From: Patrick Delaunay Date: Wed, 24 Nov 2021 09:52:18 +0000 (+0100) Subject: ram: stm32mp1: compute DDR size from DDRCTL registers X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d72e7bbe7c28;p=u-boot.git ram: stm32mp1: compute DDR size from DDRCTL registers Compute the DDR size from DDR controller register (mstr and addrmap) in U-Boot proper as the DDR information are useful only for SPL but not for U-Boot proper, for example with TFABOOT. This patch simplify U-Boot DT when several DDR size are supported and support of next SOC in STM32MP family. Signed-off-by: Patrick Delaunay Signed-off-by: Patrick Delaunay --- diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h b/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h index be89d81018..f1a26e31f6 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h +++ b/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h @@ -239,6 +239,7 @@ struct stm32mp1_ddrphy { #define DDRCTRL_MSTR_LPDDR2 BIT(2) #define DDRCTRL_MSTR_LPDDR3 BIT(3) #define DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK GENMASK(13, 12) +#define DDRCTRL_MSTR_DATA_BUS_WIDTH_SHIFT 12 #define DDRCTRL_MSTR_DATA_BUS_WIDTH_FULL (0 << 12) #define DDRCTRL_MSTR_DATA_BUS_WIDTH_HALF (1 << 12) #define DDRCTRL_MSTR_DATA_BUS_WIDTH_QUARTER (2 << 12) diff --git a/drivers/ram/stm32mp1/stm32mp1_ram.c b/drivers/ram/stm32mp1/stm32mp1_ram.c index 3b65269b98..69f2a99e7a 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ram.c +++ b/drivers/ram/stm32mp1/stm32mp1_ram.c @@ -16,6 +16,12 @@ #include #include #include "stm32mp1_ddr.h" +#include "stm32mp1_ddr_regs.h" + +/* DDR subsystem configuration */ +struct stm32mp1_ddr_cfg { + u8 nb_bytes; /* MEMC_DRAM_DATA_WIDTH */ +}; static const char *const clkname[] = { "ddrc1", @@ -165,6 +171,183 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) return 0; } +static u8 get_data_bus_width(struct stm32mp1_ddrctl *ctl) +{ + u32 reg = readl(&ctl->mstr) & DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK; + u8 data_bus_width = reg >> DDRCTRL_MSTR_DATA_BUS_WIDTH_SHIFT; + + return data_bus_width; +} + +static u8 get_nb_bank(struct stm32mp1_ddrctl *ctl) +{ + /* Count bank address bits */ + u8 bits = 0; + u32 reg, val; + + reg = readl(&ctl->addrmap1); + /* addrmap1.addrmap_bank_b1 */ + val = (reg & GENMASK(5, 0)) >> 0; + if (val <= 31) + bits++; + /* addrmap1.addrmap_bank_b2 */ + val = (reg & GENMASK(13, 8)) >> 8; + if (val <= 31) + bits++; + /* addrmap1.addrmap_bank_b3 */ + val = (reg & GENMASK(21, 16)) >> 16; + if (val <= 31) + bits++; + + return bits; +} + +static u8 get_nb_col(struct stm32mp1_ddrctl *ctl, u8 data_bus_width) +{ + u8 bits; + u32 reg, val; + + /* Count column address bits, start at 2 for b0 and b1 (fixed) */ + bits = 2; + + reg = readl(&ctl->addrmap2); + /* addrmap2.addrmap_col_b2 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap2.addrmap_col_b3 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + /* addrmap2.addrmap_col_b4 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 7) + bits++; + /* addrmap2.addrmap_col_b5 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 7) + bits++; + + reg = readl(&ctl->addrmap3); + /* addrmap3.addrmap_col_b6 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap3.addrmap_col_b7 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + /* addrmap3.addrmap_col_b8 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 7) + bits++; + /* addrmap3.addrmap_col_b9 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 7) + bits++; + + reg = readl(&ctl->addrmap4); + /* addrmap4.addrmap_col_b10 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap4.addrmap_col_b11 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + + /* + * column bits shift up: + * 1 when half the data bus is used (data_bus_width = 1) + * 2 when a quarter the data bus is used (data_bus_width = 2) + * nothing to do for full data bus (data_bus_width = 0) + */ + bits += data_bus_width; + + return bits; +} + +static u8 get_nb_row(struct stm32mp1_ddrctl *ctl) +{ + /* Count row address bits */ + u8 bits = 0; + u32 reg, val; + + reg = readl(&ctl->addrmap5); + /* addrmap5.addrmap_row_b0 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 11) + bits++; + /* addrmap5.addrmap_row_b1 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 11) + bits++; + /* addrmap5.addrmap_row_b2_10 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 11) + bits += 9; + else + printf("warning: addrmap5.addrmap_row_b2_10 not supported\n"); + /* addrmap5.addrmap_row_b11 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 11) + bits++; + + reg = readl(&ctl->addrmap6); + /* addrmap6.addrmap_row_b12 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap6.addrmap_row_b13 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + /* addrmap6.addrmap_row_b14 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 7) + bits++; + /* addrmap6.addrmap_row_b15 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 7) + bits++; + + return bits; +} + +/* + * stm32mp1_ddr_size + * + * Get the current DRAM size from the DDR CTL registers + * + * @return: DRAM size + */ +u32 stm32mp1_ddr_size(struct udevice *dev) +{ + u8 nb_bit; + u32 ddr_size; + u8 data_bus_width; + struct ddr_info *priv = dev_get_priv(dev); + struct stm32mp1_ddrctl *ctl = priv->ctl; + struct stm32mp1_ddr_cfg *cfg = (struct stm32mp1_ddr_cfg *)dev_get_driver_data(dev); + const u8 nb_bytes = cfg->nb_bytes; + + data_bus_width = get_data_bus_width(ctl); + nb_bit = get_nb_bank(ctl) + get_nb_col(ctl, data_bus_width) + + get_nb_row(ctl); + if (nb_bit > 32) { + nb_bit = 32; + debug("invalid DDR configuration: %d bits\n", nb_bit); + } + + ddr_size = (nb_bytes >> data_bus_width) << nb_bit; + if (ddr_size > STM32_DDR_SIZE) { + ddr_size = STM32_DDR_SIZE; + debug("invalid DDR configuration: size = %x\n", ddr_size); + } + + return ddr_size; +} + static int stm32mp1_ddr_probe(struct udevice *dev) { struct ddr_info *priv = dev_get_priv(dev); @@ -191,8 +374,8 @@ static int stm32mp1_ddr_probe(struct udevice *dev) return log_ret(ret); } - ofnode node = stm32mp1_ddr_get_ofnode(dev); - priv->info.size = ofnode_read_u32_default(node, "st,mem-size", 0); + priv->info.size = stm32mp1_ddr_size(dev); + return 0; } @@ -209,8 +392,12 @@ static struct ram_ops stm32mp1_ddr_ops = { .get_info = stm32mp1_ddr_get_info, }; +static const struct stm32mp1_ddr_cfg stm32mp15x_ddr_cfg = { + .nb_bytes = 4, +}; + static const struct udevice_id stm32mp1_ddr_ids[] = { - { .compatible = "st,stm32mp1-ddr" }, + { .compatible = "st,stm32mp1-ddr", .data = (ulong)&stm32mp15x_ddr_cfg}, { } };