From: David Saada <David.Saada@ecitele.com>
Date: Mon, 31 Mar 2008 09:37:38 +0000 (-0700)
Subject: QE UEC: Add MII Commands
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d5d28fe4aad5f4535400647a5617c11039506467;p=u-boot.git

QE UEC: Add MII Commands

Add MII commands to the UEC driver. Note that once a UEC device is selected,
any device on its MDIO bus can be addressed.

Signed-off-by: David Saada <david.saada@ecitele.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
---

diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index d2c430b8a6..049a74d5cb 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -29,6 +29,7 @@
 #include "uccf.h"
 #include "uec.h"
 #include "uec_phy.h"
+#include "miiphy.h"
 
 #if defined(CONFIG_QE)
 
@@ -125,6 +126,17 @@ static uec_info_t eth4_uec_info = {
 };
 #endif
 
+#define MAXCONTROLLERS	(4)
+
+static struct eth_device *devlist[MAXCONTROLLERS];
+
+static int uec_miiphy_read(char *devname, unsigned char addr,
+			    unsigned char reg, unsigned short *value);
+static int uec_miiphy_write(char *devname, unsigned char addr,
+			     unsigned char reg, unsigned short value);
+u16 phy_read (struct uec_mii_info *mii_info, u16 regnum);
+void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val);
+
 static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
 {
 	uec_t		*uec_regs;
@@ -1334,6 +1346,8 @@ int uec_initialize(int index)
 		return -EINVAL;
 	}
 
+	devlist[index] = dev;
+
 	uec->uec_info = uec_info;
 
 	sprintf(dev->name, "FSL UEC%d", index);
@@ -1356,6 +1370,45 @@ int uec_initialize(int index)
 		return err;
 	}
 
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
+	&& !defined(BITBANGMII)
+	miiphy_register(dev->name, uec_miiphy_read, uec_miiphy_write);
+#endif
+
 	return 1;
 }
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
+	&& !defined(BITBANGMII)
+
+/*
+ * Read a MII PHY register.
+ *
+ * Returns:
+ *  0 on success
+ */
+static int uec_miiphy_read(char *devname, unsigned char addr,
+			    unsigned char reg, unsigned short *value)
+{
+	*value = uec_read_phy_reg(devlist[0], addr, reg);
+
+	return 0;
+}
+
+/*
+ * Write a MII PHY register.
+ *
+ * Returns:
+ *  0 on success
+ */
+static int uec_miiphy_write(char *devname, unsigned char addr,
+			     unsigned char reg, unsigned short value)
+{
+	uec_write_phy_reg(devlist[0], addr, reg, value);
+
+	return 0;
+}
+
+#endif
+
 #endif /* CONFIG_QE */