From: William Wu <william.wu@rock-chips.com>
Date: Thu, 14 Mar 2024 09:36:16 +0000 (+0100)
Subject: regulator: rk8xx: fix SWITCH enable on RK809
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d771597fbbade5c45ca6e0956ec3120b2d9bdce0;p=u-boot.git

regulator: rk8xx: fix SWITCH enable on RK809

On RK809 in PMIC_POWER_ENX registers, in order to set or clear a bit N,
the bit at offset N + 4 needs to be set otherwise nothing is done.

This fixes the inability to modify the SWITCH state on RK809.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: William Wu <william.wu@rock-chips.com>
[reworded commit log]
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
---

diff --git a/drivers/power/regulator/rk8xx.c b/drivers/power/regulator/rk8xx.c
index 97d73ac95e..e905df3a80 100644
--- a/drivers/power/regulator/rk8xx.c
+++ b/drivers/power/regulator/rk8xx.c
@@ -901,7 +901,7 @@ static int switch_set_enable(struct udevice *dev, bool enable)
 	case RK809_ID:
 		mask = (1 << (sw + 2)) | (1 << (sw + 6));
 		ret = pmic_clrsetbits(dev->parent, RK817_POWER_EN(3), mask,
-				      enable ? mask : 0);
+				      enable ? mask : (1 << (sw + 6)));
 		break;
 	case RK818_ID:
 		mask = 1 << 6;