From: York Sun Date: Fri, 26 Aug 2011 18:32:45 +0000 (-0700) Subject: powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d4b9106609a67617d8cef3bb6bce124974865388;p=u-boot.git powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driver Update MPC8349EMDS to use unified DDR driver instead of spd_sdram.c. The unified driver can initialize data using DDR controller. No need to use DMA if just to initialze for ECC. Signed-off-by: York Sun Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- diff --git a/board/freescale/mpc8349emds/Makefile b/board/freescale/mpc8349emds/Makefile index 4f76eab23e..601c3bf7b0 100644 --- a/board/freescale/mpc8349emds/Makefile +++ b/board/freescale/mpc8349emds/Makefile @@ -27,6 +27,7 @@ LIB = $(obj)lib$(BOARD).o COBJS-y += $(BOARD).o COBJS-$(CONFIG_PCI) += pci.o +COBJS-$(CONFIG_FSL_DDR2) += ddr.o COBJS := $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/freescale/mpc8349emds/ddr.c b/board/freescale/mpc8349emds/ddr.c new file mode 100644 index 0000000000..0209c1eca9 --- /dev/null +++ b/board/freescale/mpc8349emds/ddr.c @@ -0,0 +1,107 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#include +#include + +struct board_specific_parameters { + u32 datarate_mhz_low; + u32 datarate_mhz_high; + u32 n_ranks; + u32 clk_adjust; + u32 cpo; + u32 write_data_delay; + u32 force_2T; +}; + +const struct board_specific_parameters board_specific_parameters_udimm[][20] = { + { + /* + * memory controller 0 + * lo| hi| num| clk| cpo|wrdata|2T + * mhz| mhz|ranks|adjst| | delay| + */ + { 0, 300, 2, 4, 4, 2, 0}, + {301, 365, 2, 4, 6, 2, 0}, + {366, 450, 2, 4, 7, 2, 0}, + {451, 850, 2, 4, 31, 2, 0}, + { 0, 300, 1, 4, 4, 2, 0}, + {301, 365, 1, 4, 6, 2, 0}, + {366, 450, 1, 4, 7, 2, 0}, + {451, 850, 1, 4, 31, 2, 0} + } +}; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const struct board_specific_parameters *pbsp; + u32 num_params; + u32 i, dimm_num; + ulong ddr_freq; + + if (ctrl_num != 0) /* we have only one controller */ + return; + for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { + if (pdimm[i].n_ranks) + break; + } + if (i >= CONFIG_DIMM_SLOTS_PER_CTLR) /* no DIMM */ + return; + + dimm_num = i; + pbsp = &(board_specific_parameters_udimm[ctrl_num][0]); + num_params = sizeof(board_specific_parameters_udimm[ctrl_num]) / + sizeof(board_specific_parameters_udimm[0][0]); + + /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + for (i = 0; i < num_params; i++) { + if (ddr_freq >= pbsp->datarate_mhz_low && + ddr_freq <= pbsp->datarate_mhz_high && + pdimm[dimm_num].n_ranks == pbsp->n_ranks) { + popts->clk_adjust = pbsp->clk_adjust; + popts->cpo_override = pbsp->cpo; + popts->write_data_delay = pbsp->write_data_delay; + popts->twoT_en = pbsp->force_2T; + break; + } + pbsp++; + } + + if (i == num_params) { + printf("Warning: board specific timing not found " + "for data rate %lu MT/s!\n", ddr_freq); + } + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + popts->DQS_config = 0; /* only true DQS signal is used on board */ +} diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index 365ac3792f..620540f830 100644 --- a/board/freescale/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -29,7 +29,11 @@ #include #include #include +#ifdef CONFIG_FSL_DDR2 +#include +#else #include +#endif #if defined(CONFIG_OF_LIBFDT) #include @@ -62,7 +66,7 @@ int board_early_init_f (void) phys_size_t initdram (int board_type) { volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - u32 msize = 0; + phys_size_t msize = 0; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return -1; @@ -70,24 +74,24 @@ phys_size_t initdram (int board_type) /* DDR SDRAM - Main SODIMM */ im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) - msize = spd_sdram(); +#ifndef CONFIG_FSL_DDR2 + msize = spd_sdram() * 1024 * 1024; +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + ddr_enable_ecc(msize); +#endif +#else + msize = fsl_ddr_sdram(); +#endif #else - msize = fixed_sdram(); + msize = fixed_sdram() * 1024 * 1024; #endif /* * Initialize SDRAM if it is on local bus. */ sdram_init(); -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(msize * 1024 * 1024); -#endif - /* return total bus SDRAM size(bytes) -- DDR */ - return (msize * 1024 * 1024); + return msize; } #if !defined(CONFIG_SPD_EEPROM) diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 45b6b5f854..da2b11da8e 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -77,6 +77,22 @@ #define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ +/* + * define CONFIG_FSL_DDR2 to use unified DDR driver + * undefine it to use old spd_sdram.c + */ +#define CONFIG_FSL_DDR2 +#ifdef CONFIG_FSL_DDR2 +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS1 0x52 +#define SPD_EEPROM_ADDRESS2 0x51 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_DIMM_SLOTS_PER_CTLR 2 +#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xDeadBeef +#endif + /* * 32-bit data path mode. *