From: Neal Frager Date: Tue, 4 Jun 2024 08:38:54 +0000 (+0100) Subject: arm64: zynqmp: Enable usb3 for k24 som X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d67558b358963be5e8e39a80b3d27ba9325df72f;p=u-boot.git arm64: zynqmp: Enable usb3 for k24 som This patch corrects the mio and pll configuration registers for using usb3 on the kd240 starter kit. Without this patch, the usb3 to sd card bridge does not initialize correctly and u-boot is unable to find the OS located on the kd240 starter kit sd card. In addition, this patch correctly configures mio76 and mio77 as gpio pins which are used as reset gpio pins on the kd240 starter kit. Signed-off-by: Neal Frager Link: https://lore.kernel.org/r/20240604083854.2033917-1-neal.frager@amd.com Signed-off-by: Michal Simek --- diff --git a/board/xilinx/zynqmp/zynqmp-sm-k24-revA/psu_init_gpl.c b/board/xilinx/zynqmp/zynqmp-sm-k24-revA/psu_init_gpl.c index 166e61431b..274203ffaa 100644 --- a/board/xilinx/zynqmp/zynqmp-sm-k24-revA/psu_init_gpl.c +++ b/board/xilinx/zynqmp/zynqmp-sm-k24-revA/psu_init_gpl.c @@ -528,8 +528,8 @@ static unsigned long psu_mio_init_data(void) psu_mask_write(0xFF180124, 0x000000FEU, 0x00000002U); psu_mask_write(0xFF180128, 0x000000FEU, 0x00000002U); psu_mask_write(0xFF18012C, 0x000000FEU, 0x00000002U); - psu_mask_write(0xFF180130, 0x000000FEU, 0x000000C0U); - psu_mask_write(0xFF180134, 0x000000FEU, 0x000000C0U); + psu_mask_write(0xFF180130, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF180134, 0x000000FEU, 0x00000000U); psu_mask_write(0xFF180204, 0xFFFFFFFFU, 0x50000000U); psu_mask_write(0xFF180208, 0xFFFFFFFFU, 0x00B02020U); psu_mask_write(0xFF18020C, 0x00003FFFU, 0x00000FC0U); @@ -569,21 +569,16 @@ static unsigned long psu_peripherals_init_data(void) psu_mask_write(0xFD1A0100, 0x0001807CU, 0x00000000U); psu_mask_write(0xFF5E0238, 0x001A0000U, 0x00000000U); psu_mask_write(0xFF5E023C, 0x0093C018U, 0x00000000U); - psu_mask_write(0xFF5E0230, 0x00000008U, 0x00000000U); + psu_mask_write(0xFF5E0230, 0x00000002U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00000001U, 0x00000000U); psu_mask_write(0xFF180390, 0x00000004U, 0x00000004U); psu_mask_write(0xFF5E023C, 0x00000400U, 0x00000000U); - psu_mask_write(0xFF5E0238, 0x00000040U, 0x00000000U); - psu_mask_write(0xFF180310, 0x00008000U, 0x00000000U); - psu_mask_write(0xFF180320, 0x33840000U, 0x02840000U); - psu_mask_write(0xFF18031C, 0x7FFE0000U, 0x64500000U); - psu_mask_write(0xFF180358, 0x00000008U, 0x00000008U); - psu_mask_write(0xFF180324, 0x03C00000U, 0x00000000U); + psu_mask_write(0xFF5E0238, 0x00000080U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00000400U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00008000U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00000010U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00007800U, 0x00000000U); - psu_mask_write(0xFF5E0238, 0x00000004U, 0x00000000U); + psu_mask_write(0xFF5E0238, 0x00000006U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00040000U, 0x00000000U); psu_mask_write(0xFF4B0024, 0x000000FFU, 0x000000FFU); psu_mask_write(0xFFCA5000, 0x00001FFFU, 0x00000000U); @@ -591,13 +586,15 @@ static unsigned long psu_peripherals_init_data(void) psu_mask_write(0xFFA60040, 0x80000000U, 0x80000000U); psu_mask_write(0xFF260020, 0xFFFFFFFFU, 0x05F5DD18U); psu_mask_write(0xFF260000, 0x00000001U, 0x00000001U); - psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000202U); + psu_mask_write(0xFF0A0284, 0x03FFFFFFU, 0x01000000U); + psu_mask_write(0xFF0A0288, 0x03FFFFFFU, 0x01000000U); + psu_mask_write(0xFF0A0014, 0x03FF03FFU, 0x02FF0100U); mask_delay(1); - psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000002U); + psu_mask_write(0xFF0A0014, 0x03FF03FFU, 0x02FF0000U); mask_delay(5); - psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000202U); + psu_mask_write(0xFF0A0014, 0x03FF03FFU, 0x02FF0100U); return 1; }