From: Simon Glass Date: Fri, 11 Jul 2014 04:23:28 +0000 (-0600) Subject: Add a simple malloc() implementation for pre-relocation X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d59476b6446799c21e64147d86483140154c1886;p=u-boot.git Add a simple malloc() implementation for pre-relocation If we are to have driver model before relocation we need to support some way of calling memory allocation routines. The standard malloc() is pretty complicated: 1. It uses some BSS memory for its state, and BSS is not available before relocation 2. It supports algorithms for reducing memory fragmentation and improving performace of free(). Before relocation we could happily just not support free(). 3. It includes about 4KB of code (Thumb 2) and 1KB of data. However since this has been loaded anyway this is not really a problem. The simplest way to support pre-relocation malloc() is to reserve an area of memory and allocate it in increasing blocks as needed. This implementation does this. To enable it, you need to define the size of the malloc() pool as described in the README. It will be located above the pre-relocation stack on supported architectures. Note that this implementation is only useful on machines which have some memory available before dram_init() is called - this includes those that do no DRAM init (like tegra) and those that do it in SPL (quite a few boards). Enabling driver model preior to relocation for the rest of the boards is left for a later exercise. Signed-off-by: Simon Glass --- diff --git a/README b/README index 4ac7399698..11e9d31285 100644 --- a/README +++ b/README @@ -3736,6 +3736,19 @@ Configuration Settings: - CONFIG_SYS_MALLOC_LEN: Size of DRAM reserved for malloc() use. +- CONFIG_SYS_MALLOC_F_LEN + Size of the malloc() pool for use before relocation. If + this is defined, then a very simple malloc() implementation + will become available before relocation. The address is just + below the global data, and the stack is moved down to make + space. + + This feature allocates regions with increasing addresses + within the region. calloc() is supported, but realloc() + is not available. free() is supported but does nothing. + The memory will be freed (or in fact just forgotton) when + U-Boot relocates itself. + - CONFIG_SYS_BOOTM_LEN: Normally compressed uImages are limited to an uncompressed size of 8 MBytes. If this is not enough, diff --git a/common/board_f.c b/common/board_f.c index bdab38e89d..6b2e277bd7 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -767,6 +767,17 @@ static int mark_bootstage(void) return 0; } +static int initf_malloc(void) +{ +#ifdef CONFIG_SYS_MALLOC_F_LEN + assert(gd->malloc_base); /* Set up by crt0.S */ + gd->malloc_limit = gd->malloc_base + CONFIG_SYS_MALLOC_F_LEN; + gd->malloc_ptr = 0; +#endif + + return 0; +} + static init_fnc_t init_sequence_f[] = { #ifdef CONFIG_SANDBOX setup_ram_buf, @@ -824,6 +835,7 @@ static init_fnc_t init_sequence_f[] = { sdram_adjust_866, init_timebase, #endif + initf_malloc, init_baud_rate, /* initialze baudrate settings */ serial_init, /* serial communications setup */ console_init_f, /* stage 1 init of console */ diff --git a/common/board_r.c b/common/board_r.c index 4479acbb72..2298ba5761 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -259,6 +259,10 @@ static int initr_malloc(void) { ulong malloc_start; +#ifdef CONFIG_SYS_MALLOC_F_LEN + debug("Pre-reloc malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr, + gd->malloc_ptr / 1024); +#endif /* The malloc area is immediately below the monitor copy in DRAM */ malloc_start = gd->relocaddr - TOTAL_MALLOC_LEN; mem_malloc_init((ulong)map_sysmem(malloc_start, TOTAL_MALLOC_LEN), diff --git a/common/dlmalloc.c b/common/dlmalloc.c index d1cd561cb8..26ba8fd622 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -930,6 +930,8 @@ struct mallinfo mALLINFo(); #endif /* 0 */ /* Moved to malloc.h */ #include +#include + #ifdef DEBUG #if __STD_C static void malloc_update_mallinfo (void); @@ -2174,6 +2176,20 @@ Void_t* mALLOc(bytes) size_t bytes; INTERNAL_SIZE_T nb; +#ifdef CONFIG_SYS_MALLOC_F_LEN + if (!(gd->flags & GD_FLG_RELOC)) { + ulong new_ptr; + void *ptr; + + new_ptr = gd->malloc_ptr + bytes; + if (new_ptr > gd->malloc_limit) + panic("Out of pre-reloc memory"); + ptr = map_sysmem(gd->malloc_base + gd->malloc_ptr, bytes); + gd->malloc_ptr = ALIGN(new_ptr, sizeof(new_ptr)); + return ptr; + } +#endif + /* check if mem_malloc_init() was run */ if ((mem_malloc_start == 0) && (mem_malloc_end == 0)) { /* not initialized yet */ @@ -2437,6 +2453,12 @@ void fREe(mem) Void_t* mem; mchunkptr fwd; /* misc temp for linking */ int islr; /* track whether merging with last_remainder */ +#ifdef CONFIG_SYS_MALLOC_F_LEN + /* free() is a no-op - all the memory will be freed on relocation */ + if (!(gd->flags & GD_FLG_RELOC)) + return; +#endif + if (mem == NULL) /* free(0) has no effect */ return; @@ -2588,6 +2610,13 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; /* realloc of null is supposed to be same as malloc */ if (oldmem == NULL) return mALLOc(bytes); +#ifdef CONFIG_SYS_MALLOC_F_LEN + if (!(gd->flags & GD_FLG_RELOC)) { + /* This is harder to support and should not be needed */ + panic("pre-reloc realloc() is not supported"); + } +#endif + newp = oldp = mem2chunk(oldmem); newsize = oldsize = chunksize(oldp); @@ -2933,6 +2962,12 @@ Void_t* cALLOc(n, elem_size) size_t n; size_t elem_size; return NULL; else { +#ifdef CONFIG_SYS_MALLOC_F_LEN + if (!(gd->flags & GD_FLG_RELOC)) { + MALLOC_ZERO(mem, sz); + return mem; + } +#endif p = mem2chunk(mem); /* Two optional cases in which clearing not necessary */ diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index 2850ed8a69..f6a2a2068a 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -85,6 +85,11 @@ typedef struct global_data { #endif unsigned long timebase_h; unsigned long timebase_l; +#ifdef CONFIG_SYS_MALLOC_F_LEN + unsigned long malloc_base; /* base address of early malloc() */ + unsigned long malloc_limit; /* limit address */ + unsigned long malloc_ptr; /* current address */ +#endif struct arch_global_data arch; /* architecture-specific data */ } gd_t; #endif diff --git a/lib/asm-offsets.c b/lib/asm-offsets.c index 6ea7b03ad4..129bc3e2af 100644 --- a/lib/asm-offsets.c +++ b/lib/asm-offsets.c @@ -28,6 +28,9 @@ int main(void) DEFINE(GD_SIZE, sizeof(struct global_data)); DEFINE(GD_BD, offsetof(struct global_data, bd)); +#ifdef CONFIG_SYS_MALLOC_F_LEN + DEFINE(GD_MALLOC_BASE, offsetof(struct global_data, malloc_base)); +#endif #if defined(CONFIG_ARM)