From: Chen-Yu Tsai Date: Sat, 28 Apr 2018 05:36:01 +0000 (+0800) Subject: sunxi: Split out common board design for ALL-H3-CC device tree X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d7b17f1c24afc8bd4e112b6736427e608e43acba;p=u-boot.git sunxi: Split out common board design for ALL-H3-CC device tree The Libre Computer Project ALL-H3-CC has three models, all using the same board design, but with different pin compatible SoCs and amount of DRAM. Currently only the H3 1GB DRAM variant is supported. To support the two other variants, first split the original device tree into a common board design part and an SoC specific part. The SoC part only defines which SoC is used and model name, and includes the SoC specific dtsi file and the common design dtsi file. Also fix up the SPDX identifier line to use the correct comment style, and place it on the first line. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Reviewed-by: Jagan Teki --- diff --git a/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts index c8fd69f0a4..50f2fb30d2 100644 --- a/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts +++ b/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts @@ -1,175 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Chen-Yu Tsai - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; #include "sun8i-h3.dtsi" - -#include -#include +#include "sunxi-libretech-all-h3-cc.dtsi" / { model = "Libre Computer Board ALL-H3-CC H3"; compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3"; - - aliases { - ethernet0 = &emac; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - pwr_led { - label = "librecomputer:green:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ - default-state = "on"; - }; - - status_led { - label = "librecomputer:blue:status"; - gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - - power { - label = "power"; - linux,code = ; - gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ - }; - }; - - reg_vcc1v2: vcc1v2 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_vcc5v0>; - gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ - enable-active-high; - }; - - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <®_vcc5v0>; - }; - - /* This represents the board's 5V input */ - reg_vcc5v0: vcc5v0 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_vcc_dram: vcc-dram { - compatible = "regulator-fixed"; - regulator-name = "vcc-dram"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_vcc5v0>; - gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ - enable-active-high; - }; - - reg_vcc_io: vcc-io { - compatible = "regulator-fixed"; - regulator-name = "vcc-io"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_vcc3v3>; - gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */ - }; - - reg_vdd_cpux: vdd-cpux { - compatible = "regulator-fixed"; - regulator-name = "vdd-cpux"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_vcc5v0>; - gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ - enable-active-high; - }; -}; - -&ehci1 { - status = "okay"; -}; - -&ehci2 { - status = "okay"; -}; - -&ehci3 { - status = "okay"; -}; - -&emac { - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - status = "okay"; -}; - -&ir { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; - status = "okay"; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; - vmmc-supply = <®_vcc_io>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -&ohci3 { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usbphy { - /* VBUS on USB ports are always on */ - usb0_vbus-supply = <®_vcc5v0>; - usb1_vbus-supply = <®_vcc5v0>; - usb2_vbus-supply = <®_vcc5v0>; - usb3_vbus-supply = <®_vcc5v0>; - status = "okay"; }; diff --git a/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi new file mode 100644 index 0000000000..5d01bba180 --- /dev/null +++ b/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi @@ -0,0 +1,168 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 Chen-Yu Tsai + */ + +#include +#include + +/ { + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr_led { + label = "librecomputer:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + + status_led { + label = "librecomputer:blue:status"; + gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + power { + label = "power"; + linux,code = ; + gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; + }; + + reg_vcc1v2: vcc1v2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-active-high; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v0>; + }; + + /* This represents the board's 5V input */ + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + enable-active-high; + }; + + reg_vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc-io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc3v3>; + gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */ + }; + + reg_vdd_cpux: vdd-cpux { + compatible = "regulator-fixed"; + regulator-name = "vdd-cpux"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-active-high; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc_io>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + /* VBUS on USB ports are always on */ + usb0_vbus-supply = <®_vcc5v0>; + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + usb3_vbus-supply = <®_vcc5v0>; + status = "okay"; +};