From: Rasmus Villemoes Date: Fri, 24 Mar 2023 08:09:22 +0000 (+0100) Subject: i2c: designware_i2c: remove apparently redundant read of 'i2c, speeds' DT property X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d600b0fcbbfe877f67fb8b89e4d09aeb376c01d1;p=u-boot.git i2c: designware_i2c: remove apparently redundant read of 'i2c, speeds' DT property This code first figures out if there is an i2c,speeds property, if so its size in u32s, and then reads the value into the local speeds[] array. Both 'size' and 'speeds' are completely unused thereafter. It's not at all clear what this is supposed to do. Of course, it could be seen as a sanity check that the DT node does have an i2c,speeds property with an appropriate number of elements, but for that one wouldn't actually need to read it into speeds[]. Also, I can't find anywhere else in the U-Boot code which makes use of values from that property (this is is the only C code referencing "i2c,speeds"), so it seems pointless to insist that it's there. Signed-off-by: Rasmus Villemoes --- diff --git a/drivers/i2c/designware_i2c_pci.c b/drivers/i2c/designware_i2c_pci.c index 46c2545f21..28495a3f42 100644 --- a/drivers/i2c/designware_i2c_pci.c +++ b/drivers/i2c/designware_i2c_pci.c @@ -147,9 +147,7 @@ static int dw_i2c_acpi_fill_ssdt(const struct udevice *dev, { struct dw_i2c_speed_config config; char path[ACPI_PATH_MAX]; - u32 speeds[4]; uint speed; - int size; int ret; /* If no device-tree node, ignore this since we assume it isn't used */ @@ -160,18 +158,6 @@ static int dw_i2c_acpi_fill_ssdt(const struct udevice *dev, if (ret) return log_msg_ret("path", ret); - size = dev_read_size(dev, "i2c,speeds"); - if (size < 0) - return log_msg_ret("i2c,speeds", -EINVAL); - - size /= sizeof(u32); - if (size > ARRAY_SIZE(speeds)) - return log_msg_ret("array", -E2BIG); - - ret = dev_read_u32_array(dev, "i2c,speeds", speeds, size); - if (ret) - return log_msg_ret("read", -E2BIG); - speed = dev_read_u32_default(dev, "clock-frequency", 100000); acpigen_write_scope(ctx, path); ret = dw_i2c_gen_speed_config(dev, speed, &config);