From: Kever Yang Date: Thu, 11 Jul 2019 08:42:16 +0000 (+0200) Subject: rockchip: clk: add px30 clock driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d49a526750754cc93ffaa1182cfdf7ffa723e4b6;p=u-boot.git rockchip: clk: add px30 clock driver The px30 contains 2 separate clock controllers, pmucru and cru. Add drivers for them. Signed-off-by: Kever Yang Signed-off-by: Heiko Stuebner Reviewed-by: Kever Yang --- diff --git a/arch/arm/include/asm/arch-rockchip/cru_px30.h b/arch/arm/include/asm/arch-rockchip/cru_px30.h new file mode 100644 index 0000000000..7d9fd181ac --- /dev/null +++ b/arch/arm/include/asm/arch-rockchip/cru_px30.h @@ -0,0 +1,432 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2017 Rockchip Electronics Co., Ltd. + */ +#ifndef _ASM_ARCH_CRU_PX30_H +#define _ASM_ARCH_CRU_PX30_H + +#include + +#define MHz 1000000 +#define KHz 1000 +#define OSC_HZ (24 * MHz) + +#define APLL_HZ (600 * MHz) +#define GPLL_HZ (1200 * MHz) +#define NPLL_HZ (1188 * MHz) +#define ACLK_BUS_HZ (200 * MHz) +#define HCLK_BUS_HZ (150 * MHz) +#define PCLK_BUS_HZ (100 * MHz) +#define ACLK_PERI_HZ (200 * MHz) +#define HCLK_PERI_HZ (150 * MHz) +#define PCLK_PMU_HZ (100 * MHz) + +/* PX30 pll id */ +enum px30_pll_id { + APLL, + DPLL, + CPLL, + NPLL, + GPLL, + PLL_COUNT, +}; + +struct px30_clk_priv { + struct px30_cru *cru; + ulong gpll_hz; +}; + +struct px30_pmuclk_priv { + struct px30_pmucru *pmucru; + ulong gpll_hz; +}; + +struct px30_pll { + unsigned int con0; + unsigned int con1; + unsigned int con2; + unsigned int con3; + unsigned int con4; + unsigned int reserved0[3]; +}; + +struct px30_cru { + struct px30_pll pll[4]; + unsigned int reserved1[8]; + unsigned int mode; + unsigned int misc; + unsigned int reserved2[2]; + unsigned int glb_cnt_th; + unsigned int glb_rst_st; + unsigned int glb_srst_fst; + unsigned int glb_srst_snd; + unsigned int glb_rst_con; + unsigned int reserved3[7]; + unsigned int hwffc_con0; + unsigned int reserved4; + unsigned int hwffc_th; + unsigned int hwffc_intst; + unsigned int apll_con0_s; + unsigned int apll_con1_s; + unsigned int clksel_con0_s; + unsigned int reserved5; + unsigned int clksel_con[60]; + unsigned int reserved6[4]; + unsigned int clkgate_con[18]; + unsigned int reserved7[(0x280 - 0x244) / 4 - 1]; + unsigned int ssgtbl[32]; + unsigned int softrst_con[12]; + unsigned int reserved8[(0x380 - 0x32c) / 4 - 1]; + unsigned int sdmmc_con[2]; + unsigned int sdio_con[2]; + unsigned int emmc_con[2]; + unsigned int reserved9[(0x400 - 0x394) / 4 - 1]; + unsigned int autocs_con[8]; +}; + +check_member(px30_cru, autocs_con[7], 0x41c); + +struct px30_pmucru { + struct px30_pll pll; + unsigned int pmu_mode; + unsigned int reserved1[7]; + unsigned int pmu_clksel_con[6]; + unsigned int reserved2[10]; + unsigned int pmu_clkgate_con[2]; + unsigned int reserved3[14]; + unsigned int pmu_autocs_con[2]; +}; + +check_member(px30_pmucru, pmu_autocs_con[1], 0xc4); + +struct pll_rate_table { + unsigned long rate; + unsigned int fbdiv; + unsigned int postdiv1; + unsigned int refdiv; + unsigned int postdiv2; + unsigned int dsmpd; + unsigned int frac; +}; + +struct cpu_rate_table { + unsigned long rate; + unsigned int aclk_div; + unsigned int pclk_div; +}; + +enum { + /* PLLCON0*/ + PLL_BP_SHIFT = 15, + PLL_POSTDIV1_SHIFT = 12, + PLL_POSTDIV1_MASK = 7 << PLL_POSTDIV1_SHIFT, + PLL_FBDIV_SHIFT = 0, + PLL_FBDIV_MASK = 0xfff, + + /* PLLCON1 */ + PLL_PDSEL_SHIFT = 15, + PLL_PD1_SHIFT = 14, + PLL_PD_SHIFT = 13, + PLL_PD_MASK = 1 << PLL_PD_SHIFT, + PLL_DSMPD_SHIFT = 12, + PLL_DSMPD_MASK = 1 << PLL_DSMPD_SHIFT, + PLL_LOCK_STATUS_SHIFT = 10, + PLL_LOCK_STATUS_MASK = 1 << PLL_LOCK_STATUS_SHIFT, + PLL_POSTDIV2_SHIFT = 6, + PLL_POSTDIV2_MASK = 7 << PLL_POSTDIV2_SHIFT, + PLL_REFDIV_SHIFT = 0, + PLL_REFDIV_MASK = 0x3f, + + /* PLLCON2 */ + PLL_FOUT4PHASEPD_SHIFT = 27, + PLL_FOUTVCOPD_SHIFT = 26, + PLL_FOUTPOSTDIVPD_SHIFT = 25, + PLL_DACPD_SHIFT = 24, + PLL_FRAC_DIV = 0xffffff, + + /* CRU_MODE */ + PLLMUX_FROM_XIN24M = 0, + PLLMUX_FROM_PLL, + PLLMUX_FROM_RTC32K, + USBPHY480M_MODE_SHIFT = 8, + USBPHY480M_MODE_MASK = 3 << USBPHY480M_MODE_SHIFT, + NPLL_MODE_SHIFT = 6, + NPLL_MODE_MASK = 3 << NPLL_MODE_SHIFT, + DPLL_MODE_SHIFT = 4, + DPLL_MODE_MASK = 3 << DPLL_MODE_SHIFT, + CPLL_MODE_SHIFT = 2, + CPLL_MODE_MASK = 3 << CPLL_MODE_SHIFT, + APLL_MODE_SHIFT = 0, + APLL_MODE_MASK = 3 << APLL_MODE_SHIFT, + + /* CRU_CLK_SEL0_CON */ + CORE_ACLK_DIV_SHIFT = 12, + CORE_ACLK_DIV_MASK = 0x07 << CORE_ACLK_DIV_SHIFT, + CORE_DBG_DIV_SHIFT = 8, + CORE_DBG_DIV_MASK = 0x03 << CORE_DBG_DIV_SHIFT, + CORE_CLK_PLL_SEL_SHIFT = 7, + CORE_CLK_PLL_SEL_MASK = 1 << CORE_CLK_PLL_SEL_SHIFT, + CORE_CLK_PLL_SEL_APLL = 0, + CORE_CLK_PLL_SEL_GPLL, + CORE_DIV_CON_SHIFT = 0, + CORE_DIV_CON_MASK = 0x0f << CORE_DIV_CON_SHIFT, + + /* CRU_CLK_SEL3_CON */ + ACLK_VO_PLL_SHIFT = 6, + ACLK_VO_PLL_MASK = 0x3 << ACLK_VO_PLL_SHIFT, + ACLK_VO_SEL_GPLL = 0, + ACLK_VO_SEL_CPLL, + ACLK_VO_SEL_NPLL, + ACLK_VO_DIV_SHIFT = 0, + ACLK_VO_DIV_MASK = 0x1f << ACLK_VO_DIV_SHIFT, + + /* CRU_CLK_SEL5_CON */ + DCLK_VOPB_SEL_SHIFT = 14, + DCLK_VOPB_SEL_MASK = 0x3 << DCLK_VOPB_SEL_SHIFT, + DCLK_VOPB_SEL_DIVOUT = 0, + DCLK_VOPB_SEL_FRACOUT, + DCLK_VOPB_SEL_24M, + DCLK_VOPB_PLL_SEL_SHIFT = 11, + DCLK_VOPB_PLL_SEL_MASK = 0x1 << DCLK_VOPB_PLL_SEL_SHIFT, + DCLK_VOPB_PLL_SEL_CPLL = 0, + DCLK_VOPB_PLL_SEL_NPLL, + DCLK_VOPB_DIV_SHIFT = 0, + DCLK_VOPB_DIV_MASK = 0xff, + + /* CRU_CLK_SEL8_CON */ + DCLK_VOPL_SEL_SHIFT = 14, + DCLK_VOPL_SEL_MASK = 0x3 << DCLK_VOPL_SEL_SHIFT, + DCLK_VOPL_SEL_DIVOUT = 0, + DCLK_VOPL_SEL_FRACOUT, + DCLK_VOPL_SEL_24M, + DCLK_VOPL_PLL_SEL_SHIFT = 11, + DCLK_VOPL_PLL_SEL_MASK = 0x1 << DCLK_VOPL_PLL_SEL_SHIFT, + DCLK_VOPL_PLL_SEL_NPLL = 0, + DCLK_VOPL_PLL_SEL_CPLL, + DCLK_VOPL_DIV_SHIFT = 0, + DCLK_VOPL_DIV_MASK = 0xff, + + /* CRU_CLK_SEL14_CON */ + PERI_PLL_SEL_SHIFT = 15, + PERI_PLL_SEL_MASK = 3 << PERI_PLL_SEL_SHIFT, + PERI_PLL_GPLL = 0, + PERI_PLL_CPLL, + PERI_HCLK_DIV_SHIFT = 8, + PERI_HCLK_DIV_MASK = 0x1f << PERI_HCLK_DIV_SHIFT, + PERI_ACLK_DIV_SHIFT = 0, + PERI_ACLK_DIV_MASK = 0x1f << PERI_ACLK_DIV_SHIFT, + + /* CRU_CLKSEL15_CON */ + NANDC_CLK_SEL_SHIFT = 15, + NANDC_CLK_SEL_MASK = 0x1 << NANDC_CLK_SEL_SHIFT, + NANDC_CLK_SEL_NANDC = 0, + NANDC_CLK_SEL_NANDC_DIV50, + NANDC_DIV50_SHIFT = 8, + NANDC_DIV50_MASK = 0x1f << NANDC_DIV50_SHIFT, + NANDC_PLL_SHIFT = 6, + NANDC_PLL_MASK = 0x3 << NANDC_PLL_SHIFT, + NANDC_SEL_GPLL = 0, + NANDC_SEL_CPLL, + NANDC_SEL_NPLL, + NANDC_DIV_SHIFT = 0, + NANDC_DIV_MASK = 0x1f << NANDC_DIV_SHIFT, + + /* CRU_CLKSEL20_CON */ + EMMC_PLL_SHIFT = 14, + EMMC_PLL_MASK = 3 << EMMC_PLL_SHIFT, + EMMC_SEL_GPLL = 0, + EMMC_SEL_CPLL, + EMMC_SEL_NPLL, + EMMC_SEL_24M, + EMMC_DIV_SHIFT = 0, + EMMC_DIV_MASK = 0xff << EMMC_DIV_SHIFT, + + /* CRU_CLKSEL21_CON */ + EMMC_CLK_SEL_SHIFT = 15, + EMMC_CLK_SEL_MASK = 1 << EMMC_CLK_SEL_SHIFT, + EMMC_CLK_SEL_EMMC = 0, + EMMC_CLK_SEL_EMMC_DIV50, + EMMC_DIV50_SHIFT = 0, + EMMC_DIV50_MASK = 0xff << EMMC_DIV_SHIFT, + + /* CRU_CLKSEL22_CON */ + GMAC_PLL_SEL_SHIFT = 14, + GMAC_PLL_SEL_MASK = 3 << GMAC_PLL_SEL_SHIFT, + GMAC_PLL_SEL_GPLL = 0, + GMAC_PLL_SEL_CPLL, + GMAC_PLL_SEL_NPLL, + CLK_GMAC_DIV_SHIFT = 8, + CLK_GMAC_DIV_MASK = 0x1f << CLK_GMAC_DIV_SHIFT, + SFC_PLL_SEL_SHIFT = 7, + SFC_PLL_SEL_MASK = 1 << SFC_PLL_SEL_SHIFT, + SFC_DIV_CON_SHIFT = 0, + SFC_DIV_CON_MASK = 0x7f, + + /* CRU_CLK_SEL23_CON */ + BUS_PLL_SEL_SHIFT = 15, + BUS_PLL_SEL_MASK = 1 << BUS_PLL_SEL_SHIFT, + BUS_PLL_SEL_GPLL = 0, + BUS_PLL_SEL_CPLL, + BUS_ACLK_DIV_SHIFT = 8, + BUS_ACLK_DIV_MASK = 0x1f << BUS_ACLK_DIV_SHIFT, + RMII_CLK_SEL_SHIFT = 7, + RMII_CLK_SEL_MASK = 1 << RMII_CLK_SEL_SHIFT, + RMII_CLK_SEL_10M = 0, + RMII_CLK_SEL_100M, + RMII_EXTCLK_SEL_SHIFT = 6, + RMII_EXTCLK_SEL_MASK = 1 << RMII_EXTCLK_SEL_SHIFT, + RMII_EXTCLK_SEL_INT = 0, + RMII_EXTCLK_SEL_EXT, + PCLK_GMAC_DIV_SHIFT = 0, + PCLK_GMAC_DIV_MASK = 0x0f << PCLK_GMAC_DIV_SHIFT, + + /* CRU_CLK_SEL24_CON */ + BUS_PCLK_DIV_SHIFT = 8, + BUS_PCLK_DIV_MASK = 3 << BUS_PCLK_DIV_SHIFT, + BUS_HCLK_DIV_SHIFT = 0, + BUS_HCLK_DIV_MASK = 0x1f << BUS_HCLK_DIV_SHIFT, + + /* CRU_CLK_SEL25_CON */ + CRYPTO_APK_SEL_SHIFT = 14, + CRYPTO_APK_PLL_SEL_MASK = 3 << CRYPTO_APK_SEL_SHIFT, + CRYPTO_PLL_SEL_GPLL = 0, + CRYPTO_PLL_SEL_CPLL, + CRYPTO_PLL_SEL_NPLL = 0, + CRYPTO_APK_DIV_SHIFT = 8, + CRYPTO_APK_DIV_MASK = 0x1f << CRYPTO_APK_DIV_SHIFT, + CRYPTO_PLL_SEL_SHIFT = 6, + CRYPTO_PLL_SEL_MASK = 3 << CRYPTO_PLL_SEL_SHIFT, + CRYPTO_DIV_SHIFT = 0, + CRYPTO_DIV_MASK = 0x1f << CRYPTO_DIV_SHIFT, + + /* CRU_CLK_SEL30_CON */ + CLK_I2S1_DIV_CON_MASK = 0x7f, + CLK_I2S1_PLL_SEL_MASK = 0X1 << 8, + CLK_I2S1_PLL_SEL_GPLL = 0X0 << 8, + CLK_I2S1_PLL_SEL_NPLL = 0X1 << 8, + CLK_I2S1_SEL_MASK = 0x3 << 10, + CLK_I2S1_SEL_I2S1 = 0x0 << 10, + CLK_I2S1_SEL_FRAC = 0x1 << 10, + CLK_I2S1_SEL_MCLK_IN = 0x2 << 10, + CLK_I2S1_SEL_OSC = 0x3 << 10, + CLK_I2S1_OUT_SEL_MASK = 0x1 << 15, + CLK_I2S1_OUT_SEL_I2S1 = 0x0 << 15, + CLK_I2S1_OUT_SEL_OSC = 0x1 << 15, + + /* CRU_CLK_SEL31_CON */ + CLK_I2S1_FRAC_NUMERATOR_SHIFT = 16, + CLK_I2S1_FRAC_NUMERATOR_MASK = 0xffff << 16, + CLK_I2S1_FRAC_DENOMINATOR_SHIFT = 0, + CLK_I2S1_FRAC_DENOMINATOR_MASK = 0xffff, + + /* CRU_CLK_SEL34_CON */ + UART1_PLL_SEL_SHIFT = 14, + UART1_PLL_SEL_MASK = 3 << UART1_PLL_SEL_SHIFT, + UART1_PLL_SEL_GPLL = 0, + UART1_PLL_SEL_24M, + UART1_PLL_SEL_480M, + UART1_PLL_SEL_NPLL, + UART1_DIV_CON_SHIFT = 0, + UART1_DIV_CON_MASK = 0x1f << UART1_DIV_CON_SHIFT, + + /* CRU_CLK_SEL35_CON */ + UART1_CLK_SEL_SHIFT = 14, + UART1_CLK_SEL_MASK = 3 << UART1_PLL_SEL_SHIFT, + UART1_CLK_SEL_UART1 = 0, + UART1_CLK_SEL_UART1_NP5, + UART1_CLK_SEL_UART1_FRAC, + UART1_DIVNP5_SHIFT = 0, + UART1_DIVNP5_MASK = 0x1f << UART1_DIVNP5_SHIFT, + + /* CRU_CLK_SEL37_CON */ + UART2_PLL_SEL_SHIFT = 14, + UART2_PLL_SEL_MASK = 3 << UART2_PLL_SEL_SHIFT, + UART2_PLL_SEL_GPLL = 0, + UART2_PLL_SEL_24M, + UART2_PLL_SEL_480M, + UART2_PLL_SEL_NPLL, + UART2_DIV_CON_SHIFT = 0, + UART2_DIV_CON_MASK = 0x1f << UART2_DIV_CON_SHIFT, + + /* CRU_CLK_SEL38_CON */ + UART2_CLK_SEL_SHIFT = 14, + UART2_CLK_SEL_MASK = 3 << UART2_PLL_SEL_SHIFT, + UART2_CLK_SEL_UART2 = 0, + UART2_CLK_SEL_UART2_NP5, + UART2_CLK_SEL_UART2_FRAC, + UART2_DIVNP5_SHIFT = 0, + UART2_DIVNP5_MASK = 0x1f << UART2_DIVNP5_SHIFT, + + /* CRU_CLK_SEL46_CON */ + UART5_PLL_SEL_SHIFT = 14, + UART5_PLL_SEL_MASK = 3 << UART5_PLL_SEL_SHIFT, + UART5_PLL_SEL_GPLL = 0, + UART5_PLL_SEL_24M, + UART5_PLL_SEL_480M, + UART5_PLL_SEL_NPLL, + UART5_DIV_CON_SHIFT = 0, + UART5_DIV_CON_MASK = 0x1f << UART5_DIV_CON_SHIFT, + + /* CRU_CLK_SEL47_CON */ + UART5_CLK_SEL_SHIFT = 14, + UART5_CLK_SEL_MASK = 3 << UART5_PLL_SEL_SHIFT, + UART5_CLK_SEL_UART5 = 0, + UART5_CLK_SEL_UART5_NP5, + UART5_CLK_SEL_UART5_FRAC, + UART5_DIVNP5_SHIFT = 0, + UART5_DIVNP5_MASK = 0x1f << UART5_DIVNP5_SHIFT, + + /* CRU_CLK_SEL49_CON */ + CLK_I2C_PLL_SEL_GPLL = 0, + CLK_I2C_PLL_SEL_24M, + CLK_I2C_DIV_CON_MASK = 0x7f, + CLK_I2C_PLL_SEL_MASK = 1, + CLK_I2C1_PLL_SEL_SHIFT = 15, + CLK_I2C1_DIV_CON_SHIFT = 8, + CLK_I2C0_PLL_SEL_SHIFT = 7, + CLK_I2C0_DIV_CON_SHIFT = 0, + + /* CRU_CLK_SEL50_CON */ + CLK_I2C3_PLL_SEL_SHIFT = 15, + CLK_I2C3_DIV_CON_SHIFT = 8, + CLK_I2C2_PLL_SEL_SHIFT = 7, + CLK_I2C2_DIV_CON_SHIFT = 0, + + /* CRU_CLK_SEL52_CON */ + CLK_PWM_PLL_SEL_GPLL = 0, + CLK_PWM_PLL_SEL_24M, + CLK_PWM_DIV_CON_MASK = 0x7f, + CLK_PWM_PLL_SEL_MASK = 1, + CLK_PWM1_PLL_SEL_SHIFT = 15, + CLK_PWM1_DIV_CON_SHIFT = 8, + CLK_PWM0_PLL_SEL_SHIFT = 7, + CLK_PWM0_DIV_CON_SHIFT = 0, + + /* CRU_CLK_SEL53_CON */ + CLK_SPI_PLL_SEL_GPLL = 0, + CLK_SPI_PLL_SEL_24M, + CLK_SPI_DIV_CON_MASK = 0x7f, + CLK_SPI_PLL_SEL_MASK = 1, + CLK_SPI1_PLL_SEL_SHIFT = 15, + CLK_SPI1_DIV_CON_SHIFT = 8, + CLK_SPI0_PLL_SEL_SHIFT = 7, + CLK_SPI0_DIV_CON_SHIFT = 0, + + /* CRU_CLK_SEL55_CON */ + CLK_SARADC_DIV_CON_SHIFT = 0, + CLK_SARADC_DIV_CON_MASK = 0x7ff, + + /* CRU_CLK_GATE10_CON */ + CLK_I2S1_OUT_MCLK_PAD_MASK = 0x1 << 9, + CLK_I2S1_OUT_MCLK_PAD_ENABLE = 0x1 << 9, + CLK_I2S1_OUT_MCLK_PAD_DISABLE = 0x0 << 9, + + /* CRU_PMU_MODE */ + GPLL_MODE_SHIFT = 0, + GPLL_MODE_MASK = 3 << GPLL_MODE_SHIFT, + + /* CRU_PMU_CLK_SEL0_CON */ + CLK_PMU_PCLK_DIV_SHIFT = 0, + CLK_PMU_PCLK_DIV_MASK = 0x1f << CLK_PMU_PCLK_DIV_SHIFT, +}; +#endif diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile index 41cfb7ad3f..f9134fd51f 100644 --- a/drivers/clk/rockchip/Makefile +++ b/drivers/clk/rockchip/Makefile @@ -3,6 +3,7 @@ # Copyright (c) 2017 Rockchip Electronics Co., Ltd # +obj-$(CONFIG_ROCKCHIP_PX30) += clk_px30.o obj-$(CONFIG_ROCKCHIP_RK3036) += clk_rk3036.o obj-$(CONFIG_ROCKCHIP_RK3128) += clk_rk3128.o obj-$(CONFIG_ROCKCHIP_RK3188) += clk_rk3188.o diff --git a/drivers/clk/rockchip/clk_px30.c b/drivers/clk/rockchip/clk_px30.c new file mode 100644 index 0000000000..36764c128b --- /dev/null +++ b/drivers/clk/rockchip/clk_px30.c @@ -0,0 +1,1630 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * (C) Copyright 2017 Rockchip Electronics Co., Ltd + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +enum { + VCO_MAX_HZ = 3200U * 1000000, + VCO_MIN_HZ = 800 * 1000000, + OUTPUT_MAX_HZ = 3200U * 1000000, + OUTPUT_MIN_HZ = 24 * 1000000, +}; + +#define PX30_VOP_PLL_LIMIT 600000000 + +#define PX30_PLL_RATE(_rate, _refdiv, _fbdiv, _postdiv1, \ + _postdiv2, _dsmpd, _frac) \ +{ \ + .rate = _rate##U, \ + .fbdiv = _fbdiv, \ + .postdiv1 = _postdiv1, \ + .refdiv = _refdiv, \ + .postdiv2 = _postdiv2, \ + .dsmpd = _dsmpd, \ + .frac = _frac, \ +} + +#define PX30_CPUCLK_RATE(_rate, _aclk_div, _pclk_div) \ +{ \ + .rate = _rate##U, \ + .aclk_div = _aclk_div, \ + .pclk_div = _pclk_div, \ +} + +#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) + +#define PX30_CLK_DUMP(_id, _name, _iscru) \ +{ \ + .id = _id, \ + .name = _name, \ + .is_cru = _iscru, \ +} + +static struct pll_rate_table px30_pll_rates[] = { + /* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */ + PX30_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0), + PX30_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0), + PX30_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0), + PX30_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0), + PX30_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0), + PX30_PLL_RATE(816000000, 1, 68, 2, 1, 1, 0), + PX30_PLL_RATE(600000000, 1, 75, 3, 1, 1, 0), +}; + +static struct cpu_rate_table px30_cpu_rates[] = { + PX30_CPUCLK_RATE(1200000000, 1, 5), + PX30_CPUCLK_RATE(1008000000, 1, 5), + PX30_CPUCLK_RATE(816000000, 1, 3), + PX30_CPUCLK_RATE(600000000, 1, 3), + PX30_CPUCLK_RATE(408000000, 1, 1), +}; + +static u8 pll_mode_shift[PLL_COUNT] = { + APLL_MODE_SHIFT, DPLL_MODE_SHIFT, CPLL_MODE_SHIFT, + NPLL_MODE_SHIFT, GPLL_MODE_SHIFT +}; + +static u32 pll_mode_mask[PLL_COUNT] = { + APLL_MODE_MASK, DPLL_MODE_MASK, CPLL_MODE_MASK, + NPLL_MODE_MASK, GPLL_MODE_MASK +}; + +static struct pll_rate_table auto_table; + +static ulong px30_clk_get_pll_rate(struct px30_clk_priv *priv, + enum px30_pll_id pll_id); + +static struct pll_rate_table *pll_clk_set_by_auto(u32 drate) +{ + struct pll_rate_table *rate = &auto_table; + u32 ref_khz = OSC_HZ / KHz, refdiv, fbdiv = 0; + u32 postdiv1, postdiv2 = 1; + u32 fref_khz; + u32 diff_khz, best_diff_khz; + const u32 max_refdiv = 63, max_fbdiv = 3200, min_fbdiv = 16; + const u32 max_postdiv1 = 7, max_postdiv2 = 7; + u32 vco_khz; + u32 rate_khz = drate / KHz; + + if (!drate) { + printf("%s: the frequency can't be 0 Hz\n", __func__); + return NULL; + } + + postdiv1 = DIV_ROUND_UP(VCO_MIN_HZ / 1000, rate_khz); + if (postdiv1 > max_postdiv1) { + postdiv2 = DIV_ROUND_UP(postdiv1, max_postdiv1); + postdiv1 = DIV_ROUND_UP(postdiv1, postdiv2); + } + + vco_khz = rate_khz * postdiv1 * postdiv2; + + if (vco_khz < (VCO_MIN_HZ / KHz) || vco_khz > (VCO_MAX_HZ / KHz) || + postdiv2 > max_postdiv2) { + printf("%s: Cannot find out a supported VCO for Freq (%uHz)\n", + __func__, rate_khz); + return NULL; + } + + rate->postdiv1 = postdiv1; + rate->postdiv2 = postdiv2; + + best_diff_khz = vco_khz; + for (refdiv = 1; refdiv < max_refdiv && best_diff_khz; refdiv++) { + fref_khz = ref_khz / refdiv; + + fbdiv = vco_khz / fref_khz; + if (fbdiv >= max_fbdiv || fbdiv <= min_fbdiv) + continue; + + diff_khz = vco_khz - fbdiv * fref_khz; + if (fbdiv + 1 < max_fbdiv && diff_khz > fref_khz / 2) { + fbdiv++; + diff_khz = fref_khz - diff_khz; + } + + if (diff_khz >= best_diff_khz) + continue; + + best_diff_khz = diff_khz; + rate->refdiv = refdiv; + rate->fbdiv = fbdiv; + } + + if (best_diff_khz > 4 * (MHz / KHz)) { + printf("%s: Failed to match output frequency %u bestis %u Hz\n", + __func__, rate_khz, + best_diff_khz * KHz); + return NULL; + } + + return rate; +} + +static const struct pll_rate_table *get_pll_settings(unsigned long rate) +{ + unsigned int rate_count = ARRAY_SIZE(px30_pll_rates); + int i; + + for (i = 0; i < rate_count; i++) { + if (rate == px30_pll_rates[i].rate) + return &px30_pll_rates[i]; + } + + return pll_clk_set_by_auto(rate); +} + +static const struct cpu_rate_table *get_cpu_settings(unsigned long rate) +{ + unsigned int rate_count = ARRAY_SIZE(px30_cpu_rates); + int i; + + for (i = 0; i < rate_count; i++) { + if (rate == px30_cpu_rates[i].rate) + return &px30_cpu_rates[i]; + } + + return NULL; +} + +/* + * How to calculate the PLL(from TRM V0.3 Part 1 Page 63): + * Formulas also embedded within the Fractional PLL Verilog model: + * If DSMPD = 1 (DSM is disabled, "integer mode") + * FOUTVCO = FREF / REFDIV * FBDIV + * FOUTPOSTDIV = FOUTVCO / POSTDIV1 / POSTDIV2 + * Where: + * FOUTVCO = Fractional PLL non-divided output frequency + * FOUTPOSTDIV = Fractional PLL divided output frequency + * (output of second post divider) + * FREF = Fractional PLL input reference frequency, (the OSC_HZ 24MHz input) + * REFDIV = Fractional PLL input reference clock divider + * FBDIV = Integer value programmed into feedback divide + * + */ +static int rkclk_set_pll(struct px30_pll *pll, unsigned int *mode, + enum px30_pll_id pll_id, + unsigned long drate) +{ + const struct pll_rate_table *rate; + uint vco_hz, output_hz; + + rate = get_pll_settings(drate); + if (!rate) { + printf("%s unsupport rate\n", __func__); + return -EINVAL; + } + + /* All PLLs have same VCO and output frequency range restrictions. */ + vco_hz = OSC_HZ / 1000 * rate->fbdiv / rate->refdiv * 1000; + output_hz = vco_hz / rate->postdiv1 / rate->postdiv2; + + debug("PLL at %p: fb=%d, ref=%d, pst1=%d, pst2=%d, vco=%u Hz, output=%u Hz\n", + pll, rate->fbdiv, rate->refdiv, rate->postdiv1, + rate->postdiv2, vco_hz, output_hz); + assert(vco_hz >= VCO_MIN_HZ && vco_hz <= VCO_MAX_HZ && + output_hz >= OUTPUT_MIN_HZ && output_hz <= OUTPUT_MAX_HZ); + + /* + * When power on or changing PLL setting, + * we must force PLL into slow mode to ensure output stable clock. + */ + rk_clrsetreg(mode, pll_mode_mask[pll_id], + PLLMUX_FROM_XIN24M << pll_mode_shift[pll_id]); + + /* use integer mode */ + rk_setreg(&pll->con1, 1 << PLL_DSMPD_SHIFT); + /* Power down */ + rk_setreg(&pll->con1, 1 << PLL_PD_SHIFT); + + rk_clrsetreg(&pll->con0, + PLL_POSTDIV1_MASK | PLL_FBDIV_MASK, + (rate->postdiv1 << PLL_POSTDIV1_SHIFT) | rate->fbdiv); + rk_clrsetreg(&pll->con1, PLL_POSTDIV2_MASK | PLL_REFDIV_MASK, + (rate->postdiv2 << PLL_POSTDIV2_SHIFT | + rate->refdiv << PLL_REFDIV_SHIFT)); + + /* Power Up */ + rk_clrreg(&pll->con1, 1 << PLL_PD_SHIFT); + + /* waiting for pll lock */ + while (!(readl(&pll->con1) & (1 << PLL_LOCK_STATUS_SHIFT))) + udelay(1); + + rk_clrsetreg(mode, pll_mode_mask[pll_id], + PLLMUX_FROM_PLL << pll_mode_shift[pll_id]); + + return 0; +} + +static uint32_t rkclk_pll_get_rate(struct px30_pll *pll, unsigned int *mode, + enum px30_pll_id pll_id) +{ + u32 refdiv, fbdiv, postdiv1, postdiv2; + u32 con, shift, mask; + + con = readl(mode); + shift = pll_mode_shift[pll_id]; + mask = pll_mode_mask[pll_id]; + + switch ((con & mask) >> shift) { + case PLLMUX_FROM_XIN24M: + return OSC_HZ; + case PLLMUX_FROM_PLL: + /* normal mode */ + con = readl(&pll->con0); + postdiv1 = (con & PLL_POSTDIV1_MASK) >> PLL_POSTDIV1_SHIFT; + fbdiv = (con & PLL_FBDIV_MASK) >> PLL_FBDIV_SHIFT; + con = readl(&pll->con1); + postdiv2 = (con & PLL_POSTDIV2_MASK) >> PLL_POSTDIV2_SHIFT; + refdiv = (con & PLL_REFDIV_MASK) >> PLL_REFDIV_SHIFT; + return (24 * fbdiv / (refdiv * postdiv1 * postdiv2)) * 1000000; + case PLLMUX_FROM_RTC32K: + default: + return 32768; + } +} + +static ulong px30_i2c_get_clk(struct px30_clk_priv *priv, ulong clk_id) +{ + struct px30_cru *cru = priv->cru; + u32 div, con; + + switch (clk_id) { + case SCLK_I2C0: + con = readl(&cru->clksel_con[49]); + div = con >> CLK_I2C0_DIV_CON_SHIFT & CLK_I2C_DIV_CON_MASK; + break; + case SCLK_I2C1: + con = readl(&cru->clksel_con[49]); + div = con >> CLK_I2C1_DIV_CON_SHIFT & CLK_I2C_DIV_CON_MASK; + break; + case SCLK_I2C2: + con = readl(&cru->clksel_con[50]); + div = con >> CLK_I2C2_DIV_CON_SHIFT & CLK_I2C_DIV_CON_MASK; + break; + case SCLK_I2C3: + con = readl(&cru->clksel_con[50]); + div = con >> CLK_I2C3_DIV_CON_SHIFT & CLK_I2C_DIV_CON_MASK; + break; + default: + printf("do not support this i2c bus\n"); + return -EINVAL; + } + + return DIV_TO_RATE(priv->gpll_hz, div); +} + +static ulong px30_i2c_set_clk(struct px30_clk_priv *priv, ulong clk_id, uint hz) +{ + struct px30_cru *cru = priv->cru; + int src_clk_div; + + src_clk_div = DIV_ROUND_UP(priv->gpll_hz, hz); + assert(src_clk_div - 1 <= 127); + + switch (clk_id) { + case SCLK_I2C0: + rk_clrsetreg(&cru->clksel_con[49], + CLK_I2C_DIV_CON_MASK << CLK_I2C0_DIV_CON_SHIFT | + CLK_I2C_PLL_SEL_MASK << CLK_I2C0_PLL_SEL_SHIFT, + (src_clk_div - 1) << CLK_I2C0_DIV_CON_SHIFT | + CLK_I2C_PLL_SEL_GPLL << CLK_I2C0_PLL_SEL_SHIFT); + break; + case SCLK_I2C1: + rk_clrsetreg(&cru->clksel_con[49], + CLK_I2C_DIV_CON_MASK << CLK_I2C1_DIV_CON_SHIFT | + CLK_I2C_PLL_SEL_MASK << CLK_I2C1_PLL_SEL_SHIFT, + (src_clk_div - 1) << CLK_I2C1_DIV_CON_SHIFT | + CLK_I2C_PLL_SEL_GPLL << CLK_I2C1_PLL_SEL_SHIFT); + break; + case SCLK_I2C2: + rk_clrsetreg(&cru->clksel_con[50], + CLK_I2C_DIV_CON_MASK << CLK_I2C2_DIV_CON_SHIFT | + CLK_I2C_PLL_SEL_MASK << CLK_I2C2_PLL_SEL_SHIFT, + (src_clk_div - 1) << CLK_I2C2_DIV_CON_SHIFT | + CLK_I2C_PLL_SEL_GPLL << CLK_I2C2_PLL_SEL_SHIFT); + break; + case SCLK_I2C3: + rk_clrsetreg(&cru->clksel_con[50], + CLK_I2C_DIV_CON_MASK << CLK_I2C3_DIV_CON_SHIFT | + CLK_I2C_PLL_SEL_MASK << CLK_I2C3_PLL_SEL_SHIFT, + (src_clk_div - 1) << CLK_I2C3_DIV_CON_SHIFT | + CLK_I2C_PLL_SEL_GPLL << CLK_I2C3_PLL_SEL_SHIFT); + break; + default: + printf("do not support this i2c bus\n"); + return -EINVAL; + } + + return px30_i2c_get_clk(priv, clk_id); +} + +/* + * calculate best rational approximation for a given fraction + * taking into account restricted register size, e.g. to find + * appropriate values for a pll with 5 bit denominator and + * 8 bit numerator register fields, trying to set up with a + * frequency ratio of 3.1415, one would say: + * + * rational_best_approximation(31415, 10000, + * (1 << 8) - 1, (1 << 5) - 1, &n, &d); + * + * you may look at given_numerator as a fixed point number, + * with the fractional part size described in given_denominator. + * + * for theoretical background, see: + * http://en.wikipedia.org/wiki/Continued_fraction + */ +static void rational_best_approximation(unsigned long given_numerator, + unsigned long given_denominator, + unsigned long max_numerator, + unsigned long max_denominator, + unsigned long *best_numerator, + unsigned long *best_denominator) +{ + unsigned long n, d, n0, d0, n1, d1; + + n = given_numerator; + d = given_denominator; + n0 = 0; + d1 = 0; + n1 = 1; + d0 = 1; + for (;;) { + unsigned long t, a; + + if (n1 > max_numerator || d1 > max_denominator) { + n1 = n0; + d1 = d0; + break; + } + if (d == 0) + break; + t = d; + a = n / d; + d = n % d; + n = t; + t = n0 + a * n1; + n0 = n1; + n1 = t; + t = d0 + a * d1; + d0 = d1; + d1 = t; + } + *best_numerator = n1; + *best_denominator = d1; +} + +static ulong px30_i2s_get_clk(struct px30_clk_priv *priv, ulong clk_id) +{ + u32 con, fracdiv, gate; + u32 clk_src = priv->gpll_hz / 2; + unsigned long m, n; + struct px30_cru *cru = priv->cru; + + switch (clk_id) { + case SCLK_I2S1: + con = readl(&cru->clksel_con[30]); + fracdiv = readl(&cru->clksel_con[31]); + gate = readl(&cru->clkgate_con[10]); + m = fracdiv & CLK_I2S1_FRAC_NUMERATOR_MASK; + m >>= CLK_I2S1_FRAC_NUMERATOR_SHIFT; + n = fracdiv & CLK_I2S1_FRAC_DENOMINATOR_MASK; + n >>= CLK_I2S1_FRAC_DENOMINATOR_SHIFT; + debug("con30: 0x%x, gate: 0x%x, frac: 0x%x\n", + con, gate, fracdiv); + break; + default: + printf("do not support this i2s bus\n"); + return -EINVAL; + } + + return clk_src * n / m; +} + +static ulong px30_i2s_set_clk(struct px30_clk_priv *priv, ulong clk_id, uint hz) +{ + u32 clk_src; + unsigned long m, n, val; + struct px30_cru *cru = priv->cru; + + clk_src = priv->gpll_hz / 2; + rational_best_approximation(hz, clk_src, + GENMASK(16 - 1, 0), + GENMASK(16 - 1, 0), + &m, &n); + switch (clk_id) { + case SCLK_I2S1: + rk_clrsetreg(&cru->clksel_con[30], + CLK_I2S1_PLL_SEL_MASK, CLK_I2S1_PLL_SEL_GPLL); + rk_clrsetreg(&cru->clksel_con[30], + CLK_I2S1_DIV_CON_MASK, 0x1); + rk_clrsetreg(&cru->clksel_con[30], + CLK_I2S1_SEL_MASK, CLK_I2S1_SEL_FRAC); + val = m << CLK_I2S1_FRAC_NUMERATOR_SHIFT | n; + writel(val, &cru->clksel_con[31]); + rk_clrsetreg(&cru->clkgate_con[10], + CLK_I2S1_OUT_MCLK_PAD_MASK, + CLK_I2S1_OUT_MCLK_PAD_ENABLE); + break; + default: + printf("do not support this i2s bus\n"); + return -EINVAL; + } + + return px30_i2s_get_clk(priv, clk_id); +} + +static ulong px30_nandc_get_clk(struct px30_clk_priv *priv) +{ + struct px30_cru *cru = priv->cru; + u32 div, con; + + con = readl(&cru->clksel_con[15]); + div = (con & NANDC_DIV_MASK) >> NANDC_DIV_SHIFT; + + return DIV_TO_RATE(priv->gpll_hz, div); +} + +static ulong px30_nandc_set_clk(struct px30_clk_priv *priv, + ulong set_rate) +{ + struct px30_cru *cru = priv->cru; + int src_clk_div; + + /* Select nandc source from GPLL by default */ + /* nandc clock defaulg div 2 internal, need provide double in cru */ + src_clk_div = DIV_ROUND_UP(priv->gpll_hz, set_rate); + assert(src_clk_div - 1 <= 31); + + rk_clrsetreg(&cru->clksel_con[15], + NANDC_CLK_SEL_MASK | NANDC_PLL_MASK | + NANDC_DIV_MASK, + NANDC_CLK_SEL_NANDC << NANDC_CLK_SEL_SHIFT | + NANDC_SEL_GPLL << NANDC_PLL_SHIFT | + (src_clk_div - 1) << NANDC_DIV_SHIFT); + + return px30_nandc_get_clk(priv); +} + +static ulong px30_mmc_get_clk(struct px30_clk_priv *priv, uint clk_id) +{ + struct px30_cru *cru = priv->cru; + u32 div, con, con_id; + + switch (clk_id) { + case HCLK_SDMMC: + case SCLK_SDMMC: + con_id = 16; + break; + case HCLK_EMMC: + case SCLK_EMMC: + case SCLK_EMMC_SAMPLE: + con_id = 20; + break; + default: + return -EINVAL; + } + + con = readl(&cru->clksel_con[con_id]); + div = (con & EMMC_DIV_MASK) >> EMMC_DIV_SHIFT; + + if ((con & EMMC_PLL_MASK) >> EMMC_PLL_SHIFT + == EMMC_SEL_24M) + return DIV_TO_RATE(OSC_HZ, div) / 2; + else + return DIV_TO_RATE(priv->gpll_hz, div) / 2; +} + +static ulong px30_mmc_set_clk(struct px30_clk_priv *priv, + ulong clk_id, ulong set_rate) +{ + struct px30_cru *cru = priv->cru; + int src_clk_div; + u32 con_id; + + switch (clk_id) { + case HCLK_SDMMC: + case SCLK_SDMMC: + con_id = 16; + break; + case HCLK_EMMC: + case SCLK_EMMC: + con_id = 20; + break; + default: + return -EINVAL; + } + + /* Select clk_sdmmc/emmc source from GPLL by default */ + /* mmc clock defaulg div 2 internal, need provide double in cru */ + src_clk_div = DIV_ROUND_UP(priv->gpll_hz / 2, set_rate); + + if (src_clk_div > 127) { + /* use 24MHz source for 400KHz clock */ + src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, set_rate); + rk_clrsetreg(&cru->clksel_con[con_id], + EMMC_PLL_MASK | EMMC_DIV_MASK, + EMMC_SEL_24M << EMMC_PLL_SHIFT | + (src_clk_div - 1) << EMMC_DIV_SHIFT); + } else { + rk_clrsetreg(&cru->clksel_con[con_id], + EMMC_PLL_MASK | EMMC_DIV_MASK, + EMMC_SEL_GPLL << EMMC_PLL_SHIFT | + (src_clk_div - 1) << EMMC_DIV_SHIFT); + } + rk_clrsetreg(&cru->clksel_con[con_id + 1], EMMC_CLK_SEL_MASK, + EMMC_CLK_SEL_EMMC); + + return px30_mmc_get_clk(priv, clk_id); +} + +static ulong px30_pwm_get_clk(struct px30_clk_priv *priv, ulong clk_id) +{ + struct px30_cru *cru = priv->cru; + u32 div, con; + + switch (clk_id) { + case SCLK_PWM0: + con = readl(&cru->clksel_con[52]); + div = con >> CLK_PWM0_DIV_CON_SHIFT & CLK_PWM_DIV_CON_MASK; + break; + case SCLK_PWM1: + con = readl(&cru->clksel_con[52]); + div = con >> CLK_PWM1_DIV_CON_SHIFT & CLK_PWM_DIV_CON_MASK; + break; + default: + printf("do not support this pwm bus\n"); + return -EINVAL; + } + + return DIV_TO_RATE(priv->gpll_hz, div); +} + +static ulong px30_pwm_set_clk(struct px30_clk_priv *priv, ulong clk_id, uint hz) +{ + struct px30_cru *cru = priv->cru; + int src_clk_div; + + src_clk_div = DIV_ROUND_UP(priv->gpll_hz, hz); + assert(src_clk_div - 1 <= 127); + + switch (clk_id) { + case SCLK_PWM0: + rk_clrsetreg(&cru->clksel_con[52], + CLK_PWM_DIV_CON_MASK << CLK_PWM0_DIV_CON_SHIFT | + CLK_PWM_PLL_SEL_MASK << CLK_PWM0_PLL_SEL_SHIFT, + (src_clk_div - 1) << CLK_PWM0_DIV_CON_SHIFT | + CLK_PWM_PLL_SEL_GPLL << CLK_PWM0_PLL_SEL_SHIFT); + break; + case SCLK_PWM1: + rk_clrsetreg(&cru->clksel_con[52], + CLK_PWM_DIV_CON_MASK << CLK_PWM1_DIV_CON_SHIFT | + CLK_PWM_PLL_SEL_MASK << CLK_PWM1_PLL_SEL_SHIFT, + (src_clk_div - 1) << CLK_PWM1_DIV_CON_SHIFT | + CLK_PWM_PLL_SEL_GPLL << CLK_PWM1_PLL_SEL_SHIFT); + break; + default: + printf("do not support this pwm bus\n"); + return -EINVAL; + } + + return px30_pwm_get_clk(priv, clk_id); +} + +static ulong px30_saradc_get_clk(struct px30_clk_priv *priv) +{ + struct px30_cru *cru = priv->cru; + u32 div, con; + + con = readl(&cru->clksel_con[55]); + div = con >> CLK_SARADC_DIV_CON_SHIFT & CLK_SARADC_DIV_CON_MASK; + + return DIV_TO_RATE(OSC_HZ, div); +} + +static ulong px30_saradc_set_clk(struct px30_clk_priv *priv, uint hz) +{ + struct px30_cru *cru = priv->cru; + int src_clk_div; + + src_clk_div = DIV_ROUND_UP(OSC_HZ, hz); + assert(src_clk_div - 1 <= 2047); + + rk_clrsetreg(&cru->clksel_con[55], + CLK_SARADC_DIV_CON_MASK, + (src_clk_div - 1) << CLK_SARADC_DIV_CON_SHIFT); + + return px30_saradc_get_clk(priv); +} + +static ulong px30_tsadc_get_clk(struct px30_clk_priv *priv) +{ + struct px30_cru *cru = priv->cru; + u32 div, con; + + con = readl(&cru->clksel_con[54]); + div = con >> CLK_SARADC_DIV_CON_SHIFT & CLK_SARADC_DIV_CON_MASK; + + return DIV_TO_RATE(OSC_HZ, div); +} + +static ulong px30_tsadc_set_clk(struct px30_clk_priv *priv, uint hz) +{ + struct px30_cru *cru = priv->cru; + int src_clk_div; + + src_clk_div = DIV_ROUND_UP(OSC_HZ, hz); + assert(src_clk_div - 1 <= 2047); + + rk_clrsetreg(&cru->clksel_con[54], + CLK_SARADC_DIV_CON_MASK, + (src_clk_div - 1) << CLK_SARADC_DIV_CON_SHIFT); + + return px30_tsadc_get_clk(priv); +} + +static ulong px30_spi_get_clk(struct px30_clk_priv *priv, ulong clk_id) +{ + struct px30_cru *cru = priv->cru; + u32 div, con; + + switch (clk_id) { + case SCLK_SPI0: + con = readl(&cru->clksel_con[53]); + div = con >> CLK_SPI0_DIV_CON_SHIFT & CLK_SPI_DIV_CON_MASK; + break; + case SCLK_SPI1: + con = readl(&cru->clksel_con[53]); + div = con >> CLK_SPI1_DIV_CON_SHIFT & CLK_SPI_DIV_CON_MASK; + break; + default: + printf("do not support this pwm bus\n"); + return -EINVAL; + } + + return DIV_TO_RATE(priv->gpll_hz, div); +} + +static ulong px30_spi_set_clk(struct px30_clk_priv *priv, ulong clk_id, uint hz) +{ + struct px30_cru *cru = priv->cru; + int src_clk_div; + + src_clk_div = DIV_ROUND_UP(priv->gpll_hz, hz); + assert(src_clk_div - 1 <= 127); + + switch (clk_id) { + case SCLK_SPI0: + rk_clrsetreg(&cru->clksel_con[53], + CLK_SPI_DIV_CON_MASK << CLK_SPI0_DIV_CON_SHIFT | + CLK_SPI_PLL_SEL_MASK << CLK_SPI0_PLL_SEL_SHIFT, + (src_clk_div - 1) << CLK_SPI0_DIV_CON_SHIFT | + CLK_SPI_PLL_SEL_GPLL << CLK_SPI0_PLL_SEL_SHIFT); + break; + case SCLK_SPI1: + rk_clrsetreg(&cru->clksel_con[53], + CLK_SPI_DIV_CON_MASK << CLK_SPI1_DIV_CON_SHIFT | + CLK_SPI_PLL_SEL_MASK << CLK_SPI1_PLL_SEL_SHIFT, + (src_clk_div - 1) << CLK_SPI1_DIV_CON_SHIFT | + CLK_SPI_PLL_SEL_GPLL << CLK_SPI1_PLL_SEL_SHIFT); + break; + default: + printf("do not support this pwm bus\n"); + return -EINVAL; + } + + return px30_spi_get_clk(priv, clk_id); +} + +static ulong px30_vop_get_clk(struct px30_clk_priv *priv, ulong clk_id) +{ + struct px30_cru *cru = priv->cru; + u32 div, con, parent; + + switch (clk_id) { + case ACLK_VOPB: + case ACLK_VOPL: + con = readl(&cru->clksel_con[3]); + div = con & ACLK_VO_DIV_MASK; + parent = priv->gpll_hz; + break; + case DCLK_VOPB: + con = readl(&cru->clksel_con[5]); + div = con & DCLK_VOPB_DIV_MASK; + parent = rkclk_pll_get_rate(&cru->pll[CPLL], &cru->mode, CPLL); + break; + case DCLK_VOPL: + con = readl(&cru->clksel_con[8]); + div = con & DCLK_VOPL_DIV_MASK; + parent = rkclk_pll_get_rate(&cru->pll[NPLL], &cru->mode, NPLL); + break; + default: + return -ENOENT; + } + + return DIV_TO_RATE(parent, div); +} + +static ulong px30_vop_set_clk(struct px30_clk_priv *priv, ulong clk_id, uint hz) +{ + struct px30_cru *cru = priv->cru; + ulong npll_hz; + int src_clk_div; + + switch (clk_id) { + case ACLK_VOPB: + case ACLK_VOPL: + src_clk_div = DIV_ROUND_UP(priv->gpll_hz, hz); + assert(src_clk_div - 1 <= 31); + rk_clrsetreg(&cru->clksel_con[3], + ACLK_VO_PLL_MASK | ACLK_VO_DIV_MASK, + ACLK_VO_SEL_GPLL << ACLK_VO_PLL_SHIFT | + (src_clk_div - 1) << ACLK_VO_DIV_SHIFT); + break; + case DCLK_VOPB: + if (hz < PX30_VOP_PLL_LIMIT) { + src_clk_div = DIV_ROUND_UP(PX30_VOP_PLL_LIMIT, hz); + if (src_clk_div % 2) + src_clk_div = src_clk_div - 1; + } else { + src_clk_div = 1; + } + assert(src_clk_div - 1 <= 255); + rkclk_set_pll(&cru->pll[CPLL], &cru->mode, + CPLL, hz * src_clk_div); + rk_clrsetreg(&cru->clksel_con[5], + DCLK_VOPB_SEL_MASK | DCLK_VOPB_PLL_SEL_MASK | + DCLK_VOPB_DIV_MASK, + DCLK_VOPB_SEL_DIVOUT << DCLK_VOPB_SEL_SHIFT | + DCLK_VOPB_PLL_SEL_CPLL << DCLK_VOPB_PLL_SEL_SHIFT | + (src_clk_div - 1) << DCLK_VOPB_DIV_SHIFT); + break; + case DCLK_VOPL: + npll_hz = px30_clk_get_pll_rate(priv, NPLL); + if (npll_hz >= PX30_VOP_PLL_LIMIT && npll_hz >= hz && + npll_hz % hz == 0) { + src_clk_div = npll_hz / hz; + assert(src_clk_div - 1 <= 255); + } else { + if (hz < PX30_VOP_PLL_LIMIT) { + src_clk_div = DIV_ROUND_UP(PX30_VOP_PLL_LIMIT, + hz); + if (src_clk_div % 2) + src_clk_div = src_clk_div - 1; + } else { + src_clk_div = 1; + } + assert(src_clk_div - 1 <= 255); + rkclk_set_pll(&cru->pll[NPLL], &cru->mode, NPLL, + hz * src_clk_div); + } + rk_clrsetreg(&cru->clksel_con[8], + DCLK_VOPL_SEL_MASK | DCLK_VOPL_PLL_SEL_MASK | + DCLK_VOPL_DIV_MASK, + DCLK_VOPL_SEL_DIVOUT << DCLK_VOPL_SEL_SHIFT | + DCLK_VOPL_PLL_SEL_NPLL << DCLK_VOPL_PLL_SEL_SHIFT | + (src_clk_div - 1) << DCLK_VOPL_DIV_SHIFT); + break; + default: + printf("do not support this vop freq\n"); + return -EINVAL; + } + + return px30_vop_get_clk(priv, clk_id); +} + +static ulong px30_bus_get_clk(struct px30_clk_priv *priv, ulong clk_id) +{ + struct px30_cru *cru = priv->cru; + u32 div, con, parent; + + switch (clk_id) { + case ACLK_BUS_PRE: + con = readl(&cru->clksel_con[23]); + div = (con & BUS_ACLK_DIV_MASK) >> BUS_ACLK_DIV_SHIFT; + parent = priv->gpll_hz; + break; + case HCLK_BUS_PRE: + con = readl(&cru->clksel_con[24]); + div = (con & BUS_HCLK_DIV_MASK) >> BUS_HCLK_DIV_SHIFT; + parent = priv->gpll_hz; + break; + case PCLK_BUS_PRE: + case PCLK_WDT_NS: + parent = px30_bus_get_clk(priv, ACLK_BUS_PRE); + con = readl(&cru->clksel_con[24]); + div = (con & BUS_PCLK_DIV_MASK) >> BUS_PCLK_DIV_SHIFT; + break; + default: + return -ENOENT; + } + + return DIV_TO_RATE(parent, div); +} + +static ulong px30_bus_set_clk(struct px30_clk_priv *priv, ulong clk_id, + ulong hz) +{ + struct px30_cru *cru = priv->cru; + int src_clk_div; + + /* + * select gpll as pd_bus bus clock source and + * set up dependent divisors for PCLK/HCLK and ACLK clocks. + */ + switch (clk_id) { + case ACLK_BUS_PRE: + src_clk_div = DIV_ROUND_UP(priv->gpll_hz, hz); + assert(src_clk_div - 1 <= 31); + rk_clrsetreg(&cru->clksel_con[23], + BUS_PLL_SEL_MASK | BUS_ACLK_DIV_MASK, + BUS_PLL_SEL_GPLL << BUS_PLL_SEL_SHIFT | + (src_clk_div - 1) << BUS_ACLK_DIV_SHIFT); + break; + case HCLK_BUS_PRE: + src_clk_div = DIV_ROUND_UP(priv->gpll_hz, hz); + assert(src_clk_div - 1 <= 31); + rk_clrsetreg(&cru->clksel_con[24], + BUS_PLL_SEL_MASK | BUS_HCLK_DIV_MASK, + BUS_PLL_SEL_GPLL << BUS_PLL_SEL_SHIFT | + (src_clk_div - 1) << BUS_HCLK_DIV_SHIFT); + break; + case PCLK_BUS_PRE: + src_clk_div = + DIV_ROUND_UP(px30_bus_get_clk(priv, ACLK_BUS_PRE), hz); + assert(src_clk_div - 1 <= 3); + rk_clrsetreg(&cru->clksel_con[24], + BUS_PCLK_DIV_MASK, + (src_clk_div - 1) << BUS_PCLK_DIV_SHIFT); + break; + default: + printf("do not support this bus freq\n"); + return -EINVAL; + } + + return px30_bus_get_clk(priv, clk_id); +} + +static ulong px30_peri_get_clk(struct px30_clk_priv *priv, ulong clk_id) +{ + struct px30_cru *cru = priv->cru; + u32 div, con, parent; + + switch (clk_id) { + case ACLK_PERI_PRE: + con = readl(&cru->clksel_con[14]); + div = (con & PERI_ACLK_DIV_MASK) >> PERI_ACLK_DIV_SHIFT; + parent = priv->gpll_hz; + break; + case HCLK_PERI_PRE: + con = readl(&cru->clksel_con[14]); + div = (con & PERI_HCLK_DIV_MASK) >> PERI_HCLK_DIV_SHIFT; + parent = priv->gpll_hz; + break; + default: + return -ENOENT; + } + + return DIV_TO_RATE(parent, div); +} + +static ulong px30_peri_set_clk(struct px30_clk_priv *priv, ulong clk_id, + ulong hz) +{ + struct px30_cru *cru = priv->cru; + int src_clk_div; + + src_clk_div = DIV_ROUND_UP(priv->gpll_hz, hz); + assert(src_clk_div - 1 <= 31); + + /* + * select gpll as pd_peri bus clock source and + * set up dependent divisors for HCLK and ACLK clocks. + */ + switch (clk_id) { + case ACLK_PERI_PRE: + rk_clrsetreg(&cru->clksel_con[14], + PERI_PLL_SEL_MASK | PERI_ACLK_DIV_MASK, + PERI_PLL_GPLL << PERI_PLL_SEL_SHIFT | + (src_clk_div - 1) << PERI_ACLK_DIV_SHIFT); + break; + case HCLK_PERI_PRE: + rk_clrsetreg(&cru->clksel_con[14], + PERI_PLL_SEL_MASK | PERI_HCLK_DIV_MASK, + PERI_PLL_GPLL << PERI_PLL_SEL_SHIFT | + (src_clk_div - 1) << PERI_HCLK_DIV_SHIFT); + break; + default: + printf("do not support this peri freq\n"); + return -EINVAL; + } + + return px30_peri_get_clk(priv, clk_id); +} + +#ifndef CONFIG_SPL_BUILD +static ulong px30_crypto_get_clk(struct px30_clk_priv *priv, ulong clk_id) +{ + struct px30_cru *cru = priv->cru; + u32 div, con, parent; + + switch (clk_id) { + case SCLK_CRYPTO: + con = readl(&cru->clksel_con[25]); + div = (con & CRYPTO_DIV_MASK) >> CRYPTO_DIV_SHIFT; + parent = priv->gpll_hz; + break; + case SCLK_CRYPTO_APK: + con = readl(&cru->clksel_con[25]); + div = (con & CRYPTO_APK_DIV_MASK) >> CRYPTO_APK_DIV_SHIFT; + parent = priv->gpll_hz; + break; + default: + return -ENOENT; + } + + return DIV_TO_RATE(parent, div); +} + +static ulong px30_crypto_set_clk(struct px30_clk_priv *priv, ulong clk_id, + ulong hz) +{ + struct px30_cru *cru = priv->cru; + int src_clk_div; + + src_clk_div = DIV_ROUND_UP(priv->gpll_hz, hz); + assert(src_clk_div - 1 <= 31); + + /* + * select gpll as crypto clock source and + * set up dependent divisors for crypto clocks. + */ + switch (clk_id) { + case SCLK_CRYPTO: + rk_clrsetreg(&cru->clksel_con[25], + CRYPTO_PLL_SEL_MASK | CRYPTO_DIV_MASK, + CRYPTO_PLL_SEL_GPLL << CRYPTO_PLL_SEL_SHIFT | + (src_clk_div - 1) << CRYPTO_DIV_SHIFT); + break; + case SCLK_CRYPTO_APK: + rk_clrsetreg(&cru->clksel_con[25], + CRYPTO_APK_PLL_SEL_MASK | CRYPTO_APK_DIV_MASK, + CRYPTO_PLL_SEL_GPLL << CRYPTO_APK_SEL_SHIFT | + (src_clk_div - 1) << CRYPTO_APK_DIV_SHIFT); + break; + default: + printf("do not support this peri freq\n"); + return -EINVAL; + } + + return px30_crypto_get_clk(priv, clk_id); +} + +static ulong px30_i2s1_mclk_get_clk(struct px30_clk_priv *priv, ulong clk_id) +{ + struct px30_cru *cru = priv->cru; + u32 con; + + con = readl(&cru->clksel_con[30]); + + if (!(con & CLK_I2S1_OUT_SEL_MASK)) + return -ENOENT; + + return 12000000; +} + +static ulong px30_i2s1_mclk_set_clk(struct px30_clk_priv *priv, ulong clk_id, + ulong hz) +{ + struct px30_cru *cru = priv->cru; + + if (hz != 12000000) { + printf("do not support this i2s1_mclk freq\n"); + return -EINVAL; + } + + rk_clrsetreg(&cru->clksel_con[30], CLK_I2S1_OUT_SEL_MASK, + CLK_I2S1_OUT_SEL_OSC); + rk_clrsetreg(&cru->clkgate_con[10], CLK_I2S1_OUT_MCLK_PAD_MASK, + CLK_I2S1_OUT_MCLK_PAD_ENABLE); + + return px30_i2s1_mclk_get_clk(priv, clk_id); +} + +static ulong px30_mac_set_clk(struct px30_clk_priv *priv, uint hz) +{ + struct px30_cru *cru = priv->cru; + u32 con = readl(&cru->clksel_con[22]); + ulong pll_rate; + u8 div; + + if ((con >> GMAC_PLL_SEL_SHIFT) & GMAC_PLL_SEL_CPLL) + pll_rate = px30_clk_get_pll_rate(priv, CPLL); + else if ((con >> GMAC_PLL_SEL_SHIFT) & GMAC_PLL_SEL_NPLL) + pll_rate = px30_clk_get_pll_rate(priv, NPLL); + else + pll_rate = priv->gpll_hz; + + /*default set 50MHZ for gmac*/ + if (!hz) + hz = 50000000; + + div = DIV_ROUND_UP(pll_rate, hz) - 1; + assert(div < 32); + rk_clrsetreg(&cru->clksel_con[22], CLK_GMAC_DIV_MASK, + div << CLK_GMAC_DIV_SHIFT); + + return DIV_TO_RATE(pll_rate, div); +} + +static int px30_mac_set_speed_clk(struct px30_clk_priv *priv, uint hz) +{ + struct px30_cru *cru = priv->cru; + + if (hz != 2500000 && hz != 25000000) { + debug("Unsupported mac speed:%d\n", hz); + return -EINVAL; + } + + rk_clrsetreg(&cru->clksel_con[23], RMII_CLK_SEL_MASK, + ((hz == 2500000) ? 0 : 1) << RMII_CLK_SEL_SHIFT); + + return 0; +} + +#endif + +static ulong px30_clk_get_pll_rate(struct px30_clk_priv *priv, + enum px30_pll_id pll_id) +{ + struct px30_cru *cru = priv->cru; + + return rkclk_pll_get_rate(&cru->pll[pll_id], &cru->mode, pll_id); +} + +static ulong px30_clk_set_pll_rate(struct px30_clk_priv *priv, + enum px30_pll_id pll_id, ulong hz) +{ + struct px30_cru *cru = priv->cru; + + if (rkclk_set_pll(&cru->pll[pll_id], &cru->mode, pll_id, hz)) + return -EINVAL; + return rkclk_pll_get_rate(&cru->pll[pll_id], &cru->mode, pll_id); +} + +static ulong px30_armclk_set_clk(struct px30_clk_priv *priv, ulong hz) +{ + struct px30_cru *cru = priv->cru; + const struct cpu_rate_table *rate; + ulong old_rate; + + rate = get_cpu_settings(hz); + if (!rate) { + printf("%s unsupport rate\n", __func__); + return -EINVAL; + } + + /* + * select apll as cpu/core clock pll source and + * set up dependent divisors for PERI and ACLK clocks. + * core hz : apll = 1:1 + */ + old_rate = px30_clk_get_pll_rate(priv, APLL); + if (old_rate > hz) { + if (rkclk_set_pll(&cru->pll[APLL], &cru->mode, APLL, hz)) + return -EINVAL; + rk_clrsetreg(&cru->clksel_con[0], + CORE_CLK_PLL_SEL_MASK | CORE_DIV_CON_MASK | + CORE_ACLK_DIV_MASK | CORE_DBG_DIV_MASK, + rate->aclk_div << CORE_ACLK_DIV_SHIFT | + rate->pclk_div << CORE_DBG_DIV_SHIFT | + CORE_CLK_PLL_SEL_APLL << CORE_CLK_PLL_SEL_SHIFT | + 0 << CORE_DIV_CON_SHIFT); + } else if (old_rate < hz) { + rk_clrsetreg(&cru->clksel_con[0], + CORE_CLK_PLL_SEL_MASK | CORE_DIV_CON_MASK | + CORE_ACLK_DIV_MASK | CORE_DBG_DIV_MASK, + rate->aclk_div << CORE_ACLK_DIV_SHIFT | + rate->pclk_div << CORE_DBG_DIV_SHIFT | + CORE_CLK_PLL_SEL_APLL << CORE_CLK_PLL_SEL_SHIFT | + 0 << CORE_DIV_CON_SHIFT); + if (rkclk_set_pll(&cru->pll[APLL], &cru->mode, APLL, hz)) + return -EINVAL; + } + + return px30_clk_get_pll_rate(priv, APLL); +} + +static ulong px30_clk_get_rate(struct clk *clk) +{ + struct px30_clk_priv *priv = dev_get_priv(clk->dev); + ulong rate = 0; + + if (!priv->gpll_hz && clk->id > ARMCLK) { + printf("%s gpll=%lu\n", __func__, priv->gpll_hz); + return -ENOENT; + } + + debug("%s %ld\n", __func__, clk->id); + switch (clk->id) { + case PLL_APLL: + rate = px30_clk_get_pll_rate(priv, APLL); + break; + case PLL_DPLL: + rate = px30_clk_get_pll_rate(priv, DPLL); + break; + case PLL_CPLL: + rate = px30_clk_get_pll_rate(priv, CPLL); + break; + case PLL_NPLL: + rate = px30_clk_get_pll_rate(priv, NPLL); + break; + case ARMCLK: + rate = px30_clk_get_pll_rate(priv, APLL); + break; + case HCLK_SDMMC: + case HCLK_EMMC: + case SCLK_SDMMC: + case SCLK_EMMC: + case SCLK_EMMC_SAMPLE: + rate = px30_mmc_get_clk(priv, clk->id); + break; + case SCLK_I2C0: + case SCLK_I2C1: + case SCLK_I2C2: + case SCLK_I2C3: + rate = px30_i2c_get_clk(priv, clk->id); + break; + case SCLK_I2S1: + rate = px30_i2s_get_clk(priv, clk->id); + break; + case SCLK_NANDC: + rate = px30_nandc_get_clk(priv); + break; + case SCLK_PWM0: + case SCLK_PWM1: + rate = px30_pwm_get_clk(priv, clk->id); + break; + case SCLK_SARADC: + rate = px30_saradc_get_clk(priv); + break; + case SCLK_TSADC: + rate = px30_tsadc_get_clk(priv); + break; + case SCLK_SPI0: + case SCLK_SPI1: + rate = px30_spi_get_clk(priv, clk->id); + break; + case ACLK_VOPB: + case ACLK_VOPL: + case DCLK_VOPB: + case DCLK_VOPL: + rate = px30_vop_get_clk(priv, clk->id); + break; + case ACLK_BUS_PRE: + case HCLK_BUS_PRE: + case PCLK_BUS_PRE: + case PCLK_WDT_NS: + rate = px30_bus_get_clk(priv, clk->id); + break; + case ACLK_PERI_PRE: + case HCLK_PERI_PRE: + rate = px30_peri_get_clk(priv, clk->id); + break; +#ifndef CONFIG_SPL_BUILD + case SCLK_CRYPTO: + case SCLK_CRYPTO_APK: + rate = px30_crypto_get_clk(priv, clk->id); + break; +#endif + default: + return -ENOENT; + } + + return rate; +} + +static ulong px30_clk_set_rate(struct clk *clk, ulong rate) +{ + struct px30_clk_priv *priv = dev_get_priv(clk->dev); + ulong ret = 0; + + if (!priv->gpll_hz && clk->id > ARMCLK) { + printf("%s gpll=%lu\n", __func__, priv->gpll_hz); + return -ENOENT; + } + + debug("%s %ld %ld\n", __func__, clk->id, rate); + switch (clk->id) { + case PLL_NPLL: + ret = px30_clk_set_pll_rate(priv, NPLL, rate); + break; + case ARMCLK: + ret = px30_armclk_set_clk(priv, rate); + break; + case HCLK_SDMMC: + case HCLK_EMMC: + case SCLK_SDMMC: + case SCLK_EMMC: + ret = px30_mmc_set_clk(priv, clk->id, rate); + break; + case SCLK_I2C0: + case SCLK_I2C1: + case SCLK_I2C2: + case SCLK_I2C3: + ret = px30_i2c_set_clk(priv, clk->id, rate); + break; + case SCLK_I2S1: + ret = px30_i2s_set_clk(priv, clk->id, rate); + break; + case SCLK_NANDC: + ret = px30_nandc_set_clk(priv, rate); + break; + case SCLK_PWM0: + case SCLK_PWM1: + ret = px30_pwm_set_clk(priv, clk->id, rate); + break; + case SCLK_SARADC: + ret = px30_saradc_set_clk(priv, rate); + break; + case SCLK_TSADC: + ret = px30_tsadc_set_clk(priv, rate); + break; + case SCLK_SPI0: + case SCLK_SPI1: + ret = px30_spi_set_clk(priv, clk->id, rate); + break; + case ACLK_VOPB: + case ACLK_VOPL: + case DCLK_VOPB: + case DCLK_VOPL: + ret = px30_vop_set_clk(priv, clk->id, rate); + break; + case ACLK_BUS_PRE: + case HCLK_BUS_PRE: + case PCLK_BUS_PRE: + ret = px30_bus_set_clk(priv, clk->id, rate); + break; + case ACLK_PERI_PRE: + case HCLK_PERI_PRE: + ret = px30_peri_set_clk(priv, clk->id, rate); + break; +#ifndef CONFIG_SPL_BUILD + case SCLK_CRYPTO: + case SCLK_CRYPTO_APK: + ret = px30_crypto_set_clk(priv, clk->id, rate); + break; + case SCLK_I2S1_OUT: + ret = px30_i2s1_mclk_set_clk(priv, clk->id, rate); + break; + case SCLK_GMAC: + case SCLK_GMAC_SRC: + ret = px30_mac_set_clk(priv, rate); + break; + case SCLK_GMAC_RMII: + ret = px30_mac_set_speed_clk(priv, rate); + break; +#endif + default: + return -ENOENT; + } + + return ret; +} + +#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) +static int px30_gmac_set_parent(struct clk *clk, struct clk *parent) +{ + struct px30_clk_priv *priv = dev_get_priv(clk->dev); + struct px30_cru *cru = priv->cru; + + if (parent->id == SCLK_GMAC_SRC) { + debug("%s: switching GAMC to SCLK_GMAC_SRC\n", __func__); + rk_clrsetreg(&cru->clksel_con[23], RMII_EXTCLK_SEL_MASK, + RMII_EXTCLK_SEL_INT << RMII_EXTCLK_SEL_SHIFT); + } else { + debug("%s: switching GMAC to external clock\n", __func__); + rk_clrsetreg(&cru->clksel_con[23], RMII_EXTCLK_SEL_MASK, + RMII_EXTCLK_SEL_EXT << RMII_EXTCLK_SEL_SHIFT); + } + return 0; +} + +static int px30_clk_set_parent(struct clk *clk, struct clk *parent) +{ + switch (clk->id) { + case SCLK_GMAC: + return px30_gmac_set_parent(clk, parent); + default: + return -ENOENT; + } +} +#endif + +static int px30_clk_enable(struct clk *clk) +{ + switch (clk->id) { + case HCLK_HOST: + case SCLK_GMAC: + case SCLK_GMAC_RX_TX: + case SCLK_MAC_REF: + case SCLK_MAC_REFOUT: + case ACLK_GMAC: + case PCLK_GMAC: + case SCLK_GMAC_RMII: + /* Required to successfully probe the Designware GMAC driver */ + return 0; + } + + debug("%s: unsupported clk %ld\n", __func__, clk->id); + return -ENOENT; +} + +static struct clk_ops px30_clk_ops = { + .get_rate = px30_clk_get_rate, + .set_rate = px30_clk_set_rate, +#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) + .set_parent = px30_clk_set_parent, +#endif + .enable = px30_clk_enable, +}; + +static void px30_clk_init(struct px30_clk_priv *priv) +{ + ulong npll_hz; + int ret; + + npll_hz = px30_clk_get_pll_rate(priv, NPLL); + if (npll_hz != NPLL_HZ) { + ret = px30_clk_set_pll_rate(priv, NPLL, NPLL_HZ); + if (ret < 0) + printf("%s failed to set npll rate\n", __func__); + } + + px30_bus_set_clk(priv, ACLK_BUS_PRE, ACLK_BUS_HZ); + px30_bus_set_clk(priv, HCLK_BUS_PRE, HCLK_BUS_HZ); + px30_bus_set_clk(priv, PCLK_BUS_PRE, PCLK_BUS_HZ); + px30_peri_set_clk(priv, ACLK_PERI_PRE, ACLK_PERI_HZ); + px30_peri_set_clk(priv, HCLK_PERI_PRE, HCLK_PERI_HZ); +} + +static int px30_clk_probe(struct udevice *dev) +{ + struct px30_clk_priv *priv = dev_get_priv(dev); + struct clk clk_gpll; + int ret; + + if (px30_clk_get_pll_rate(priv, APLL) != APLL_HZ) + px30_armclk_set_clk(priv, APLL_HZ); + + /* get the GPLL rate from the pmucru */ + ret = clk_get_by_name(dev, "gpll", &clk_gpll); + if (ret) { + printf("%s: failed to get gpll clk from pmucru\n", __func__); + return ret; + } + + priv->gpll_hz = clk_get_rate(&clk_gpll); + + px30_clk_init(priv); + + return 0; +} + +static int px30_clk_ofdata_to_platdata(struct udevice *dev) +{ + struct px30_clk_priv *priv = dev_get_priv(dev); + + priv->cru = dev_read_addr_ptr(dev); + + return 0; +} + +static int px30_clk_bind(struct udevice *dev) +{ + int ret; + struct udevice *sys_child; + struct sysreset_reg *priv; + + /* The reset driver does not have a device node, so bind it here */ + ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset", + &sys_child); + if (ret) { + debug("Warning: No sysreset driver: ret=%d\n", ret); + } else { + priv = malloc(sizeof(struct sysreset_reg)); + priv->glb_srst_fst_value = offsetof(struct px30_cru, + glb_srst_fst); + priv->glb_srst_snd_value = offsetof(struct px30_cru, + glb_srst_snd); + sys_child->priv = priv; + } + +#if CONFIG_IS_ENABLED(RESET_ROCKCHIP) + ret = offsetof(struct px30_cru, softrst_con[0]); + ret = rockchip_reset_bind(dev, ret, 12); + if (ret) + debug("Warning: software reset driver bind faile\n"); +#endif + + return 0; +} + +static const struct udevice_id px30_clk_ids[] = { + { .compatible = "rockchip,px30-cru" }, + { } +}; + +U_BOOT_DRIVER(rockchip_px30_cru) = { + .name = "rockchip_px30_cru", + .id = UCLASS_CLK, + .of_match = px30_clk_ids, + .priv_auto_alloc_size = sizeof(struct px30_clk_priv), + .ofdata_to_platdata = px30_clk_ofdata_to_platdata, + .ops = &px30_clk_ops, + .bind = px30_clk_bind, + .probe = px30_clk_probe, +}; + +static ulong px30_pclk_pmu_get_pmuclk(struct px30_pmuclk_priv *priv) +{ + struct px30_pmucru *pmucru = priv->pmucru; + u32 div, con; + + con = readl(&pmucru->pmu_clksel_con[0]); + div = (con & CLK_PMU_PCLK_DIV_MASK) >> CLK_PMU_PCLK_DIV_SHIFT; + + return DIV_TO_RATE(priv->gpll_hz, div); +} + +static ulong px30_pclk_pmu_set_pmuclk(struct px30_pmuclk_priv *priv, ulong hz) +{ + struct px30_pmucru *pmucru = priv->pmucru; + int src_clk_div; + + src_clk_div = DIV_ROUND_UP(priv->gpll_hz, hz); + assert(src_clk_div - 1 <= 31); + + rk_clrsetreg(&pmucru->pmu_clksel_con[0], + CLK_PMU_PCLK_DIV_MASK, + (src_clk_div - 1) << CLK_PMU_PCLK_DIV_SHIFT); + + return px30_pclk_pmu_get_pmuclk(priv); +} + +static ulong px30_pmuclk_get_gpll_rate(struct px30_pmuclk_priv *priv) +{ + struct px30_pmucru *pmucru = priv->pmucru; + + return rkclk_pll_get_rate(&pmucru->pll, &pmucru->pmu_mode, GPLL); +} + +static ulong px30_pmuclk_set_gpll_rate(struct px30_pmuclk_priv *priv, ulong hz) +{ + struct px30_pmucru *pmucru = priv->pmucru; + ulong pclk_pmu_rate; + u32 div; + + if (priv->gpll_hz == hz) + return priv->gpll_hz; + + div = DIV_ROUND_UP(hz, priv->gpll_hz); + + /* save clock rate */ + pclk_pmu_rate = px30_pclk_pmu_get_pmuclk(priv); + + /* avoid rate too large, reduce rate first */ + px30_pclk_pmu_set_pmuclk(priv, pclk_pmu_rate / div); + + /* change gpll rate */ + rkclk_set_pll(&pmucru->pll, &pmucru->pmu_mode, GPLL, hz); + priv->gpll_hz = px30_pmuclk_get_gpll_rate(priv); + + /* restore clock rate */ + px30_pclk_pmu_set_pmuclk(priv, pclk_pmu_rate); + + return priv->gpll_hz; +} + +static ulong px30_pmuclk_get_rate(struct clk *clk) +{ + struct px30_pmuclk_priv *priv = dev_get_priv(clk->dev); + ulong rate = 0; + + debug("%s %ld\n", __func__, clk->id); + switch (clk->id) { + case PLL_GPLL: + rate = px30_pmuclk_get_gpll_rate(priv); + break; + case PCLK_PMU_PRE: + rate = px30_pclk_pmu_get_pmuclk(priv); + break; + default: + return -ENOENT; + } + + return rate; +} + +static ulong px30_pmuclk_set_rate(struct clk *clk, ulong rate) +{ + struct px30_pmuclk_priv *priv = dev_get_priv(clk->dev); + ulong ret = 0; + + debug("%s %ld %ld\n", __func__, clk->id, rate); + switch (clk->id) { + case PLL_GPLL: + ret = px30_pmuclk_set_gpll_rate(priv, rate); + break; + case PCLK_PMU_PRE: + ret = px30_pclk_pmu_set_pmuclk(priv, rate); + break; + default: + return -ENOENT; + } + + return ret; +} + +static struct clk_ops px30_pmuclk_ops = { + .get_rate = px30_pmuclk_get_rate, + .set_rate = px30_pmuclk_set_rate, +}; + +static void px30_pmuclk_init(struct px30_pmuclk_priv *priv) +{ + priv->gpll_hz = px30_pmuclk_get_gpll_rate(priv); + px30_pmuclk_set_gpll_rate(priv, GPLL_HZ); + + px30_pclk_pmu_set_pmuclk(priv, PCLK_PMU_HZ); +} + +static int px30_pmuclk_probe(struct udevice *dev) +{ + struct px30_pmuclk_priv *priv = dev_get_priv(dev); + + px30_pmuclk_init(priv); + + return 0; +} + +static int px30_pmuclk_ofdata_to_platdata(struct udevice *dev) +{ + struct px30_pmuclk_priv *priv = dev_get_priv(dev); + + priv->pmucru = dev_read_addr_ptr(dev); + + return 0; +} + +static const struct udevice_id px30_pmuclk_ids[] = { + { .compatible = "rockchip,px30-pmucru" }, + { } +}; + +U_BOOT_DRIVER(rockchip_px30_pmucru) = { + .name = "rockchip_px30_pmucru", + .id = UCLASS_CLK, + .of_match = px30_pmuclk_ids, + .priv_auto_alloc_size = sizeof(struct px30_pmuclk_priv), + .ofdata_to_platdata = px30_pmuclk_ofdata_to_platdata, + .ops = &px30_pmuclk_ops, + .probe = px30_pmuclk_probe, +}; diff --git a/include/dt-bindings/clock/px30-cru.h b/include/dt-bindings/clock/px30-cru.h new file mode 100644 index 0000000000..e5e59690b5 --- /dev/null +++ b/include/dt-bindings/clock/px30-cru.h @@ -0,0 +1,389 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2017 Rockchip Electronics Co. Ltd. + * Author: Elaine + */ + +#ifndef _DT_BINDINGS_CLK_ROCKCHIP_PX30_H +#define _DT_BINDINGS_CLK_ROCKCHIP_PX30_H + +/* core clocks */ +#define PLL_APLL 1 +#define PLL_DPLL 2 +#define PLL_CPLL 3 +#define PLL_NPLL 4 +#define APLL_BOOST_H 5 +#define APLL_BOOST_L 6 +#define ARMCLK 7 + +/* sclk gates (special clocks) */ +#define USB480M 14 +#define SCLK_PDM 15 +#define SCLK_I2S0_TX 16 +#define SCLK_I2S0_TX_OUT 17 +#define SCLK_I2S0_RX 18 +#define SCLK_I2S0_RX_OUT 19 +#define SCLK_I2S1 20 +#define SCLK_I2S1_OUT 21 +#define SCLK_I2S2 22 +#define SCLK_I2S2_OUT 23 +#define SCLK_UART1 24 +#define SCLK_UART2 25 +#define SCLK_UART3 26 +#define SCLK_UART4 27 +#define SCLK_UART5 28 +#define SCLK_I2C0 29 +#define SCLK_I2C1 30 +#define SCLK_I2C2 31 +#define SCLK_I2C3 32 +#define SCLK_I2C4 33 +#define SCLK_PWM0 34 +#define SCLK_PWM1 35 +#define SCLK_SPI0 36 +#define SCLK_SPI1 37 +#define SCLK_TIMER0 38 +#define SCLK_TIMER1 39 +#define SCLK_TIMER2 40 +#define SCLK_TIMER3 41 +#define SCLK_TIMER4 42 +#define SCLK_TIMER5 43 +#define SCLK_TSADC 44 +#define SCLK_SARADC 45 +#define SCLK_OTP 46 +#define SCLK_OTP_USR 47 +#define SCLK_CRYPTO 48 +#define SCLK_CRYPTO_APK 49 +#define SCLK_DDRC 50 +#define SCLK_ISP 51 +#define SCLK_CIF_OUT 52 +#define SCLK_RGA_CORE 53 +#define SCLK_VOPB_PWM 54 +#define SCLK_NANDC 55 +#define SCLK_SDIO 56 +#define SCLK_EMMC 57 +#define SCLK_SFC 58 +#define SCLK_SDMMC 59 +#define SCLK_OTG_ADP 60 +#define SCLK_GMAC_SRC 61 +#define SCLK_GMAC 62 +#define SCLK_GMAC_RX_TX 63 +#define SCLK_MAC_REF 64 +#define SCLK_MAC_REFOUT 65 +#define SCLK_MAC_OUT 66 +#define SCLK_SDMMC_DRV 67 +#define SCLK_SDMMC_SAMPLE 68 +#define SCLK_SDIO_DRV 69 +#define SCLK_SDIO_SAMPLE 70 +#define SCLK_EMMC_DRV 71 +#define SCLK_EMMC_SAMPLE 72 +#define SCLK_GPU 73 +#define SCLK_PVTM 74 +#define SCLK_CORE_VPU 75 +#define SCLK_GMAC_RMII 76 +#define SCLK_UART2_SRC 77 +#define SCLK_NANDC_DIV 78 +#define SCLK_NANDC_DIV50 79 +#define SCLK_SDIO_DIV 80 +#define SCLK_SDIO_DIV50 81 +#define SCLK_EMMC_DIV 82 +#define SCLK_EMMC_DIV50 83 + +/* dclk gates */ +#define DCLK_VOPB 150 +#define DCLK_VOPL 151 + +/* aclk gates */ +#define ACLK_GPU 170 +#define ACLK_BUS_PRE 171 +#define ACLK_CRYPTO 172 +#define ACLK_VI_PRE 173 +#define ACLK_VO_PRE 174 +#define ACLK_VPU 175 +#define ACLK_PERI_PRE 176 +#define ACLK_GMAC 178 +#define ACLK_CIF 179 +#define ACLK_ISP 180 +#define ACLK_VOPB 181 +#define ACLK_VOPL 182 +#define ACLK_RGA 183 +#define ACLK_GIC 184 +#define ACLK_DCF 186 +#define ACLK_DMAC 187 + +/* hclk gates */ +#define HCLK_BUS_PRE 240 +#define HCLK_CRYPTO 241 +#define HCLK_VI_PRE 242 +#define HCLK_VO_PRE 243 +#define HCLK_VPU 244 +#define HCLK_PERI_PRE 245 +#define HCLK_MMC_NAND 246 +#define HCLK_SDMMC 247 +#define HCLK_USB 248 +#define HCLK_CIF 249 +#define HCLK_ISP 250 +#define HCLK_VOPB 251 +#define HCLK_VOPL 252 +#define HCLK_RGA 253 +#define HCLK_NANDC 254 +#define HCLK_SDIO 255 +#define HCLK_EMMC 256 +#define HCLK_SFC 257 +#define HCLK_OTG 258 +#define HCLK_HOST 259 +#define HCLK_HOST_ARB 260 +#define HCLK_PDM 261 +#define HCLK_I2S0 262 +#define HCLK_I2S1 263 +#define HCLK_I2S2 264 + +/* pclk gates */ +#define PCLK_BUS_PRE 320 +#define PCLK_DDR 321 +#define PCLK_VO_PRE 322 +#define PCLK_GMAC 323 +#define PCLK_MIPI_DSI 324 +#define PCLK_MIPIDSIPHY 325 +#define PCLK_MIPICSIPHY 326 +#define PCLK_USB_GRF 327 +#define PCLK_DCF 328 +#define PCLK_UART1 329 +#define PCLK_UART2 330 +#define PCLK_UART3 331 +#define PCLK_UART4 332 +#define PCLK_UART5 333 +#define PCLK_I2C0 334 +#define PCLK_I2C1 335 +#define PCLK_I2C2 336 +#define PCLK_I2C3 337 +#define PCLK_I2C4 338 +#define PCLK_PWM0 339 +#define PCLK_PWM1 340 +#define PCLK_SPI0 341 +#define PCLK_SPI1 342 +#define PCLK_SARADC 343 +#define PCLK_TSADC 344 +#define PCLK_TIMER 345 +#define PCLK_OTP_NS 346 +#define PCLK_WDT_NS 347 +#define PCLK_GPIO1 348 +#define PCLK_GPIO2 349 +#define PCLK_GPIO3 350 +#define PCLK_ISP 351 +#define PCLK_CIF 352 +#define PCLK_OTP_PHY 353 + +#define CLK_NR_CLKS (PCLK_OTP_PHY + 1) + +/* pmu-clocks indices */ + +#define PLL_GPLL 1 + +#define SCLK_RTC32K_PMU 4 +#define SCLK_WIFI_PMU 5 +#define SCLK_UART0_PMU 6 +#define SCLK_PVTM_PMU 7 +#define PCLK_PMU_PRE 8 +#define SCLK_REF24M_PMU 9 +#define SCLK_USBPHY_REF 10 +#define SCLK_MIPIDSIPHY_REF 11 + +#define XIN24M_DIV 12 + +#define PCLK_GPIO0_PMU 20 +#define PCLK_UART0_PMU 21 + +#define CLKPMU_NR_CLKS (PCLK_UART0_PMU + 1) + +/* soft-reset indices */ +#define SRST_CORE0_PO 0 +#define SRST_CORE1_PO 1 +#define SRST_CORE2_PO 2 +#define SRST_CORE3_PO 3 +#define SRST_CORE0 4 +#define SRST_CORE1 5 +#define SRST_CORE2 6 +#define SRST_CORE3 7 +#define SRST_CORE0_DBG 8 +#define SRST_CORE1_DBG 9 +#define SRST_CORE2_DBG 10 +#define SRST_CORE3_DBG 11 +#define SRST_TOPDBG 12 +#define SRST_CORE_NOC 13 +#define SRST_STRC_A 14 +#define SRST_L2C 15 + +#define SRST_DAP 16 +#define SRST_CORE_PVTM 17 +#define SRST_GPU 18 +#define SRST_GPU_NIU 19 +#define SRST_UPCTL2 20 +#define SRST_UPCTL2_A 21 +#define SRST_UPCTL2_P 22 +#define SRST_MSCH 23 +#define SRST_MSCH_P 24 +#define SRST_DDRMON_P 25 +#define SRST_DDRSTDBY_P 26 +#define SRST_DDRSTDBY 27 +#define SRST_DDRGRF_p 28 +#define SRST_AXI_SPLIT_A 29 +#define SRST_AXI_CMD_A 30 +#define SRST_AXI_CMD_P 31 + +#define SRST_DDRPHY 32 +#define SRST_DDRPHYDIV 33 +#define SRST_DDRPHY_P 34 +#define SRST_VPU_A 36 +#define SRST_VPU_NIU_A 37 +#define SRST_VPU_H 38 +#define SRST_VPU_NIU_H 39 +#define SRST_VI_NIU_A 40 +#define SRST_VI_NIU_H 41 +#define SRST_ISP_H 42 +#define SRST_ISP 43 +#define SRST_CIF_A 44 +#define SRST_CIF_H 45 +#define SRST_CIF_PCLKIN 46 +#define SRST_MIPICSIPHY_P 47 + +#define SRST_VO_NIU_A 48 +#define SRST_VO_NIU_H 49 +#define SRST_VO_NIU_P 50 +#define SRST_VOPB_A 51 +#define SRST_VOPB_H 52 +#define SRST_VOPB 53 +#define SRST_PWM_VOPB 54 +#define SRST_VOPL_A 55 +#define SRST_VOPL_H 56 +#define SRST_VOPL 57 +#define SRST_RGA_A 58 +#define SRST_RGA_H 59 +#define SRST_RGA 60 +#define SRST_MIPIDSI_HOST_P 61 +#define SRST_MIPIDSIPHY_P 62 +#define SRST_VPU_CORE 63 + +#define SRST_PERI_NIU_A 64 +#define SRST_USB_NIU_H 65 +#define SRST_USB2OTG_H 66 +#define SRST_USB2OTG 67 +#define SRST_USB2OTG_ADP 68 +#define SRST_USB2HOST_H 69 +#define SRST_USB2HOST_ARB_H 70 +#define SRST_USB2HOST_AUX_H 71 +#define SRST_USB2HOST_EHCI 72 +#define SRST_USB2HOST 73 +#define SRST_USBPHYPOR 74 +#define SRST_USBPHY_OTG_PORT 75 +#define SRST_USBPHY_HOST_PORT 76 +#define SRST_USBPHY_GRF 77 +#define SRST_CPU_BOOST_P 78 +#define SRST_CPU_BOOST 79 + +#define SRST_MMC_NAND_NIU_H 80 +#define SRST_SDIO_H 81 +#define SRST_EMMC_H 82 +#define SRST_SFC_H 83 +#define SRST_SFC 84 +#define SRST_SDCARD_NIU_H 85 +#define SRST_SDMMC_H 86 +#define SRST_NANDC_H 89 +#define SRST_NANDC 90 +#define SRST_GMAC_NIU_A 92 +#define SRST_GMAC_NIU_P 93 +#define SRST_GMAC_A 94 + +#define SRST_PMU_NIU_P 96 +#define SRST_PMU_SGRF_P 97 +#define SRST_PMU_GRF_P 98 +#define SRST_PMU 99 +#define SRST_PMU_MEM_P 100 +#define SRST_PMU_GPIO0_P 101 +#define SRST_PMU_UART0_P 102 +#define SRST_PMU_CRU_P 103 +#define SRST_PMU_PVTM 104 +#define SRST_PMU_UART 105 +#define SRST_PMU_NIU_H 106 +#define SRST_PMU_DDR_FAIL_SAVE 107 +#define SRST_PMU_CORE_PERF_A 108 +#define SRST_PMU_CORE_GRF_P 109 +#define SRST_PMU_GPU_PERF_A 110 +#define SRST_PMU_GPU_GRF_P 111 + +#define SRST_CRYPTO_NIU_A 112 +#define SRST_CRYPTO_NIU_H 113 +#define SRST_CRYPTO_A 114 +#define SRST_CRYPTO_H 115 +#define SRST_CRYPTO 116 +#define SRST_CRYPTO_APK 117 +#define SRST_BUS_NIU_H 120 +#define SRST_USB_NIU_P 121 +#define SRST_BUS_TOP_NIU_P 122 +#define SRST_INTMEM_A 123 +#define SRST_GIC_A 124 +#define SRST_ROM_H 126 +#define SRST_DCF_A 127 + +#define SRST_DCF_P 128 +#define SRST_PDM_H 129 +#define SRST_PDM 130 +#define SRST_I2S0_H 131 +#define SRST_I2S0_TX 132 +#define SRST_I2S1_H 133 +#define SRST_I2S1 134 +#define SRST_I2S2_H 135 +#define SRST_I2S2 136 +#define SRST_UART1_P 137 +#define SRST_UART1 138 +#define SRST_UART2_P 139 +#define SRST_UART2 140 +#define SRST_UART3_P 141 +#define SRST_UART3 142 +#define SRST_UART4_P 143 + +#define SRST_UART4 144 +#define SRST_UART5_P 145 +#define SRST_UART5 146 +#define SRST_I2C0_P 147 +#define SRST_I2C0 148 +#define SRST_I2C1_P 149 +#define SRST_I2C1 150 +#define SRST_I2C2_P 151 +#define SRST_I2C2 152 +#define SRST_I2C3_P 153 +#define SRST_I2C3 154 +#define SRST_PWM0_P 157 +#define SRST_PWM0 158 +#define SRST_PWM1_P 159 + +#define SRST_PWM1 160 +#define SRST_SPI0_P 161 +#define SRST_SPI0 162 +#define SRST_SPI1_P 163 +#define SRST_SPI1 164 +#define SRST_SARADC_P 165 +#define SRST_SARADC 166 +#define SRST_TSADC_P 167 +#define SRST_TSADC 168 +#define SRST_TIMER_P 169 +#define SRST_TIMER0 170 +#define SRST_TIMER1 171 +#define SRST_TIMER2 172 +#define SRST_TIMER3 173 +#define SRST_TIMER4 174 +#define SRST_TIMER5 175 + +#define SRST_OTP_NS_P 176 +#define SRST_OTP_NS_SBPI 177 +#define SRST_OTP_NS_USR 178 +#define SRST_OTP_PHY_P 179 +#define SRST_OTP_PHY 180 +#define SRST_WDT_NS_P 181 +#define SRST_GPIO1_P 182 +#define SRST_GPIO2_P 183 +#define SRST_GPIO3_P 184 +#define SRST_SGRF_P 185 +#define SRST_GRF_P 186 +#define SRST_I2S0_RX 191 + +#endif