From: Marek Vasut Date: Sat, 23 Feb 2013 02:43:00 +0000 (+0000) Subject: mxs: spi: Remove CONFIG_MXS_SPI_DMA_ENABLE X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d3f26a27003d55ce17ca54e84799fa18b965c3dc;p=u-boot.git mxs: spi: Remove CONFIG_MXS_SPI_DMA_ENABLE The CONFIG_MXS_SPI_DMA_ENABLE is no longer relevant as the SPI DMA has proven to work correctly. Remove this configuration option. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Otavio Salvador Cc: Stefano Babic --- diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c index b5b32dc5cc..ffa3c1d693 100644 --- a/drivers/spi/mxs_spi.c +++ b/drivers/spi/mxs_spi.c @@ -40,17 +40,6 @@ #define MXSSSP_SMALL_TRANSFER 512 -/* - * CONFIG_MXS_SPI_DMA_ENABLE: Experimental mixed PIO/DMA support for MXS SPI - * host. Use with utmost caution! - * - * Enabling this is not yet recommended since this - * still doesn't support transfers to/from unaligned - * addresses. Therefore this driver will not work - * for example with saving environment. This is - * caused by DMA alignment constraints on MXS. - */ - struct mxs_spi_slave { struct spi_slave slave; uint32_t max_khz; @@ -347,12 +336,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, char dummy; int write = 0; char *data = NULL; - -#ifdef CONFIG_MXS_SPI_DMA_ENABLE int dma = 1; -#else - int dma = 0; -#endif if (bitlen == 0) { if (flags & SPI_XFER_END) { diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index 1b51fe2dc5..59a7be931d 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -244,7 +244,6 @@ #ifdef CONFIG_CMD_SPI #define CONFIG_HARD_SPI #define CONFIG_MXS_SPI -#define CONFIG_MXS_SPI_DMA_ENABLE #define CONFIG_SPI_HALF_DUPLEX #define CONFIG_DEFAULT_SPI_BUS 2 #define CONFIG_DEFAULT_SPI_CS 0 diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 71447d910e..6a46f3c08a 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -202,7 +202,6 @@ #ifdef CONFIG_CMD_SPI #define CONFIG_HARD_SPI #define CONFIG_MXS_SPI -#define CONFIG_MXS_SPI_DMA_ENABLE #define CONFIG_SPI_HALF_DUPLEX #define CONFIG_DEFAULT_SPI_BUS 2 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0