From: Andreas Bießmann Date: Sun, 12 Jun 2011 01:49:13 +0000 (+0000) Subject: arm920t/at91: add at91rm9200_devices.c X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d703355fd1d77c71d6a2a5c589714c4ce4560c28;p=u-boot.git arm920t/at91: add at91rm9200_devices.c This is a copy of arm926ejs/at91 api for perpherial initialisation. At the moment we just need the usart part of the api. Signed-off-by: Andreas Bießmann --- diff --git a/arch/arm/cpu/arm920t/at91/Makefile b/arch/arm/cpu/arm920t/at91/Makefile index 4417dfef7c..309bcd69cd 100644 --- a/arch/arm/cpu/arm920t/at91/Makefile +++ b/arch/arm/cpu/arm920t/at91/Makefile @@ -30,6 +30,7 @@ COBJS += reset.o COBJS += timer.o COBJS += clock.o COBJS += cpu.o +COBJS += at91rm9200_devices.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/arch/arm/cpu/arm920t/at91/at91rm9200_devices.c b/arch/arm/cpu/arm920t/at91/at91rm9200_devices.c new file mode 100644 index 0000000000..f610a1e562 --- /dev/null +++ b/arch/arm/cpu/arm920t/at91/at91rm9200_devices.c @@ -0,0 +1,85 @@ +/* + * [partely copied from arch/arm/cpu/arm926ejs/at91/arm9260_devices.c] + * + * (C) Copyright 2011 + * Andreas Bießmann + * + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 17, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 18, PUP); /* RXD0 */ + writel(1 << ATMEL_ID_USART0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 20, PUP); /* RXD1 */ + at91_set_a_periph(AT91_PIO_PORTB, 21, 1); /* TXD1 */ + writel(1 << ATMEL_ID_USART1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 22, PUP); /* RXD2 */ + at91_set_a_periph(AT91_PIO_PORTA, 23, 1); /* TXD2 */ + writel(1 << ATMEL_ID_USART2, &pmc->pcer); +} + + +void at91_seriald_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTA, 30, PUP); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTA, 31, 1); /* DTXD */ + /* writing SYS to PCER has no effect on AT91RM9200 */ +} + diff --git a/arch/arm/include/asm/arch-at91/at91rm9200.h b/arch/arm/include/asm/arch-at91/at91rm9200.h index fd774b4f33..42a32d3f15 100644 --- a/arch/arm/include/asm/arch-at91/at91rm9200.h +++ b/arch/arm/include/asm/arch-at91/at91rm9200.h @@ -21,9 +21,10 @@ #ifndef __AT91RM9200_H__ #define __AT91RM9200_H__ -#define CONFIG_AT91FAMILY /* it's a member of AT91 */ +#define CONFIG_AT91FAMILY /* it's a member of AT91 family */ +#define CONFIG_ARM920T /* it's an ARM920T Core */ #define CONFIG_ARCH_CPU_INIT /* we need arch_cpu_init() for hw timers */ -#define CONFIG_ARM920T /* This is an ARM920T Core */ +#define CONFIG_AT91_GPIO /* and require always gpio features */ /* Periperial Identifiers */ @@ -78,6 +79,10 @@ #define ATMEL_BASE_AIC 0xFFFFF000 #define ATMEL_BASE_DBGU 0xFFFFF200 #define ATMEL_BASE_PIO 0xFFFFF400 /* 4x 0x200 Offset */ +#define ATMEL_BASE_PIOA 0xFFFFF400 +#define ATMEL_BASE_PIOB 0xFFFFF600 +#define ATMEL_BASE_PIOC 0xFFFFF800 +#define ATMEL_BASE_PIOD 0xFFFFFA00 #define ATMEL_BASE_PMC 0xFFFFFC00 #define ATMEL_BASE_ST 0xFFFFFD00 #define ATMEL_BASE_RTC 0xFFFFFE00