_USB_EVENT_POLL -#define CONFIG_PREBOOT "usb start" -#endif /* CONFIG_USB_KEYBOARD */ - -#endif /* CONFIG_USB_MUSB_HCD */ - -#ifdef CONFIG_USB_MUSB_UDC -/* USB device configuration */ -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -/* Change these to suit your needs */ -#define CONFIG_USBD_VENDORID 0x0451 -#define CONFIG_USBD_PRODUCTID 0x5678 -#define CONFIG_USBD_MANUFACTURER "Texas Instruments" -#define CONFIG_USBD_PRODUCT_NAME "DA830EVM" -#endif /* CONFIG_USB_MUSB_UDC */ - -#endif /* CONFIG_USB_DA8XX */ - -#ifdef CONFIG_MTD_PARTITIONS -#define MTDIDS_DEFAULT "nand0=davinci_nand.1" -#define PART_BOOT "512k(bootloader)ro," -#define PART_PARAMS "512k(params)ro," -#define PART_KERNEL "4m(kernel)," -#define PART_REST "-(filesystem)" -#define MTDPARTS_DEFAULT \ - "mtdparts=davinci_nand.1:" PART_BOOT PART_PARAMS PART_KERNEL PART_REST -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ - -/* additions for new relocation code, must be added to all boards */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */