From: Andy Shevchenko Date: Tue, 20 Nov 2018 21:52:33 +0000 (+0200) Subject: dm: serial: Introduce ->getinfo() callback X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d5bb4f862b47ad9112132071ad18f9936494e307;p=u-boot.git dm: serial: Introduce ->getinfo() callback New callback will give a necessary information to fill up ACPI SPCR table, for example. Maybe used later for other purposes. Signed-off-by: Andy Shevchenko Reviewed-by: Simon Glass Change ADR_SPACE_SYSTEM_IO to SERIAL_ADDRESS_SPACE_IO to fix build error: Signed-off-by: Simon Glass --- diff --git a/drivers/serial/sandbox.c b/drivers/serial/sandbox.c index 76d26d3c59..33102fc872 100644 --- a/drivers/serial/sandbox.c +++ b/drivers/serial/sandbox.c @@ -188,6 +188,26 @@ static int sandbox_serial_setconfig(struct udevice *dev, uint serial_config) return 0; } +static int sandbox_serial_getinfo(struct udevice *dev, + struct serial_device_info *serial_info) +{ + struct serial_device_info info = { + .type = SERIAL_CHIP_UNKNOWN, + .addr_space = SERIAL_ADDRESS_SPACE_IO, + .addr = SERIAL_DEFAULT_ADDRESS, + .reg_width = 1, + .reg_offset = 0, + .reg_shift = 0, + }; + + if (!serial_info) + return -EINVAL; + + *serial_info = info; + + return 0; +} + #if CONFIG_IS_ENABLED(OF_CONTROL) static const char * const ansi_colour[] = { "black", "red", "green", "yellow", "blue", "megenta", "cyan", @@ -221,6 +241,7 @@ static const struct dm_serial_ops sandbox_serial_ops = { .getc = sandbox_serial_getc, .getconfig = sandbox_serial_getconfig, .setconfig = sandbox_serial_setconfig, + .getinfo = sandbox_serial_getinfo, }; static const struct udevice_id sandbox_serial_ids[] = { diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index 51ae1763fb..ffcd6d15af 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -322,6 +322,25 @@ int serial_setconfig(uint config) return 0; } +int serial_getinfo(struct serial_device_info *info) +{ + struct dm_serial_ops *ops; + + if (!gd->cur_serial_dev) + return -ENODEV; + + if (!info) + return -EINVAL; + + info->baudrate = gd->baudrate; + + ops = serial_get_ops(gd->cur_serial_dev); + if (ops->getinfo) + return ops->getinfo(gd->cur_serial_dev, info); + + return -EINVAL; +} + void serial_stdio_init(void) { } @@ -441,6 +460,8 @@ static int serial_post_probe(struct udevice *dev) if (ops->loop) ops->loop += gd->reloc_off; #endif + if (ops->getinfo) + ops->getinfo += gd->reloc_off; #endif /* Set the baud rate */ if (ops->setbrg) { diff --git a/include/common.h b/include/common.h index 57478365c7..20c99da1aa 100644 --- a/include/common.h +++ b/include/common.h @@ -357,6 +357,8 @@ void smp_set_core_boot_addr(unsigned long addr, int corenr); void smp_kick_all_cpus(void); /* $(CPU)/serial.c */ +struct serial_device_info; + int serial_init (void); void serial_setbrg (void); void serial_putc (const char); @@ -366,6 +368,7 @@ int serial_getc (void); int serial_tstc (void); int serial_getconfig(uint *config); int serial_setconfig(uint config); +int serial_getinfo(struct serial_device_info *info); /* $(CPU)/speed.c */ int get_clocks (void); diff --git a/include/serial.h b/include/serial.h index de21514c0c..c1a9fee250 100644 --- a/include/serial.h +++ b/include/serial.h @@ -118,6 +118,39 @@ enum serial_stop { SERIAL_8_BITS << SERIAL_BITS_SHIFT | \ SERIAL_ONE_STOP << SERIAL_STOP_SHIFT) +enum serial_chip_type { + SERIAL_CHIP_UNKNOWN = -1, + SERIAL_CHIP_16550_COMPATIBLE, +}; + +enum adr_space_type { + SERIAL_ADDRESS_SPACE_MEMORY = 0, + SERIAL_ADDRESS_SPACE_IO, +}; + +/** + * struct serial_device_info - structure to hold serial device info + * + * @type: type of the UART chip + * @addr_space: address space to access the registers + * @addr: physical address of the registers + * @reg_width: size (in bytes) of the IO accesses to the registers + * @reg_offset: offset to apply to the @addr from the start of the registers + * @reg_shift: quantity to shift the register offsets by + * @baudrate: baud rate + */ +struct serial_device_info { + enum serial_chip_type type; + enum adr_space_type addr_space; + ulong addr; + u8 reg_width; + u8 reg_offset; + u8 reg_shift; + unsigned int baudrate; +}; + +#define SERIAL_DEFAULT_ADDRESS 0xBADACCE5 + /** * struct struct dm_serial_ops - Driver model serial operations * @@ -219,6 +252,13 @@ struct dm_serial_ops { * @return 0 if OK, -ve on error */ int (*setconfig)(struct udevice *dev, uint serial_config); + /** + * getinfo() - Get serial device information + * + * @dev: Device pointer + * @info: struct serial_device_info to fill + */ + int (*getinfo)(struct udevice *dev, struct serial_device_info *info); }; /** diff --git a/test/dm/serial.c b/test/dm/serial.c index 7a1a1526a4..19a15d5d95 100644 --- a/test/dm/serial.c +++ b/test/dm/serial.c @@ -11,6 +11,7 @@ static int dm_test_serial(struct unit_test_state *uts) { + struct serial_device_info info_serial = {0}; struct udevice *dev_serial; uint value_serial; @@ -25,10 +26,14 @@ static int dm_test_serial(struct unit_test_state *uts) ut_assertok(serial_setconfig(SERIAL_DEFAULT_CONFIG)); ut_assertok(serial_getconfig(&value_serial)); ut_assert(value_serial == SERIAL_DEFAULT_CONFIG); + ut_assertok(serial_getinfo(&info_serial)); + ut_assert(info_serial.type == SERIAL_CHIP_UNKNOWN); + ut_assert(info_serial.addr == SERIAL_DEFAULT_ADDRESS); /* * test with a parameter which is NULL pointer */ ut_asserteq(-EINVAL, serial_getconfig(NULL)); + ut_asserteq(-EINVAL, serial_getinfo(NULL)); /* * test with a serial config which is not supported by * sandbox_serial driver: test with wrong parity