From: Ley Foon Tan Date: Fri, 24 May 2019 02:30:00 +0000 (+0800) Subject: pci: intel: Fix configuration type based on secondary number X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d44f793207973845fdaa0c539bed785607659bab;p=u-boot.git pci: intel: Fix configuration type based on secondary number This fix issue when access config from PCIe switch. The PCIe controller need to send Type 0 config TLP if the targeting bus matches with the secondary bus number, which is when the TLP is targeting the immediate device on the link. The PCIe controller send Type 1 config TLP if the targeting bus is larger than the secondary bus, which is when the TLP is targeting the device not immediate on the link. Signed-off-by: Ley Foon Tan --- diff --git a/drivers/pci/pcie_intel_fpga.c b/drivers/pci/pcie_intel_fpga.c index a096d1c697..a5ea4888f3 100644 --- a/drivers/pci/pcie_intel_fpga.c +++ b/drivers/pci/pcie_intel_fpga.c @@ -36,16 +36,18 @@ #define RP_CFG_ADDR(pcie, reg) \ ((pcie->hip_base) + (reg) + (1 << 20)) +#define RP_SECONDARY(pcie) \ + readb(RP_CFG_ADDR(pcie, PCI_SECONDARY_BUS)) #define TLP_REQ_ID(bus, devfn) (((bus) << 8) | (devfn)) #define TLP_CFGRD_DW0(pcie, bus) \ - ((((bus != pcie->first_busno) ? TLP_FMTTYPE_CFGRD0 \ - : TLP_FMTTYPE_CFGRD1) << 24) | \ + ((((bus > RP_SECONDARY(pcie)) ? TLP_FMTTYPE_CFGRD1 \ + : TLP_FMTTYPE_CFGRD0) << 24) | \ TLP_PAYLOAD_SIZE) #define TLP_CFGWR_DW0(pcie, bus) \ - ((((bus != pcie->first_busno) ? TLP_FMTTYPE_CFGWR0 \ - : TLP_FMTTYPE_CFGWR1) << 24) | \ + ((((bus > RP_SECONDARY(pcie)) ? TLP_FMTTYPE_CFGWR1 \ + : TLP_FMTTYPE_CFGWR0) << 24) | \ TLP_PAYLOAD_SIZE) #define TLP_CFG_DW1(pcie, tag, be) \